x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 108 insertions, 0 deletions

diff --git a/Documentation/driver-api/soundwire/locking.rst b/Documentation/driver-api/soundwire/locking.rst
new file mode 100644
index 000000000..3a7ffb3d8
--- /dev/null
+++ b/Documentation/driver-api/soundwire/locking.rst
@@ -0,0 +1,108 @@
+=================
+SoundWire Locking
+=================
+
+This document explains locking mechanism of the SoundWire Bus. Bus uses
+following locks in order to avoid race conditions in Bus operations on
+shared resources.
+
+  - Bus lock
+
+  - Message lock
+
+Bus lock
+========
+
+SoundWire Bus lock is a mutex and is part of Bus data structure
+(sdw_bus) which is used for every Bus instance. This lock is used to
+serialize each of the following operations(s) within SoundWire Bus instance.
+
+  - Addition and removal of Slave(s), changing Slave status.
+
+  - Prepare, Enable, Disable and De-prepare stream operations.
+
+  - Access of Stream data structure.
+
+Message lock
+============
+
+SoundWire message transfer lock. This mutex is part of
+Bus data structure (sdw_bus). This lock is used to serialize the message
+transfers (read/write) within a SoundWire Bus instance.
+
+Below examples show how locks are acquired.
+
+Example 1
+---------
+
+Message transfer.
+
+  1. For every message transfer
+
+     a. Acquire Message lock.
+
+     b. Transfer message (Read/Write) to Slave1 or broadcast message on
+        Bus in case of bank switch.
+
+     c. Release Message lock
+
+     ::
+
+	+----------+                    +---------+
+	|          |                    |         |
+	|   Bus    |                    | Master  |
+	|          |                    | Driver  |
+	|          |                    |         |
+	+----+-----+                    +----+----+
+	     |                               |
+	     |     bus->ops->xfer_msg()      |
+	     <-------------------------------+   a. Acquire Message lock
+	     |                               |   b. Transfer message
+	     |                               |
+	     +------------------------------->   c. Release Message lock
+	     |    return success/error       |   d. Return success/error
+	     |                               |
+	     +                               +
+
+Example 2
+---------
+
+Prepare operation.
+
+  1. Acquire lock for Bus instance associated with Master 1.
+
+  2. For every message transfer in Prepare operation
+
+     a. Acquire Message lock.
+
+     b. Transfer message (Read/Write) to Slave1 or broadcast message on
+        Bus in case of bank switch.
+
+     c. Release Message lock.
+
+  3. Release lock for Bus instance associated with Master 1 ::
+
+	+----------+                    +---------+
+	|          |                    |         |
+	|   Bus    |                    | Master  |
+	|          |                    | Driver  |
+	|          |                    |         |
+	+----+-----+                    +----+----+
+	     |                               |
+	     |    sdw_prepare_stream()       |
+	     <-------------------------------+   1. Acquire bus lock
+	     |                               |   2. Perform stream prepare
+	     |                               |
+	     |                               |
+	     |     bus->ops->xfer_msg()      |
+	     <-------------------------------+   a. Acquire Message lock
+	     |                               |   b. Transfer message
+	     |                               |
+	     +------------------------------->   c. Release Message lock
+	     |    return success/error       |   d. Return success/error
+	     |                               |
+	     |                               |
+	     |    return success/error       |   3. Release bus lock
+	     +------------------------------->   4. Return success/error
+	     |                               |
+	     +                               +