arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 108 insertions, 0 deletions

diff --git a/Documentation/driver-api/soundwire/locking.rst b/Documentation/driver-api/soundwire/locking.rst
new file mode 100644
index 000000000..3a7ffb3d8
--- /dev/null
+++ b/Documentation/driver-api/soundwire/locking.rst
@@ -0,0 +1,108 @@
+=================
+SoundWire Locking
+=================
+
+This document explains locking mechanism of the SoundWire Bus. Bus uses
+following locks in order to avoid race conditions in Bus operations on
+shared resources.
+
+  - Bus lock
+
+  - Message lock
+
+Bus lock
+========
+
+SoundWire Bus lock is a mutex and is part of Bus data structure
+(sdw_bus) which is used for every Bus instance. This lock is used to
+serialize each of the following operations(s) within SoundWire Bus instance.
+
+  - Addition and removal of Slave(s), changing Slave status.
+
+  - Prepare, Enable, Disable and De-prepare stream operations.
+
+  - Access of Stream data structure.
+
+Message lock
+============
+
+SoundWire message transfer lock. This mutex is part of
+Bus data structure (sdw_bus). This lock is used to serialize the message
+transfers (read/write) within a SoundWire Bus instance.
+
+Below examples show how locks are acquired.
+
+Example 1
+---------
+
+Message transfer.
+
+  1. For every message transfer
+
+     a. Acquire Message lock.
+
+     b. Transfer message (Read/Write) to Slave1 or broadcast message on
+        Bus in case of bank switch.
+
+     c. Release Message lock
+
+     ::
+
+	+----------+                    +---------+
+	|          |                    |         |
+	|   Bus    |                    | Master  |
+	|          |                    | Driver  |
+	|          |                    |         |
+	+----+-----+                    +----+----+
+	     |                               |
+	     |     bus->ops->xfer_msg()      |
+	     <-------------------------------+   a. Acquire Message lock
+	     |                               |   b. Transfer message
+	     |                               |
+	     +------------------------------->   c. Release Message lock
+	     |    return success/error       |   d. Return success/error
+	     |                               |
+	     +                               +
+
+Example 2
+---------
+
+Prepare operation.
+
+  1. Acquire lock for Bus instance associated with Master 1.
+
+  2. For every message transfer in Prepare operation
+
+     a. Acquire Message lock.
+
+     b. Transfer message (Read/Write) to Slave1 or broadcast message on
+        Bus in case of bank switch.
+
+     c. Release Message lock.
+
+  3. Release lock for Bus instance associated with Master 1 ::
+
+	+----------+                    +---------+
+	|          |                    |         |
+	|   Bus    |                    | Master  |
+	|          |                    | Driver  |
+	|          |                    |         |
+	+----+-----+                    +----+----+
+	     |                               |
+	     |    sdw_prepare_stream()       |
+	     <-------------------------------+   1. Acquire bus lock
+	     |                               |   2. Perform stream prepare
+	     |                               |
+	     |                               |
+	     |     bus->ops->xfer_msg()      |
+	     <-------------------------------+   a. Acquire Message lock
+	     |                               |   b. Transfer message
+	     |                               |
+	     +------------------------------->   c. Release Message lock
+	     |    return success/error       |   d. Return success/error
+	     |                               |
+	     |                               |
+	     |    return success/error       |   3. Release bus lock
+	     +------------------------------->   4. Return success/error
+	     |                               |
+	     +                               +