Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 95 insertions, 0 deletions

diff --git a/Documentation/driver-api/pwrseq.rst b/Documentation/driver-api/pwrseq.rst
new file mode 100644
index 000000000..ad18b2326
--- /dev/null
+++ b/Documentation/driver-api/pwrseq.rst
@@ -0,0 +1,95 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright 2024 Linaro Ltd.
+
+====================
+Power Sequencing API
+====================
+
+:Author: Bartosz Golaszewski
+
+Introduction
+============
+
+This framework is designed to abstract complex power-up sequences that are
+shared between multiple logical devices in the Linux kernel.
+
+The intention is to allow consumers to obtain a power sequencing handle
+exposed by the power sequence provider and delegate the actual requesting and
+control of the underlying resources as well as to allow the provider to
+mitigate any potential conflicts between multiple users behind the scenes.
+
+Glossary
+--------
+
+The power sequencing API uses a number of terms specific to the subsystem:
+
+Unit
+
+    A unit is a discrete chunk of a power sequence. For instance one unit may
+    enable a set of regulators, another may enable a specific GPIO. Units can
+    define dependencies in the form of other units that must be enabled before
+    it itself can be.
+
+Target
+
+    A target is a set of units (composed of the "final" unit and its
+    dependencies) that a consumer selects by its name when requesting a handle
+    to the power sequencer. Via the dependency system, multiple targets may
+    share the same parts of a power sequence but ignore parts that are
+    irrelevant.
+
+Descriptor
+
+    A handle passed by the pwrseq core to every consumer that serves as the
+    entry point to the provider layer. It ensures coherence between different
+    users and keeps reference counting consistent.
+
+Consumer interface
+==================
+
+The consumer API is aimed to be as simple as possible. The driver interested in
+getting a descriptor from the power sequencer should call pwrseq_get() and
+specify the name of the target it wants to reach in the sequence after calling
+pwrseq_power_up(). The descriptor can be released by calling pwrseq_put() and
+the consumer can request the powering down of its target with
+pwrseq_power_off(). Note that there is no guarantee that pwrseq_power_off()
+will have any effect as there may be multiple users of the underlying resources
+who may keep them active.
+
+Provider interface
+==================
+
+The provider API is admittedly not nearly as straightforward as the one for
+consumers but it makes up for it in flexibility.
+
+Each provider can logically split the power-up sequence into discrete chunks
+(units) and define their dependencies. They can then expose named targets that
+consumers may use as the final point in the sequence that they wish to reach.
+
+To that end the providers fill out a set of configuration structures and
+register with the pwrseq subsystem by calling pwrseq_device_register().
+
+Dynamic consumer matching
+-------------------------
+
+The main difference between pwrseq and other Linux kernel providers is the
+mechanism for dynamic matching of consumers and providers. Every power sequence
+provider driver must implement the `match()` callback and pass it to the pwrseq
+core when registering with the subsystems.
+
+When a client requests a sequencer handle, the core will call this callback for
+every registered provider and let it flexibly figure out whether the proposed
+client device is indeed its consumer. For example: if the provider binds to the
+device-tree node representing a power management unit of a chipset and the
+consumer driver controls one of its modules, the provider driver may parse the
+relevant regulator supply properties in device tree and see if they lead from
+the PMU to the consumer.
+
+API reference
+=============
+
+.. kernel-doc:: include/linux/pwrseq/provider.h
+   :internal:
+
+.. kernel-doc:: drivers/power/sequencing/core.c
+   :export: