KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 127 insertions, 0 deletions

diff --git a/Documentation/driver-api/iio/buffers.rst b/Documentation/driver-api/iio/buffers.rst
new file mode 100644
index 000000000..8779022e3
--- /dev/null
+++ b/Documentation/driver-api/iio/buffers.rst
@@ -0,0 +1,127 @@
+=======
+Buffers
+=======
+
+* struct iio_buffer — general buffer structure
+* :c:func:`iio_validate_scan_mask_onehot` — Validates that exactly one channel
+  is selected
+* :c:func:`iio_buffer_get` — Grab a reference to the buffer
+* :c:func:`iio_buffer_put` — Release the reference to the buffer
+
+The Industrial I/O core offers a way for continuous data capture based on a
+trigger source. Multiple data channels can be read at once from
+:file:`/dev/iio:device{X}` character device node, thus reducing the CPU load.
+
+IIO buffer sysfs interface
+==========================
+An IIO buffer has an associated attributes directory under
+:file:`/sys/bus/iio/devices/iio:device{X}/buffer/*`. Here are some of the
+existing attributes:
+
+* :file:`length`, the total number of data samples (capacity) that can be
+  stored by the buffer.
+* :file:`enable`, activate buffer capture.
+
+IIO buffer setup
+================
+
+The meta information associated with a channel reading placed in a buffer is
+called a scan element. The important bits configuring scan elements are
+exposed to userspace applications via the
+:file:`/sys/bus/iio/devices/iio:device{X}/scan_elements/` directory. This
+directory contains attributes of the following form:
+
+* :file:`enable`, used for enabling a channel. If and only if its attribute
+  is non *zero*, then a triggered capture will contain data samples for this
+  channel.
+* :file:`index`, the scan_index of the channel.
+* :file:`type`, description of the scan element data storage within the buffer
+  and hence the form in which it is read from user space.
+  Format is [be|le]:[f|s|u]bits/storagebits[Xrepeat][>>shift] .
+
+  * *be* or *le*, specifies big or little endian.
+  * *f*, specifies if floating-point.
+  * *s* or *u*, specifies if signed (2's complement) or unsigned.
+  * *bits*, is the number of valid data bits.
+  * *storagebits*, is the number of bits (after padding) that it occupies in the
+    buffer.
+  * *repeat*, specifies the number of bits/storagebits repetitions. When the
+    repeat element is 0 or 1, then the repeat value is omitted.
+  * *shift*, if specified, is the shift that needs to be applied prior to
+    masking out unused bits.
+
+For example, a driver for a 3-axis accelerometer with 12 bit resolution where
+data is stored in two 8-bits registers as follows::
+
+        7   6   5   4   3   2   1   0
+      +---+---+---+---+---+---+---+---+
+      |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06)
+      +---+---+---+---+---+---+---+---+
+
+        7   6   5   4   3   2   1   0
+      +---+---+---+---+---+---+---+---+
+      |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07)
+      +---+---+---+---+---+---+---+---+
+
+will have the following scan element type for each axis::
+
+      $ cat /sys/bus/iio/devices/iio:device0/scan_elements/in_accel_y_type
+      le:s12/16>>4
+
+A user space application will interpret data samples read from the buffer as
+two byte little endian signed data, that needs a 4 bits right shift before
+masking out the 12 valid bits of data.
+
+For implementing buffer support a driver should initialize the following
+fields in iio_chan_spec definition::
+
+   struct iio_chan_spec {
+   /* other members */
+           int scan_index
+           struct {
+                   char format;
+                   u8 realbits;
+                   u8 storagebits;
+                   u8 shift;
+                   u8 repeat;
+                   enum iio_endian endianness;
+                  } scan_type;
+          };
+
+The driver implementing the accelerometer described above will have the
+following channel definition::
+
+   struct iio_chan_spec accel_channels[] = {
+           {
+                   .type = IIO_ACCEL,
+		   .modified = 1,
+		   .channel2 = IIO_MOD_X,
+		   /* other stuff here */
+		   .scan_index = 0,
+		   .scan_type = {
+		           .format = IIO_SCAN_FORMAT_SIGNED_INT,
+			   .realbits = 12,
+			   .storagebits = 16,
+			   .shift = 4,
+			   .endianness = IIO_LE,
+		   },
+           }
+           /* similar for Y (with channel2 = IIO_MOD_Y, scan_index = 1)
+            * and Z (with channel2 = IIO_MOD_Z, scan_index = 2) axis
+            */
+    }
+
+Here **scan_index** defines the order in which the enabled channels are placed
+inside the buffer. Channels with a lower **scan_index** will be placed before
+channels with a higher index. Each channel needs to have a unique
+**scan_index**.
+
+Setting **scan_index** to -1 can be used to indicate that the specific channel
+does not support buffered capture. In this case no entries will be created for
+the channel in the scan_elements directory.
+
+More details
+============
+.. kernel-doc:: include/linux/iio/buffer.h
+.. kernel-doc:: drivers/iio/industrialio-buffer.c
+   :export: