drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 60 insertions, 0 deletions

diff --git a/Documentation/driver-api/hw-recoverable-errors.rst b/Documentation/driver-api/hw-recoverable-errors.rst
new file mode 100644
index 000000000..fc526c345
--- /dev/null
+++ b/Documentation/driver-api/hw-recoverable-errors.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================================
+Recoverable Hardware Error Tracking in vmcoreinfo
+=================================================
+
+Overview
+--------
+
+This feature provides a generic infrastructure within the Linux kernel to track
+and log recoverable hardware errors. These are hardware recoverable errors
+visible that might not cause immediate panics but may influence health, mainly
+because new code path will be executed in the kernel.
+
+By recording counts and timestamps of recoverable errors into the vmcoreinfo
+crash dump notes, this infrastructure aids post-mortem crash analysis tools in
+correlating hardware events with kernel failures. This enables faster triage
+and better understanding of root causes, especially in large-scale cloud
+environments where hardware issues are common.
+
+Benefits
+--------
+
+- Facilitates correlation of hardware recoverable errors with kernel panics or
+  unusual code paths that lead to system crashes.
+- Provides operators and cloud providers quick insights, improving reliability
+  and reducing troubleshooting time.
+- Complements existing full hardware diagnostics without replacing them.
+
+Data Exposure and Consumption
+-----------------------------
+
+- The tracked error data consists of per-error-type counts and timestamps of
+  last occurrence.
+- This data is stored in the `hwerror_data` array, categorized by error source
+  types like CPU, memory, PCI, CXL, and others.
+- It is exposed via vmcoreinfo crash dump notes and can be read using tools
+  like `crash`, `drgn`, or other kernel crash analysis utilities.
+- There is no other way to read these data other than from crash dumps.
+- These errors are divided by area, which includes CPU, Memory, PCI, CXL and
+  others.
+
+Typical usage example (in drgn REPL):
+
+.. code-block:: python
+
+    >>> prog['hwerror_data']
+    (struct hwerror_info[HWERR_RECOV_MAX]){
+        {
+            .count = (int)844,
+            .timestamp = (time64_t)1752852018,
+        },
+        ...
+    }
+
+Enabling
+--------
+
+- This feature is enabled when CONFIG_VMCORE_INFO is set.
+