KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/driver-api/fpga/intro.rst b/Documentation/driver-api/fpga/intro.rst
new file mode 100644
index 000000000..f54c7dabc
--- /dev/null
+++ b/Documentation/driver-api/fpga/intro.rst
@@ -0,0 +1,54 @@
+Introduction
+============
+
+The FPGA subsystem supports reprogramming FPGAs dynamically under
+Linux.  Some of the core intentions of the FPGA subsystems are:
+
+* The FPGA subsystem is vendor agnostic.
+
+* The FPGA subsystem separates upper layers (userspace interfaces and
+  enumeration) from lower layers that know how to program a specific
+  FPGA.
+
+* Code should not be shared between upper and lower layers.  This
+  should go without saying.  If that seems necessary, there's probably
+  framework functionality that can be added that will benefit
+  other users.  Write the linux-fpga mailing list and maintainers and
+  seek out a solution that expands the framework for broad reuse.
+
+* Generally, when adding code, think of the future.  Plan for reuse.
+
+The framework in the kernel is divided into:
+
+FPGA Manager
+------------
+
+If you are adding a new FPGA or a new method of programming an FPGA,
+this is the subsystem for you.  Low level FPGA manager drivers contain
+the knowledge of how to program a specific device.  This subsystem
+includes the framework in fpga-mgr.c and the low level drivers that
+are registered with it.
+
+FPGA Bridge
+-----------
+
+FPGA Bridges prevent spurious signals from going out of an FPGA or a
+region of an FPGA during programming.  They are disabled before
+programming begins and re-enabled afterwards.  An FPGA bridge may be
+actual hard hardware that gates a bus to a CPU or a soft ("freeze")
+bridge in FPGA fabric that surrounds a partial reconfiguration region
+of an FPGA.  This subsystem includes fpga-bridge.c and the low level
+drivers that are registered with it.
+
+FPGA Region
+-----------
+
+If you are adding a new interface to the FPGA framework, add it on top
+of an FPGA region.
+
+The FPGA Region framework (fpga-region.c) associates managers and
+bridges as reconfigurable regions.  A region may refer to the whole
+FPGA in full reconfiguration or to a partial reconfiguration region.
+
+The Device Tree FPGA Region support (of-fpga-region.c) handles
+reprogramming FPGAs when device tree overlays are applied.