Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 107 insertions, 0 deletions

diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst
new file mode 100644
index 000000000..fb4da4240
--- /dev/null
+++ b/Documentation/driver-api/fpga/fpga-programming.rst
@@ -0,0 +1,107 @@
+In-kernel API for FPGA Programming
+==================================
+
+Overview
+--------
+
+The in-kernel API for FPGA programming is a combination of APIs from
+FPGA manager, bridge, and regions.  The actual function used to
+trigger FPGA programming is fpga_region_program_fpga().
+
+fpga_region_program_fpga() uses functionality supplied by
+the FPGA manager and bridges.  It will:
+
+ * lock the region's mutex
+ * lock the mutex of the region's FPGA manager
+ * build a list of FPGA bridges if a method has been specified to do so
+ * disable the bridges
+ * program the FPGA using info passed in :c:expr:`fpga_region->info`.
+ * re-enable the bridges
+ * release the locks
+
+The struct fpga_image_info specifies what FPGA image to program.  It is
+allocated/freed by fpga_image_info_alloc() and freed with
+fpga_image_info_free()
+
+How to program an FPGA using a region
+-------------------------------------
+
+When the FPGA region driver probed, it was given a pointer to an FPGA manager
+driver so it knows which manager to use.  The region also either has a list of
+bridges to control during programming or it has a pointer to a function that
+will generate that list.  Here's some sample code of what to do next::
+
+	#include <linux/fpga/fpga-mgr.h>
+	#include <linux/fpga/fpga-region.h>
+
+	struct fpga_image_info *info;
+	int ret;
+
+	/*
+	 * First, alloc the struct with information about the FPGA image to
+	 * program.
+	 */
+	info = fpga_image_info_alloc(dev);
+	if (!info)
+		return -ENOMEM;
+
+	/* Set flags as needed, such as: */
+	info->flags = FPGA_MGR_PARTIAL_RECONFIG;
+
+	/*
+	 * Indicate where the FPGA image is. This is pseudo-code; you're
+	 * going to use one of these three.
+	 */
+	if (image is in a scatter gather table) {
+
+		info->sgt = [your scatter gather table]
+
+	} else if (image is in a buffer) {
+
+		info->buf = [your image buffer]
+		info->count = [image buffer size]
+
+	} else if (image is in a firmware file) {
+
+		info->firmware_name = devm_kstrdup(dev, firmware_name,
+						   GFP_KERNEL);
+
+	}
+
+	/* Add info to region and do the programming */
+	region->info = info;
+	ret = fpga_region_program_fpga(region);
+
+	/* Deallocate the image info if you're done with it */
+	region->info = NULL;
+	fpga_image_info_free(info);
+
+	if (ret)
+		return ret;
+
+	/* Now enumerate whatever hardware has appeared in the FPGA. */
+
+API for programming an FPGA
+---------------------------
+
+* fpga_region_program_fpga() -  Program an FPGA
+* fpga_image_info() -  Specifies what FPGA image to program
+* fpga_image_info_alloc() -  Allocate an FPGA image info struct
+* fpga_image_info_free() -  Free an FPGA image info struct
+
+.. kernel-doc:: drivers/fpga/fpga-region.c
+   :functions: fpga_region_program_fpga
+
+FPGA Manager flags
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+   :doc: FPGA Manager flags
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+   :functions: fpga_image_info
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+   :functions: fpga_image_info_alloc
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+   :functions: fpga_image_info_free