virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 120 insertions, 0 deletions

diff --git a/Documentation/driver-api/driver-model/device.rst b/Documentation/driver-api/driver-model/device.rst
new file mode 100644
index 000000000..0833be568
--- /dev/null
+++ b/Documentation/driver-api/driver-model/device.rst
@@ -0,0 +1,120 @@
+==========================
+The Basic Device Structure
+==========================
+
+See the kerneldoc for the struct device.
+
+
+Programming Interface
+~~~~~~~~~~~~~~~~~~~~~
+The bus driver that discovers the device uses this to register the
+device with the core::
+
+  int device_register(struct device * dev);
+
+The bus should initialize the following fields:
+
+    - parent
+    - name
+    - bus_id
+    - bus
+
+A device is removed from the core when its reference count goes to
+0. The reference count can be adjusted using::
+
+  struct device * get_device(struct device * dev);
+  void put_device(struct device * dev);
+
+get_device() will return a pointer to the struct device passed to it
+if the reference is not already 0 (if it's in the process of being
+removed already).
+
+A driver can access the lock in the device structure using::
+
+  void lock_device(struct device * dev);
+  void unlock_device(struct device * dev);
+
+
+Attributes
+~~~~~~~~~~
+
+::
+
+  struct device_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
+  };
+
+Attributes of devices can be exported by a device driver through sysfs.
+
+Please see Documentation/filesystems/sysfs.rst for more information
+on how sysfs works.
+
+As explained in Documentation/core-api/kobject.rst, device attributes must be
+created before the KOBJ_ADD uevent is generated. The only way to realize
+that is by defining an attribute group.
+
+Attributes are declared using a macro called DEVICE_ATTR::
+
+  #define DEVICE_ATTR(name,mode,show,store)
+
+Example:::
+
+  static DEVICE_ATTR(type, 0444, type_show, NULL);
+  static DEVICE_ATTR(power, 0644, power_show, power_store);
+
+Helper macros are available for common values of mode, so the above examples
+can be simplified to:::
+
+  static DEVICE_ATTR_RO(type);
+  static DEVICE_ATTR_RW(power);
+
+This declares two structures of type struct device_attribute with respective
+names 'dev_attr_type' and 'dev_attr_power'. These two attributes can be
+organized as follows into a group::
+
+  static struct attribute *dev_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_power.attr,
+	NULL,
+  };
+
+  static struct attribute_group dev_group = {
+	.attrs = dev_attrs,
+  };
+
+  static const struct attribute_group *dev_groups[] = {
+	&dev_group,
+	NULL,
+  };
+
+A helper macro is available for the common case of a single group, so the
+above two structures can be declared using:::
+
+  ATTRIBUTE_GROUPS(dev);
+
+This array of groups can then be associated with a device by setting the
+group pointer in struct device before device_register() is invoked::
+
+        dev->groups = dev_groups;
+        device_register(dev);
+
+The device_register() function will use the 'groups' pointer to create the
+device attributes and the device_unregister() function will use this pointer
+to remove the device attributes.
+
+Word of warning:  While the kernel allows device_create_file() and
+device_remove_file() to be called on a device at any time, userspace has
+strict expectations on when attributes get created.  When a new device is
+registered in the kernel, a uevent is generated to notify userspace (like
+udev) that a new device is available.  If attributes are added after the
+device is registered, then userspace won't get notified and userspace will
+not know about the new attributes.
+
+This is important for device driver that need to publish additional
+attributes for a device at driver probe time.  If the device driver simply
+calls device_create_file() on the device structure passed to it, then
+userspace will never be notified of the new attributes.