arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 146 insertions, 0 deletions

diff --git a/Documentation/driver-api/driver-model/bus.rst b/Documentation/driver-api/driver-model/bus.rst
new file mode 100644
index 000000000..9709ab62a
--- /dev/null
+++ b/Documentation/driver-api/driver-model/bus.rst
@@ -0,0 +1,146 @@
+=========
+Bus Types
+=========
+
+Definition
+~~~~~~~~~~
+See the kerneldoc for the struct bus_type.
+
+int bus_register(struct bus_type * bus);
+
+
+Declaration
+~~~~~~~~~~~
+
+Each bus type in the kernel (PCI, USB, etc) should declare one static
+object of this type. They must initialize the name field, and may
+optionally initialize the match callback::
+
+   struct bus_type pci_bus_type = {
+          .name	= "pci",
+          .match	= pci_bus_match,
+   };
+
+The structure should be exported to drivers in a header file:
+
+extern struct bus_type pci_bus_type;
+
+
+Registration
+~~~~~~~~~~~~
+
+When a bus driver is initialized, it calls bus_register. This
+initializes the rest of the fields in the bus object and inserts it
+into a global list of bus types. Once the bus object is registered,
+the fields in it are usable by the bus driver.
+
+
+Callbacks
+~~~~~~~~~
+
+match(): Attaching Drivers to Devices
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The format of device ID structures and the semantics for comparing
+them are inherently bus-specific. Drivers typically declare an array
+of device IDs of devices they support that reside in a bus-specific
+driver structure.
+
+The purpose of the match callback is to give the bus an opportunity to
+determine if a particular driver supports a particular device by
+comparing the device IDs the driver supports with the device ID of a
+particular device, without sacrificing bus-specific functionality or
+type-safety.
+
+When a driver is registered with the bus, the bus's list of devices is
+iterated over, and the match callback is called for each device that
+does not have a driver associated with it.
+
+
+
+Device and Driver Lists
+~~~~~~~~~~~~~~~~~~~~~~~
+
+The lists of devices and drivers are intended to replace the local
+lists that many buses keep. They are lists of struct devices and
+struct device_drivers, respectively. Bus drivers are free to use the
+lists as they please, but conversion to the bus-specific type may be
+necessary.
+
+The LDM core provides helper functions for iterating over each list::
+
+  int bus_for_each_dev(struct bus_type * bus, struct device * start,
+		       void * data,
+		       int (*fn)(struct device *, void *));
+
+  int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
+		       void * data, int (*fn)(struct device_driver *, void *));
+
+These helpers iterate over the respective list, and call the callback
+for each device or driver in the list. All list accesses are
+synchronized by taking the bus's lock (read currently). The reference
+count on each object in the list is incremented before the callback is
+called; it is decremented after the next object has been obtained. The
+lock is not held when calling the callback.
+
+
+sysfs
+~~~~~~~~
+There is a top-level directory named 'bus'.
+
+Each bus gets a directory in the bus directory, along with two default
+directories::
+
+	/sys/bus/pci/
+	|-- devices
+	`-- drivers
+
+Drivers registered with the bus get a directory in the bus's drivers
+directory::
+
+	/sys/bus/pci/
+	|-- devices
+	`-- drivers
+	    |-- Intel ICH
+	    |-- Intel ICH Joystick
+	    |-- agpgart
+	    `-- e100
+
+Each device that is discovered on a bus of that type gets a symlink in
+the bus's devices directory to the device's directory in the physical
+hierarchy::
+
+	/sys/bus/pci/
+	|-- devices
+	|   |-- 00:00.0 -> ../../../root/pci0/00:00.0
+	|   |-- 00:01.0 -> ../../../root/pci0/00:01.0
+	|   `-- 00:02.0 -> ../../../root/pci0/00:02.0
+	`-- drivers
+
+
+Exporting Attributes
+~~~~~~~~~~~~~~~~~~~~
+
+::
+
+  struct bus_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(const struct bus_type *, char * buf);
+	ssize_t (*store)(const struct bus_type *, const char * buf, size_t count);
+  };
+
+Bus drivers can export attributes using the BUS_ATTR_RW macro that works
+similarly to the DEVICE_ATTR_RW macro for devices. For example, a
+definition like this::
+
+	static BUS_ATTR_RW(debug);
+
+is equivalent to declaring::
+
+	static bus_attribute bus_attr_debug;
+
+This can then be used to add and remove the attribute from the bus's
+sysfs directory using::
+
+	int bus_create_file(struct bus_type *, struct bus_attribute *);
+	void bus_remove_file(struct bus_type *, struct bus_attribute *);