Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

1 files changed, 397 insertions, 0 deletions

diff --git a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst
new file mode 100644
index 000000000..5ee5d4a35
--- /dev/null
+++ b/Documentation/driver-api/dmaengine/client.rst
@@ -0,0 +1,397 @@
+====================
+DMA Engine API Guide
+====================
+
+Vinod Koul <vinod dot koul at intel.com>
+
+.. note:: For DMA Engine usage in async_tx please see:
+          ``Documentation/crypto/async-tx-api.rst``
+
+
+Below is a guide to device driver writers on how to use the Slave-DMA API of the
+DMA Engine. This is applicable only for slave DMA usage only.
+
+DMA usage
+=========
+
+The slave DMA usage consists of following steps:
+
+- Allocate a DMA slave channel
+
+- Set slave and controller specific parameters
+
+- Get a descriptor for transaction
+
+- Submit the transaction
+
+- Issue pending requests and wait for callback notification
+
+The details of these operations are:
+
+1. Allocate a DMA slave channel
+
+   Channel allocation is slightly different in the slave DMA context,
+   client drivers typically need a channel from a particular DMA
+   controller only and even in some cases a specific channel is desired.
+   To request a channel dma_request_chan() API is used.
+
+   Interface:
+
+   .. code-block:: c
+
+      struct dma_chan *dma_request_chan(struct device *dev, const char *name);
+
+   Which will find and return the ``name`` DMA channel associated with the 'dev'
+   device. The association is done via DT, ACPI or board file based
+   dma_slave_map matching table.
+
+   A channel allocated via this interface is exclusive to the caller,
+   until dma_release_channel() is called.
+
+2. Set slave and controller specific parameters
+
+   Next step is always to pass some specific information to the DMA
+   driver. Most of the generic information which a slave DMA can use
+   is in struct dma_slave_config. This allows the clients to specify
+   DMA direction, DMA addresses, bus widths, DMA burst lengths etc
+   for the peripheral.
+
+   If some DMA controllers have more parameters to be sent then they
+   should try to embed struct dma_slave_config in their controller
+   specific structure. That gives flexibility to client to pass more
+   parameters, if required.
+
+   Interface:
+
+   .. code-block:: c
+
+      int dmaengine_slave_config(struct dma_chan *chan,
+			struct dma_slave_config *config)
+
+   Please see the dma_slave_config structure definition in dmaengine.h
+   for a detailed explanation of the struct members. Please note
+   that the 'direction' member will be going away as it duplicates the
+   direction given in the prepare call.
+
+3. Get a descriptor for transaction
+
+  For slave usage the various modes of slave transfers supported by the
+  DMA-engine are:
+
+  - slave_sg: DMA a list of scatter gather buffers from/to a peripheral
+
+  - config_sg: Similar with slave_sg, just pass down dma_slave_config
+    struct to avoid calling dmaengine_slave_config() every time adjusting the
+    burst length or the FIFO address is needed.
+
+  - peripheral_dma_vec: DMA an array of scatter gather buffers from/to a
+    peripheral. Similar to slave_sg, but uses an array of dma_vec
+    structures instead of a scatterlist.
+
+  - dma_cyclic: Perform a cyclic DMA operation from/to a peripheral till the
+    operation is explicitly stopped.
+
+  - interleaved_dma: This is common to Slave as well as M2M clients. For slave
+    address of devices' fifo could be already known to the driver.
+    Various types of operations could be expressed by setting
+    appropriate values to the 'dma_interleaved_template' members. Cyclic
+    interleaved DMA transfers are also possible if supported by the channel by
+    setting the DMA_PREP_REPEAT transfer flag.
+
+  A non-NULL return of this transfer API represents a "descriptor" for
+  the given transaction.
+
+  Interface:
+
+  .. code-block:: c
+
+     struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned long flags);
+
+     struct dma_async_tx_descriptor *dmaengine_prep_config_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction dir,
+		unsigned long flags, struct dma_slave_config *config);
+
+     struct dma_async_tx_descriptor *dmaengine_prep_peripheral_dma_vec(
+		struct dma_chan *chan, const struct dma_vec *vecs,
+		size_t nents, enum dma_data_direction direction,
+		unsigned long flags);
+
+     struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+		size_t period_len, enum dma_data_direction direction);
+
+     struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
+		struct dma_chan *chan, struct dma_interleaved_template *xt,
+		unsigned long flags);
+
+  The peripheral driver is expected to have mapped the scatterlist for
+  the DMA operation prior to calling dmaengine_prep_slave_sg(), and must
+  keep the scatterlist mapped until the DMA operation has completed.
+  The scatterlist must be mapped using the DMA struct device.
+  If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
+  called using the DMA struct device, too.
+  So, normal setup should look like this:
+
+  .. code-block:: c
+
+     struct device *dma_dev = dmaengine_get_dma_device(chan);
+
+     nr_sg = dma_map_sg(dma_dev, sgl, sg_len);
+	if (nr_sg == 0)
+		/* error */
+
+	desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags);
+
+  Once a descriptor has been obtained, the callback information can be
+  added and the descriptor must then be submitted. Some DMA engine
+  drivers may hold a spinlock between a successful preparation and
+  submission so it is important that these two operations are closely
+  paired.
+
+  .. note::
+
+     Although the async_tx API specifies that completion callback
+     routines cannot submit any new operations, this is not the
+     case for slave/cyclic DMA.
+
+     For slave DMA, the subsequent transaction may not be available
+     for submission prior to callback function being invoked, so
+     slave DMA callbacks are permitted to prepare and submit a new
+     transaction.
+
+     For cyclic DMA, a callback function may wish to terminate the
+     DMA via dmaengine_terminate_async().
+
+     Therefore, it is important that DMA engine drivers drop any
+     locks before calling the callback function which may cause a
+     deadlock.
+
+     Note that callbacks will always be invoked from the DMA
+     engines tasklet, never from interrupt context.
+
+  **Optional: per descriptor metadata**
+
+  DMAengine provides two ways for metadata support.
+
+  DESC_METADATA_CLIENT
+
+    The metadata buffer is allocated/provided by the client driver and it is
+    attached to the descriptor.
+
+  .. code-block:: c
+
+     int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc,
+				   void *data, size_t len);
+
+  DESC_METADATA_ENGINE
+
+    The metadata buffer is allocated/managed by the DMA driver. The client
+    driver can ask for the pointer, maximum size and the currently used size of
+    the metadata and can directly update or read it.
+
+    Because the DMA driver manages the memory area containing the metadata,
+    clients must make sure that they do not try to access or get the pointer
+    after their transfer completion callback has run for the descriptor.
+    If no completion callback has been defined for the transfer, then the
+    metadata must not be accessed after issue_pending.
+    In other words: if the aim is to read back metadata after the transfer is
+    completed, then the client must use completion callback.
+
+  .. code-block:: c
+
+     void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc,
+		size_t *payload_len, size_t *max_len);
+
+     int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc,
+		size_t payload_len);
+
+  Client drivers can query if a given mode is supported with:
+
+  .. code-block:: c
+
+     bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
+		enum dma_desc_metadata_mode mode);
+
+  Depending on the used mode client drivers must follow different flow.
+
+  DESC_METADATA_CLIENT
+
+    - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
+
+      1. prepare the descriptor (dmaengine_prep_*)
+         construct the metadata in the client's buffer
+      2. use dmaengine_desc_attach_metadata() to attach the buffer to the
+         descriptor
+      3. submit the transfer
+
+    - DMA_DEV_TO_MEM:
+
+      1. prepare the descriptor (dmaengine_prep_*)
+      2. use dmaengine_desc_attach_metadata() to attach the buffer to the
+         descriptor
+      3. submit the transfer
+      4. when the transfer is completed, the metadata should be available in the
+         attached buffer
+
+  DESC_METADATA_ENGINE
+
+    - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
+
+      1. prepare the descriptor (dmaengine_prep_*)
+      2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the
+         engine's metadata area
+      3. update the metadata at the pointer
+      4. use dmaengine_desc_set_metadata_len()  to tell the DMA engine the
+         amount of data the client has placed into the metadata buffer
+      5. submit the transfer
+
+    - DMA_DEV_TO_MEM:
+
+      1. prepare the descriptor (dmaengine_prep_*)
+      2. submit the transfer
+      3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get
+         the pointer to the engine's metadata area
+      4. read out the metadata from the pointer
+
+  .. note::
+
+     When DESC_METADATA_ENGINE mode is used the metadata area for the descriptor
+     is no longer valid after the transfer has been completed (valid up to the
+     point when the completion callback returns if used).
+
+     Mixed use of DESC_METADATA_CLIENT / DESC_METADATA_ENGINE is not allowed,
+     client drivers must use either of the modes per descriptor.
+
+4. Submit the transaction
+
+   Once the descriptor has been prepared and the callback information
+   added, it must be placed on the DMA engine drivers pending queue.
+
+   Interface:
+
+   .. code-block:: c
+
+      dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
+
+   This returns a cookie can be used to check the progress of DMA engine
+   activity via other DMA engine calls not covered in this document.
+
+   dmaengine_submit() will not start the DMA operation, it merely adds
+   it to the pending queue. For this, see step 5, dma_async_issue_pending.
+
+   .. note::
+
+      After calling ``dmaengine_submit()`` the submitted transfer descriptor
+      (``struct dma_async_tx_descriptor``) belongs to the DMA engine.
+      Consequently, the client must consider invalid the pointer to that
+      descriptor.
+
+5. Issue pending DMA requests and wait for callback notification
+
+   The transactions in the pending queue can be activated by calling the
+   issue_pending API. If channel is idle then the first transaction in
+   queue is started and subsequent ones queued up.
+
+   On completion of each DMA operation, the next in queue is started and
+   a tasklet triggered. The tasklet will then call the client driver
+   completion callback routine for notification, if set.
+
+   Interface:
+
+   .. code-block:: c
+
+      void dma_async_issue_pending(struct dma_chan *chan);
+
+Further APIs
+------------
+
+1. Terminate APIs
+
+   .. code-block:: c
+
+      int dmaengine_terminate_sync(struct dma_chan *chan)
+      int dmaengine_terminate_async(struct dma_chan *chan)
+      int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
+
+   This causes all activity for the DMA channel to be stopped, and may
+   discard data in the DMA FIFO which hasn't been fully transferred.
+   No callback functions will be called for any incomplete transfers.
+
+   Two variants of this function are available.
+
+   dmaengine_terminate_async() might not wait until the DMA has been fully
+   stopped or until any running complete callbacks have finished. But it is
+   possible to call dmaengine_terminate_async() from atomic context or from
+   within a complete callback. dmaengine_synchronize() must be called before it
+   is safe to free the memory accessed by the DMA transfer or free resources
+   accessed from within the complete callback.
+
+   dmaengine_terminate_sync() will wait for the transfer and any running
+   complete callbacks to finish before it returns. But the function must not be
+   called from atomic context or from within a complete callback.
+
+   dmaengine_terminate_all() is deprecated and should not be used in new code.
+
+2. Pause API
+
+   .. code-block:: c
+
+      int dmaengine_pause(struct dma_chan *chan)
+
+   This pauses activity on the DMA channel without data loss.
+
+3. Resume API
+
+   .. code-block:: c
+
+       int dmaengine_resume(struct dma_chan *chan)
+
+   Resume a previously paused DMA channel. It is invalid to resume a
+   channel which is not currently paused.
+
+4. Check Txn complete
+
+   .. code-block:: c
+
+      enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
+		dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
+
+   This can be used to check the status of the channel. Please see
+   the documentation in include/linux/dmaengine.h for a more complete
+   description of this API.
+
+   This can be used in conjunction with dma_async_is_complete() and
+   the cookie returned from dmaengine_submit() to check for
+   completion of a specific DMA transaction.
+
+   .. note::
+
+      Not all DMA engine drivers can return reliable information for
+      a running DMA channel. It is recommended that DMA engine users
+      pause or stop (via dmaengine_terminate_all()) the channel before
+      using this API.
+
+5. Synchronize termination API
+
+   .. code-block:: c
+
+      void dmaengine_synchronize(struct dma_chan *chan)
+
+   Synchronize the termination of the DMA channel to the current context.
+
+   This function should be used after dmaengine_terminate_async() to synchronize
+   the termination of the DMA channel to the current context. The function will
+   wait for the transfer and any running complete callbacks to finish before it
+   returns.
+
+   If dmaengine_terminate_async() is used to stop the DMA channel this function
+   must be called before it is safe to free memory accessed by previously
+   submitted descriptors or to free any resources accessed within the complete
+   callback of previously submitted descriptors.
+
+   The behavior of this function is undefined if dma_async_issue_pending() has
+   been called between dmaengine_terminate_async() and this function.