openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

1 files changed, 81 insertions, 0 deletions

diff --git a/Documentation/driver-api/backlight/lp855x-driver.rst b/Documentation/driver-api/backlight/lp855x-driver.rst
new file mode 100644
index 000000000..1e0b224fc
--- /dev/null
+++ b/Documentation/driver-api/backlight/lp855x-driver.rst
@@ -0,0 +1,81 @@
+====================
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+
+	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+	LP8557
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+  Brightness can be controlled by the pwm input or the i2c command.
+  The lp855x driver supports both cases.
+
+* Device attributes
+
+  1) bl_ctl_mode
+
+  Backlight control mode.
+
+  Value: pwm based or register based
+
+  2) chip_id
+
+  The lp855x chip id.
+
+  Value: lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name:
+	Backlight driver name. If it is not defined, default name is set.
+* device_control:
+	Value of DEVICE CONTROL register.
+* initial_brightness:
+	Initial value of backlight brightness.
+* period_ns:
+	Platform specific PWM period value. unit is nano.
+	Only valid when brightness is pwm input mode.
+* size_program:
+	Total size of lp855x_rom_data.
+* rom_data:
+	List of new eeprom/eprom registers.
+
+Examples
+========
+
+1) lp8552 platform data: i2c register mode with new eeprom data::
+
+    #define EEPROM_A5_ADDR	0xA5
+    #define EEPROM_A5_VAL	0x4f	/* EN_VSYNC=0 */
+
+    static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+	{EEPROM_A5_ADDR, EEPROM_A5_VAL},
+    };
+
+    static struct lp855x_platform_data lp8552_pdata = {
+	.name = "lcd-bl",
+	.device_control = I2C_CONFIG(LP8552),
+	.initial_brightness = INITIAL_BRT,
+	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+	.rom_data = lp8552_eeprom_arr,
+    };
+
+2) lp8556 platform data: pwm input mode with default rom data::
+
+    static struct lp855x_platform_data lp8556_pdata = {
+	.device_control = PWM_CONFIG(LP8556),
+	.initial_brightness = INITIAL_BRT,
+	.period_ns = 1000000,
+    };