Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 150 insertions, 0 deletions

diff --git a/Documentation/devicetree/overlay-notes.rst b/Documentation/devicetree/overlay-notes.rst
new file mode 100644
index 000000000..ba401ef85
--- /dev/null
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -0,0 +1,150 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Devicetree Overlay Notes
+========================
+
+This document describes the implementation of the in-kernel
+device tree overlay functionality residing in drivers/of/overlay.c and is a
+companion document to Documentation/devicetree/dynamic-resolution-notes.rst[1]
+
+How overlays work
+-----------------
+
+A Devicetree's overlay purpose is to modify the kernel's live tree, and
+have the modification affecting the state of the kernel in a way that
+is reflecting the changes.
+Since the kernel mainly deals with devices, any new device node that results
+in an active device should have it created while if the device node is either
+disabled or removed all together, the affected device should be deregistered.
+
+Let's take an example where we have a foo board with the following base tree::
+
+    ---- foo.dts ---------------------------------------------------------------
+	/* FOO platform */
+	/dts-v1/;
+	/ {
+		compatible = "corp,foo";
+
+		/* shared resources */
+		res: res {
+		};
+
+		/* On chip peripherals */
+		ocp: ocp {
+			/* peripherals that are always instantiated */
+			peripheral1 { ... };
+		};
+	};
+    ---- foo.dts ---------------------------------------------------------------
+
+The overlay bar.dtso,
+::
+
+    ---- bar.dtso - overlay target location by label ---------------------------
+	/dts-v1/;
+	/plugin/;
+	&ocp {
+		/* bar peripheral */
+		bar {
+			compatible = "corp,bar";
+			... /* various properties and child nodes */
+		};
+	};
+    ---- bar.dtso --------------------------------------------------------------
+
+when loaded (and resolved as described in [1]) should result in foo+bar.dts::
+
+    ---- foo+bar.dts -----------------------------------------------------------
+	/* FOO platform + bar peripheral */
+	/ {
+		compatible = "corp,foo";
+
+		/* shared resources */
+		res: res {
+		};
+
+		/* On chip peripherals */
+		ocp: ocp {
+			/* peripherals that are always instantiated */
+			peripheral1 { ... };
+
+			/* bar peripheral */
+			bar {
+				compatible = "corp,bar";
+				... /* various properties and child nodes */
+			};
+		};
+	};
+    ---- foo+bar.dts -----------------------------------------------------------
+
+As a result of the overlay, a new device node (bar) has been created
+so a bar platform device will be registered and if a matching device driver
+is loaded the device will be created as expected.
+
+If the base DT was not compiled with the -@ option then the "&ocp" label
+will not be available to resolve the overlay node(s) to the proper location
+in the base DT. In this case, the target path can be provided. The target
+location by label syntax is preferred because the overlay can be applied to
+any base DT containing the label, no matter where the label occurs in the DT.
+
+The above bar.dtso example modified to use target path syntax is::
+
+    ---- bar.dtso - overlay target location by explicit path -------------------
+	/dts-v1/;
+	/plugin/;
+	&{/ocp} {
+		/* bar peripheral */
+		bar {
+			compatible = "corp,bar";
+			... /* various properties and child nodes */
+		}
+	};
+    ---- bar.dtso --------------------------------------------------------------
+
+
+Overlay in-kernel API
+--------------------------------
+
+The API is quite easy to use.
+
+1) Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
+   return value is an error or a cookie identifying this overlay.
+
+2) Call of_overlay_remove() to remove and clean up the overlay changeset
+   previously created via the call to of_overlay_fdt_apply(). Removal of an
+   overlay changeset that is stacked by another will not be permitted.
+
+Finally, if you need to remove all overlays in one-go, just call
+of_overlay_remove_all() which will remove every single one in the correct
+order.
+
+There is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or
+OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay
+or its content but these pointers must not persist past the notifier callback
+for OF_OVERLAY_POST_REMOVE.  The memory containing the overlay will be
+kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called.  Note that the
+memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE
+returns an error.
+
+The changeset notifiers in drivers/of/dynamic.c are a second type of notifier
+that could be triggered by applying or removing an overlay.  These notifiers
+are not allowed to store pointers to a device tree node in the overlay
+or its content.  The overlay code does not protect against such pointers
+remaining active when the memory containing the overlay is freed as a result
+of removing the overlay.
+
+Any other code that retains a pointer to the overlay nodes or data is
+considered to be a bug because after removing the overlay the pointer
+will refer to freed memory.
+
+Users of overlays must be especially aware of the overall operations that
+occur on the system to ensure that other kernel code does not retain any
+pointers to the overlay nodes or data.  Any example of an inadvertent use
+of such pointers is if a driver or subsystem module is loaded after an
+overlay has been applied, and the driver or subsystem scans the entire
+devicetree or a large portion of it, including the overlay nodes.