Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

3 files changed, 207 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/virtio/mmio.yaml b/Documentation/devicetree/bindings/virtio/mmio.yaml
new file mode 100644
index 000000000..0aa8433f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/mmio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: virtio memory mapped devices
+
+maintainers:
+  - Jean-Philippe Brucker <jean-philippe@linaro.org>
+
+description:
+  See https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=virtio for
+  more details.
+
+properties:
+  compatible:
+    const: virtio,mmio
+
+  reg:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  '#iommu-cells':
+    description: Required when the node corresponds to a virtio-iommu device.
+    const: 1
+
+  iommus:
+    description: Required for devices making accesses thru an IOMMU.
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: Required for setting irq of a virtio_mmio device as wakeup source.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        /* Device has endpoint ID 23 */
+        iommus = <&viommu 23>;
+    };
+
+    viommu: iommu@3100 {
+        compatible = "virtio,mmio";
+        reg = <0x3100 0x100>;
+        interrupts = <42>;
+
+        #iommu-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/virtio/pci-iommu.yaml b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
new file mode 100644
index 000000000..8bd6ad72a
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/pci-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: virtio-iommu device using the virtio-pci transport
+
+maintainers:
+  - Jean-Philippe Brucker <jean-philippe@linaro.org>
+
+description: |
+  When virtio-iommu uses the PCI transport, its programming interface is
+  discovered dynamically by the PCI probing infrastructure. However the
+  device tree statically describes the relation between IOMMU and DMA
+  masters. Therefore, the PCI root complex that hosts the virtio-iommu
+  contains a child node representing the IOMMU device explicitly.
+
+  DMA from the IOMMU device isn't managed by another IOMMU. Therefore the
+  virtio-iommu node doesn't have an "iommus" property, and is omitted from
+  the iommu-map property of the root complex.
+
+allOf:
+  - $ref: /schemas/pci/pci-device.yaml#
+
+properties:
+  # If compatible is present, it should contain the vendor and device ID
+  # according to the PCI Bus Binding specification. Since PCI provides
+  # built-in identification methods, compatible is not actually required.
+  compatible:
+    oneOf:
+      - items:
+          - const: virtio,pci-iommu
+          - const: pci1af4,1057
+      - items:
+          - const: pci1af4,1057
+
+  reg:
+    maxItems: 1
+
+  '#iommu-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@40000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x40000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU manages all functions in this PCI domain except
+             * itself. Omit BDF 00:01.0.
+             */
+            iommu-map = <0x0 &iommu0 0x0 0x8
+                         0x9 &iommu0 0x9 0xfff7>;
+
+            /* The IOMMU programming interface uses slot 00:01.0 */
+            iommu0: iommu@1,0 {
+                compatible = "pci1af4,1057";
+                reg = <0x800 0 0 0 0>;
+                #iommu-cells = <1>;
+            };
+        };
+
+        pcie@50000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x50000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x51000000  0x0 0x51000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU also manages all functions from this domain,
+             * with endpoint IDs 0x10000 - 0x1ffff
+             */
+            iommu-map = <0x0 &iommu0 0x10000 0x10000>;
+        };
+
+        ethernet {
+            /* The IOMMU manages this platform device with endpoint ID 0x20000 */
+            iommus = <&iommu0 0x20000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/virtio/virtio-device.yaml b/Documentation/devicetree/bindings/virtio/virtio-device.yaml
new file mode 100644
index 000000000..8c6919ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/virtio-device.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/virtio-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio device
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description:
+  These bindings are applicable to virtio devices irrespective of the bus they
+  are bound to, like mmio or pci.
+
+# We need a select here so we don't match all nodes with 'virtio,mmio'
+properties:
+  compatible:
+    pattern: "^virtio,device[0-9a-f]{1,8}$"
+    description: Virtio device nodes.
+      "virtio,deviceID", where ID is the virtio device id. The textual
+      representation of ID shall be in lower case hexadecimal with leading
+      zeroes suppressed.
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <43>;
+
+        i2c {
+            compatible = "virtio,device22";
+        };
+    };
+...