staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 222 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
new file mode 100644
index 000000000..95f42acd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hardware-timestamps-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware timestamp providers
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Some devices/SoCs have hardware timestamp engines (HTE) which can use
+  hardware means to timestamp entity in realtime. The entity could be anything
+  from GPIOs, IRQs, Bus and so on. The hardware timestamp engine present
+  itself as a provider with the bindings described in this document.
+
+properties:
+  $nodename:
+    pattern: "^timestamp(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  "#timestamp-cells":
+    description:
+      Number of cells in a HTE specifier.
+
+required:
+  - "#timestamp-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
new file mode 100644
index 000000000..5142d6d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hte-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HTE Consumer
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+select: true
+
+properties:
+  timestamps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The list of HTE provider phandle. The first cell must represent the
+      provider phandle followed by the line identifiers. The meaning of the
+      line identifier and exact number of arguments must be specified in the
+      HTE provider device tree binding document.
+
+  timestamp-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      An optional string property to label each line specifier present in the
+      timestamp property.
+
+dependencies:
+  timestamp-names: [ timestamps ]
+
+additionalProperties: true
+
+examples:
+  - |
+    hte_tegra_consumer {
+              timestamps = <&tegra_hte_aon 0x9>, <&tegra_hte_lic 0x19>;
+              timestamp-names = "hte-gpio", "hte-i2c";
+    };
diff --git a/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
new file mode 100644
index 000000000..a96d6cd23
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/nvidia,tegra194-hte.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra on chip generic hardware timestamping engine (HTE) provider
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Tegra SoC has two instances of generic hardware timestamping engines (GTE)
+  known as GTE GPIO and GTE IRQ, which can monitor subset of GPIO and on chip
+  IRQ lines for the state change respectively, upon detection it will record
+  timestamp (taken from system counter) in its internal hardware FIFO. It has
+  a bitmap array arranged in 32bit slices where each bit represent signal/line
+  to enable or disable for the hardware timestamping. The GTE GPIO monitors
+  GPIO lines from the AON (always on) GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-gte-aon
+      - nvidia,tegra194-gte-lic
+      - nvidia,tegra234-gte-aon
+      - nvidia,tegra234-gte-lic
+      - nvidia,tegra264-gte-aon
+      - nvidia,tegra264-gte-lic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nvidia,int-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HTE device generates its interrupt based on this u32 FIFO threshold
+      value. The recommended value is 1.
+    minimum: 1
+    maximum: 256
+
+  nvidia,slices:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      HTE lines are arranged in 32 bit slice where each bit represents different
+      line/signal that it can enable/configure for the timestamp. It is u32
+      property and the value depends on the HTE instance in the chip. The AON
+      GTE instances for both Tegra194 and Tegra234 has 3 slices. The Tegra194
+      LIC instance has 11 slices and Tegra234 LIC has 17 slices.
+    enum: [3, 11, 17]
+
+  nvidia,gpio-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to AON gpio controller instance. This is required to handle
+      namespace conversion between GPIO and GTE.
+
+  '#timestamp-cells':
+    description:
+      This represents number of line id arguments as specified by the
+      consumers. For the GTE IRQ, this is IRQ number as mentioned in the
+      SoC technical reference manual. For the GTE GPIO, its value is same as
+      mentioned in the nvidia GPIO device tree binding document.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#timestamp-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-gte-aon
+              - nvidia,tegra234-gte-aon
+    then:
+      properties:
+        nvidia,slices:
+          const: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-gte-lic
+    then:
+      properties:
+        nvidia,slices:
+          const: 11
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-gte-lic
+    then:
+      properties:
+        nvidia,slices:
+          const: 17
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-gte-aon
+              - nvidia,tegra264-gte-aon
+    then:
+      required:
+        - nvidia,gpio-controller
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra264-gte-aon
+              - nvidia,tegra264-gte-lic
+    then:
+      properties:
+        nvidia,slices: false
+
+additionalProperties: false
+
+examples:
+  - |
+    tegra_hte_aon: timestamp@c1e0000 {
+              compatible = "nvidia,tegra194-gte-aon";
+              reg = <0xc1e0000 0x10000>;
+              interrupts = <0 13 0x4>;
+              nvidia,int-threshold = <1>;
+              #timestamp-cells = <1>;
+    };
+
+  - |
+    tegra_hte_lic: timestamp@3aa0000 {
+              compatible = "nvidia,tegra194-gte-lic";
+              reg = <0x3aa0000 0x10000>;
+              interrupts = <0 11 0x4>;
+              nvidia,int-threshold = <1>;
+              #timestamp-cells = <1>;
+    };
+
+...