ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted

make htmldocs fails with:

  Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
  ERROR: Unexpected indentation. [docutils]

The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.

Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.

Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.

Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>

2 files changed, 216 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml
new file mode 100644
index 000000000..27a92b79c
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMBus NGD controller is a light-weight driver responsible for communicating
+  with SLIMBus slaves directly over the bus using messaging interface and
+  communicating with master component residing on ADSP for bandwidth and
+  data-channel management
+
+properties:
+  compatible:
+    enum:
+      - qcom,slim-ngd-v1.5.0        # for MSM8996
+      - qcom,slim-ngd-v2.1.0        # for SDM845
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^slim@[0-9a-f]+$":
+    type: object
+    $ref: slimbus.yaml#
+    description:
+      Each subnode represents an instance of NGD
+
+    properties:
+      reg:
+        maxItems: 1
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - dmas
+  - dma-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    slim-ngd@171c0000 {
+        compatible = "qcom,slim-ngd-v2.1.0";
+        reg = <0x171c0000 0x2c000>;
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+
+        dmas = <&slimbam 3>, <&slimbam 4>;
+        dma-names = "rx", "tx";
+        iommus = <&apps_smmu 0x1806 0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        slim@1 {
+            reg = <1>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            codec@1,0 {
+                compatible = "slim217,250";
+                reg = <1 0>;
+                slim-ifc-dev = <&wcd9340_ifd>;
+
+                #sound-dai-cells = <1>;
+
+                interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-controller;
+                #interrupt-cells = <1>;
+
+                #clock-cells = <0>;
+                clock-frequency = <9600000>;
+                clock-output-names = "mclk";
+                qcom,micbias1-microvolt = <1800000>;
+                qcom,micbias2-microvolt = <1800000>;
+                qcom,micbias3-microvolt = <1800000>;
+                qcom,micbias4-microvolt = <1800000>;
+
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+
+                /* Rest of the WCD9340 codec */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
new file mode 100644
index 000000000..3910327c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/slimbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SLIM (Serial Low Power Interchip Media) bus
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMbus is a 2-wire bus, and is used to communicate with peripheral
+  components like audio-codec.
+
+properties:
+  $nodename:
+    pattern: "^slim(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f]+,[0-9a-f]+$":
+    type: object
+    description: |
+      Every SLIMbus controller node can contain zero or more child nodes
+      representing slave devices on the bus. Every SLIMbus slave device is
+      uniquely determined by the enumeration address containing 4 fields:
+      Manufacturer ID, Product code, Device index, and Instance value for the
+      device.
+
+      If child node is not present and it is instantiated after device
+      discovery (slave device reporting itself present).
+
+      In some cases it may be necessary to describe non-probeable device
+      details such as non-standard ways of powering up a device. In such cases,
+      child nodes for those devices will be present as slaves of the SLIMbus
+      controller.
+
+    properties:
+      compatible:
+        pattern: "^slim[0-9a-f]+,[0-9a-f]+$"
+
+      reg:
+        maxItems: 1
+        description: |
+          Pair of (device index, instande ID), where:
+           - Device index, which uniquely identifies multiple devices within a
+             single component.
+           - Instance ID, can be used for the cases where multiple devices of
+             the same type or class are attached to the bus.
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: true
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        controller@28080000 {
+            compatible = "qcom,slim-ngd-v1.5.0";
+            reg = <0x091c0000 0x2c000>;
+            interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+            dmas = <&slimbam 3>, <&slimbam 4>;
+            dma-names = "rx", "tx";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            slim@1 {
+              reg = <1>;
+              #address-cells = <2>;
+              #size-cells = <0>;
+              codec@1,0 {
+                compatible = "slim217,1a0";
+                reg = <1 0>;
+              };
+            };
+          };
+        };