usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stopgrafted

cc_debounce_dwork is queued from the set_cc() and start_toggling()
callbacks, which run from TCPM's kthread worker.  port_stop() returns
before tcpm_unregister_port() destroys that worker.  Flushing the worker
during unregister may therefore run a callback which queues the delayed
work after port_stop() has returned.

The delayed work can then run after devres has freed pmic_typec_port.

Use disable_delayed_work_sync() in port_stop() to cancel a pending
instance and prevent the TCPM callbacks from queueing another one.

This issue was found by an in-house static analysis tool.

Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org>  # v6.10+
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260820135307.153773-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 48 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml
new file mode 100644
index 000000000..2ff204109
--- /dev/null
+++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/siox/eckelmann,siox-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eckelmann SIOX GPIO bus
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: eckelmann,siox-gpio
+
+  din-gpios:
+    maxItems: 1
+
+  dout-gpios:
+    maxItems: 1
+
+  dclk-gpios:
+    maxItems: 1
+
+  dld-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - din-gpios
+  - dout-gpios
+  - dclk-gpios
+  - dld-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    siox {
+        compatible = "eckelmann,siox-gpio";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_siox>;
+
+        din-gpios = <&gpio6 11 0>;
+        dout-gpios = <&gpio6 8 0>;
+        dclk-gpios = <&gpio6 9 0>;
+        dld-gpios = <&gpio6 10 0>;
+    };