Merge tag 'rust-i2c-for-7.3' into i2c/i2cgrafted

i2c: rust: mark I2cAdapter methods as inline

A single cleanup for the Rust I2C abstractions, targeting 7.3.

`I2cAdapter::get`, `inc_ref`, and `dec_ref` are trivial wrappers around
`i2c_get_adapter`/`i2c_put_adapter` and were showing up as their own
symbols in the build. Mark them `#[inline]` so they get folded into
their callers instead.

Signed-off-by: Igor Korotin <igor.korotin@linux.dev>

* tag 'rust-i2c-for-7.3':
  i2c: rust: mark I2cAdapter methods as inline

1 files changed, 29 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
new file mode 100644
index 000000000..873096be0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -0,0 +1,29 @@
+Devicetree binding for regmap
+
+Optional properties:
+
+   little-endian,
+   big-endian,
+   native-endian:	See common-properties.txt for a definition
+
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
+
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianness
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
+
+Examples:
+Scenario 1 : a register set in big-endian mode.
+dev: dev@40031000 {
+	      compatible = "syscon";
+	      reg = <0x40031000 0x1000>;
+	      big-endian;
+	      ...
+};