thunderbolt: Fix NULL dereference in tb_remove_work()grafted

There is a slight race between tb_remove_work() and tb_domain_remove()
which leads to dereferencing a NULL tb->root_switch pointer inside
tb_free_unplugged_xdomains():

        Thread A                            Thread B

  tb_remove_work()
                                    tb_domain_remove()
                                      mutex_lock(&tb->lock)
                                      tb_stop()
                                        /* doesn't cancel a running callback */
                                        cancel_delayed_work(&tcm->remove_work)
                                        ...
                                        tb_switch_remove(tb->root_switch)
                                        tb->root_switch = NULL
                                      mutex_unlock(&tb->lock)
    mutex_lock(&tb->lock)
    ...
    /* without checking ->root_switch */
    tb_free_unplugged_xdomains(tb->root_switch)
    mutex_unlock(&tb->lock)

Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without
holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains()
out of the &tb->lock section and the check for tb->root_switch, in
particular.  It states:

  For this reason separate removing the XDomain from the topology data
  structures (where we need the lock) from unregistering the device from
  the bus (where remove callbacks of the drivers are being called).

tb_free_unplugged_xdomains() belongs to the former group of functions
requiring the lock.  And it also calls tb_xdomain_remove() which should
only be called with &tb->lock held.

Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.

Fixes: a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

1 files changed, 29 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
new file mode 100644
index 000000000..873096be0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -0,0 +1,29 @@
+Devicetree binding for regmap
+
+Optional properties:
+
+   little-endian,
+   big-endian,
+   native-endian:	See common-properties.txt for a definition
+
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
+
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianness
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
+
+Examples:
+Scenario 1 : a register set in big-endian mode.
+dev: dev@40031000 {
+	      compatible = "syscon";
+	      reg = <0x40031000 0x1000>;
+	      big-endian;
+	      ...
+};