Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

8 files changed, 475 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/ptp/amazon,vmclock.yaml b/Documentation/devicetree/bindings/ptp/amazon,vmclock.yaml
new file mode 100644
index 000000000..357790df8
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/amazon,vmclock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/amazon,vmclock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtual Machine Clock
+
+maintainers:
+  - David Woodhouse <dwmw2@infradead.org>
+
+description:
+  The vmclock device provides a precise clock source and allows for
+  accurate timekeeping across live migration and snapshot/restore
+  operations. The full specification of the shared data structure is
+  available at https://uapi-group.org/specifications/specs/vmclock/
+
+properties:
+  compatible:
+    const: amazon,vmclock
+
+  reg:
+    description:
+      Specifies the shared memory region containing the vmclock_abi structure.
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt used to notify when the contents of the vmclock_abi structure
+      have been updated.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ptp@80000000 {
+      compatible = "amazon,vmclock";
+      reg = <0x80000000 0x1000>;
+      interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
new file mode 100644
index 000000000..6b1075ee8
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
@@ -0,0 +1,19 @@
+* Broadcom Digital Timing Engine(DTE) based PTP clock
+
+Required properties:
+- compatible: should contain the core compatibility string
+              and the SoC compatibility string. The SoC
+              compatibility string is to handle SoC specific
+              hardware differences.
+              Core compatibility string:
+                 "brcm,ptp-dte"
+              SoC compatibility strings:
+                 "brcm,iproc-ptp-dte" - for iproc based SoC's
+- reg: address and length of the DTE block's NCO registers
+
+Example:
+
+ptp: ptp-dte@180af650 {
+	compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
+	reg = <0x180af650 0x10>;
+};
diff --git a/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml b/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml
new file mode 100644
index 000000000..998f2ce86
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/fsl,ptp.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/fsl,ptp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QorIQ 1588 timer based PTP clock
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,etsec-ptp
+          - fsl,fman-ptp-timer
+          - fsl,dpaa2-ptp
+      - items:
+          - const: pci1957,ee02
+          - const: fsl,enetc-ptp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  fsl,cksel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Timer reference clock source.
+
+      Reference clock source is determined by the value, which is holded
+      in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+      value, which will be directly written in those bits, that is why,
+      according to reference manual, the next clock sources can be used:
+
+      For eTSEC,
+      <0> - external high precision timer reference clock (TSEC_TMR_CLK
+            input is used for this purpose);
+      <1> - eTSEC system clock;
+      <2> - eTSEC1 transmit clock;
+      <3> - RTC clock input.
+
+      For DPAA FMan,
+      <0> - external high precision timer reference clock (TMR_1588_CLK)
+      <1> - MAC system clock (1/2 FMan clock)
+      <2> - reserved
+      <3> - RTC clock oscillator
+
+  fsl,tclk-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Timer reference clock period in nanoseconds.
+
+  fsl,tmr-prsc:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Prescaler, divides the output clock.
+
+  fsl,tmr-add:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency compensation value.
+
+  fsl,tmr-fiper1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Fixed interval period pulse generator.
+      Supported only on DPAA2 and ENETC hardware.
+
+  fsl,max-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum frequency adjustment in parts per billion.
+
+      These properties set the operational parameters for the PTP
+      clock. You must choose these carefully for the clock to work right.
+      Here is how to figure good values:
+
+      TimerOsc     = selected reference clock   MHz
+      tclk_period  = desired clock period       nanoseconds
+      NominalFreq  = 1000 / tclk_period         MHz
+      FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
+      tmr_add      = ceil(2^32 / FreqDivRatio)
+      OutputClock  = NominalFreq / tmr_prsc     MHz
+      PulseWidth   = 1 / OutputClock            microseconds
+      FiperFreq1   = desired frequency in Hz
+      FiperDiv1    = 1000000 * OutputClock / FiperFreq1
+      tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+      max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+      The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+      driver expects that tmr_fiper1 will be correctly set to produce a 1
+      Pulse Per Second (PPS) signal, since this will be offered to the PPS
+      subsystem to synchronize the Linux clock.
+
+      When this attribute is not used, the IEEE 1588 timer reference clock
+      will use the eTSEC system clock (for Gianfar) or the MAC system
+      clock (for DPAA).
+
+  fsl,extts-fifo:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates hardware
+      support for the external trigger stamp FIFO
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates the 1588 timer
+      support for the external trigger stamp FIFO.
+      IP block is little-endian mode. The default endian mode
+      is big-endian.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,enetc-ptp
+    then:
+      $ref: /schemas/pci/pci-device.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    phc@24e00 {
+        compatible = "fsl,etsec-ptp";
+        reg = <0x24e00 0xb0>;
+        interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-parent = <&ipic>;
+        fsl,cksel = <1>;
+        fsl,tclk-period = <10>;
+        fsl,tmr-prsc = <100>;
+        fsl,tmr-add = <0x999999a4>;
+        fsl,tmr-fiper1 = <0x3b9ac9f6>;
+        fsl,tmr-fiper2 = <0x00018696>;
+        fsl,max-adj = <659999998>;
+    };
diff --git a/Documentation/devicetree/bindings/ptp/nxp,ptp-netc.yaml b/Documentation/devicetree/bindings/ptp/nxp,ptp-netc.yaml
new file mode 100644
index 000000000..042de9d5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/nxp,ptp-netc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/nxp,ptp-netc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP NETC V4 Timer PTP clock
+
+description:
+  NETC V4 Timer provides current time with nanosecond resolution, precise
+  periodic pulse, pulse on timeout (alarm), and time capture on external
+  pulse support. And it supports time synchronization as required for
+  IEEE 1588 and IEEE 802.1AS-2020.
+
+maintainers:
+  - Wei Fang <wei.fang@nxp.com>
+  - Clark Wang <xiaoning.wang@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - pci1131,ee02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      The reference clock of NETC Timer, can be selected between 3 different
+      clock sources using an integrated hardware mux TMR_CTRL[CK_SEL].
+      The "ccm" means the reference clock comes from CCM of SoC.
+      The "ext" means the reference clock comes from external IO pins.
+      If not present, indicates that the system clock of NETC IP is selected
+      as the reference clock.
+
+  clock-names:
+    enum:
+      - ccm
+      - ext
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/pci/pci-device.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie {
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        ptp-timer@18,0 {
+            compatible = "pci1131,ee02";
+            reg = <0x00c000 0 0 0 0>;
+            clocks = <&scmi_clk 18>;
+            clock-names = "ccm";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
new file mode 100644
index 000000000..51381e4cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-idt82p33.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 82P33 PTP Clock
+
+description: |
+  IDT 82P33XXX Synchronization Management Unit (SMU) based PTP clock
+
+maintainers:
+  - Min Li <min.li.xe@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - idt,82p33810
+      - idt,82p33813
+      - idt,82p33814
+      - idt,82p33831
+      - idt,82p33910
+      - idt,82p33913
+      - idt,82p33914
+      - idt,82p33931
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phc@51 {
+            compatible = "idt,82p33810";
+            reg = <0x51>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
new file mode 100644
index 000000000..7cf32663c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-idtcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT ClockMatrix (TM) PTP Clock
+
+maintainers:
+  - Vincent Cheng <vincent.cheng.xh@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      # For System Synchronizer
+      - idt,8a34000
+      - idt,8a34001
+      - idt,8a34002
+      - idt,8a34003
+      - idt,8a34004
+      - idt,8a34005
+      - idt,8a34006
+      - idt,8a34007
+      - idt,8a34008
+      - idt,8a34009
+      # For Port Synchronizer
+      - idt,8a34010
+      - idt,8a34011
+      - idt,8a34012
+      - idt,8a34013
+      - idt,8a34014
+      - idt,8a34015
+      - idt,8a34016
+      - idt,8a34017
+      - idt,8a34018
+      - idt,8a34019
+      # For Universal Frequency Translator (UFT)
+      - idt,8a34040
+      - idt,8a34041
+      - idt,8a34042
+      - idt,8a34043
+      - idt,8a34044
+      - idt,8a34045
+      - idt,8a34046
+      - idt,8a34047
+      - idt,8a34048
+      - idt,8a34049
+
+  reg:
+    maxItems: 1
+    description:
+      I2C slave address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phc@5b {
+            compatible = "idt,8a34000";
+            reg = <0x5b>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ptp/ptp-ines.txt b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
new file mode 100644
index 000000000..4c242bd1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
@@ -0,0 +1,35 @@
+ZHAW InES PTP time stamping IP core
+
+The IP core needs two different kinds of nodes.  The control node
+lives somewhere in the memory map and specifies the address of the
+control registers.  There can be up to three port handles placed as
+attributes of PHY nodes.  These associate a particular MII bus with a
+port index within the IP core.
+
+Required properties of the control node:
+
+- compatible:		"ines,ptp-ctrl"
+- reg:			physical address and size of the register bank
+
+Required format of the port handle within the PHY node:
+
+- timestamper:		provides control node reference and
+			the port channel within the IP core
+
+Example:
+
+	tstamper: timestamper@60000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x60000000 0x80>;
+	};
+
+	ethernet@80000000 {
+		...
+		mdio {
+			...
+			ethernet-phy@3 {
+				...
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/ptp/timestamper.txt b/Documentation/devicetree/bindings/ptp/timestamper.txt
new file mode 100644
index 000000000..fc550ce4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/timestamper.txt
@@ -0,0 +1,42 @@
+Time stamps from MII bus snooping devices
+
+This binding supports non-PHY devices that snoop the MII bus and
+provide time stamps.  In contrast to PHY time stamping drivers (which
+can simply attach their interface directly to the PHY instance), stand
+alone MII time stamping drivers use this binding to specify the
+connection between the snooping device and a given network interface.
+
+Non-PHY MII time stamping drivers typically talk to the control
+interface over another bus like I2C, SPI, UART, or via a memory mapped
+peripheral.  This controller device is associated with one or more
+time stamping channels, each of which snoops on a MII bus.
+
+The "timestamper" property lives in a phy node and links a time
+stamping channel from the controller device to that phy's MII bus.
+
+Example:
+
+	tstamper: timestamper@10000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x10000000 0x80>;
+	};
+
+	ethernet@20000000 {
+		mdio {
+			ethernet-phy@1 {
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
+
+	ethernet@30000000 {
+		mdio {
+			ethernet-phy@2 {
+				timestamper = <&tstamper 1>;
+			};
+		};
+	};
+
+In this example, time stamps from the MII bus attached to phy@1 will
+appear on time stamp channel 0 (zero), and those from phy@2 appear on
+channel 1.