ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted

make htmldocs fails with:

  Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
  ERROR: Unexpected indentation. [docutils]

The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.

Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.

Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.

Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>

1 files changed, 39 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
new file mode 100644
index 000000000..4950c794e
--- /dev/null
+++ b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
@@ -0,0 +1,39 @@
+OpenRISC Generic SoC
+====================
+
+Boards and FPGA SoC's which support the OpenRISC standard platform.  The
+platform essentially follows the conventions of the OpenRISC architecture
+specification, however some aspects, such as the boot protocol have been defined
+by the Linux port.
+
+Required properties
+-------------------
+ - compatible: Must include "opencores,or1ksim"
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0.  Since the topology may
+be probed via CPS, it is not necessary to specify secondary CPUs.  Required
+properties:
+ - compatible: Must be "opencores,or1200-rtlsvn481".
+ - reg: CPU number.
+ - clock-frequency: The CPU clock frequency in Hz.
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
+
+Boot protocol
+-------------
+The bootloader may pass the following arguments to the kernel:
+ - r3:  address of a flattened device-tree blob or 0x0.