thunderbolt: Fix NULL dereference in tb_remove_work()grafted

There is a slight race between tb_remove_work() and tb_domain_remove()
which leads to dereferencing a NULL tb->root_switch pointer inside
tb_free_unplugged_xdomains():

        Thread A                            Thread B

  tb_remove_work()
                                    tb_domain_remove()
                                      mutex_lock(&tb->lock)
                                      tb_stop()
                                        /* doesn't cancel a running callback */
                                        cancel_delayed_work(&tcm->remove_work)
                                        ...
                                        tb_switch_remove(tb->root_switch)
                                        tb->root_switch = NULL
                                      mutex_unlock(&tb->lock)
    mutex_lock(&tb->lock)
    ...
    /* without checking ->root_switch */
    tb_free_unplugged_xdomains(tb->root_switch)
    mutex_unlock(&tb->lock)

Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without
holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains()
out of the &tb->lock section and the check for tb->root_switch, in
particular.  It states:

  For this reason separate removing the XDomain from the topology data
  structures (where we need the lock) from unregistering the device from
  the bus (where remove callbacks of the drivers are being called).

tb_free_unplugged_xdomains() belongs to the former group of functions
requiring the lock.  And it also calls tb_xdomain_remove() which should
only be called with &tb->lock held.

Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.

Fixes: a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

1 files changed, 39 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
new file mode 100644
index 000000000..4950c794e
--- /dev/null
+++ b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
@@ -0,0 +1,39 @@
+OpenRISC Generic SoC
+====================
+
+Boards and FPGA SoC's which support the OpenRISC standard platform.  The
+platform essentially follows the conventions of the OpenRISC architecture
+specification, however some aspects, such as the boot protocol have been defined
+by the Linux port.
+
+Required properties
+-------------------
+ - compatible: Must include "opencores,or1ksim"
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0.  Since the topology may
+be probed via CPS, it is not necessary to specify secondary CPUs.  Required
+properties:
+ - compatible: Must be "opencores,or1200-rtlsvn481".
+ - reg: CPU number.
+ - clock-frequency: The CPU clock frequency in Hz.
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
+
+Boot protocol
+-------------
+The bootloader may pass the following arguments to the kernel:
+ - r3:  address of a flattened device-tree blob or 0x0.