diff options
| author | Salah Triki <salah.triki@gmail.com> | 2026-09-17 14:00:52 +0100 |
|---|---|---|
| committer | Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> | 2026-09-30 18:59:55 +0100 |
| commit | e8dd273d199f5bbe295a8e3d8b777c5505b6b2e1 (patch) | |
| tree | 767c7e109d3e6b9ec6549e99dfec9085d01318ad /Documentation/devicetree/bindings/input | |
| download | linux-stable-e8dd273d199f5bbe295a8e3d8b777c5505b6b2e1.tar.gz linux-stable-e8dd273d199f5bbe295a8e3d8b777c5505b6b2e1.zip | |
iio: proximity: isl29501: Fix return type of isl29501_register_writegrafted
isl29501_register_write() was returning a u32 instead of an int.
Since the function returns negative error codes (such as -ERANGE or
return values from i2c_smbus_write_byte_data()), returning an unsigned
integer type prevents callers from correctly checking for negative error
conditions.
Fix this by changing the function return type from u32 to int.
This was found through manual code review.
Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Diffstat (limited to 'Documentation/devicetree/bindings/input')
135 files changed, 13862 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml new file mode 100644 index 000000000..5e86f6de6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Adafruit Mini I2C Gamepad with seesaw + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +description: | + Adafruit Mini I2C Gamepad + + +-----------------------------+ + | ___ | + | / \ (X) | + | | S | __ __ (Y) (A) | + | \___/ |ST| |SE| (B) | + | | + +-----------------------------+ + + S -> 10-bit precision bidirectional analog joystick + ST -> Start + SE -> Select + X, A, B, Y -> Digital action buttons + + Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf + Product page: https://www.adafruit.com/product/5743 + Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw + +properties: + compatible: + const: adafruit,seesaw-gamepad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: + The gamepad's IRQ pin triggers a rising edge if interrupts are enabled. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + joystick@50 { + compatible = "adafruit,seesaw-gamepad"; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; + reg = <0x50>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml new file mode 100644 index 000000000..6c244d66f --- /dev/null +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019-2020 Artur Rojek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/adc-joystick.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC attached joystick + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + +description: > + Bindings for joystick devices connected to ADC controllers supporting + the Industrial I/O subsystem. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: adc-joystick + + io-channels: + minItems: 1 + maxItems: 1024 + description: > + List of phandle and IIO specifier pairs. + Each pair defines one ADC channel to which a joystick axis is connected. + See + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml + for details. + + poll-interval: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - io-channels + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +patternProperties: + "^axis@[0-9a-f]+$": + type: object + $ref: input.yaml# + description: > + Represents a joystick axis bound to the given ADC channel. + For each entry in the io-channels list, one axis subnode with a matching + reg property must be specified. + + properties: + reg: + minimum: 0 + maximum: 1023 + description: Index of an io-channels list entry bound to this axis. + + linux,code: + description: EV_ABS specific event code generated by the axis. + + abs-range: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: minimum value + - description: maximum value + description: > + Minimum and maximum values produced by the axis. + For an ABS_X axis this will be the left-most and right-most + inclination of the joystick. If min > max, it is left to userspace to + treat the axis as inverted. + This property is interpreted as two signed 32 bit values. + + abs-fuzz: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Amount of noise in the input value. + Omitting this property indicates the axis is precise. + + abs-flat: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Axial "deadzone", or area around the center position, where the axis + is considered to be at rest. + Omitting this property indicates the axis always returns to exactly + the center position. + + required: + - reg + - linux,code + - abs-range + + additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/ingenic,adc.h> + #include <dt-bindings/input/input.h> + + joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc INGENIC_ADC_TOUCH_XP>, + <&adc INGENIC_ADC_TOUCH_YP>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + linux,code = <ABS_X>; + abs-range = <3300 0>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + axis@1 { + reg = <1>; + linux,code = <ABS_Y>; + abs-range = <0 3300>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/adc-keys.yaml b/Documentation/devicetree/bindings/input/adc-keys.yaml new file mode 100644 index 000000000..7aa078dea --- /dev/null +++ b/Documentation/devicetree/bindings/input/adc-keys.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/adc-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC attached resistor ladder buttons + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: adc-keys + + io-channels: + maxItems: 1 + + io-channel-names: + const: buttons + + keyup-threshold-microvolt: + description: + Voltage above or equal to which all the keys are considered up. + + poll-interval: true + autorepeat: true + +patternProperties: + '^button-': + type: object + $ref: input.yaml# + additionalProperties: false + description: + Each button (key) is represented as a sub-node. + + properties: + label: true + + linux,code: true + + press-threshold-microvolt: + description: + Voltage above or equal to which this key is considered pressed. No + two values of press-threshold-microvolt may be the same. All values + of press-threshold-microvolt must be less than + keyup-threshold-microvolt. + + required: + - linux,code + - press-threshold-microvolt + +required: + - compatible + - io-channels + - io-channel-names + - keyup-threshold-microvolt + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + // +--------------------------------+------------------------+ + // | 2.000.000 <= value | no key pressed | + // +--------------------------------+------------------------+ + // | 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed | + // +--------------------------------+------------------------+ + // | 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed | + // +--------------------------------+------------------------+ + // | 500.000 <= value < 1.000.000 | KEY_ENTER pressed | + // +--------------------------------+------------------------+ + // | value < 500.000 | no key pressed | + // +--------------------------------+------------------------+ + + adc-keys { + compatible = "adc-keys"; + io-channels = <&lradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <2000000>; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <1500000>; + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <1000000>; + }; + + button-enter { + label = "Enter"; + linux,code = <KEY_ENTER>; + press-threshold-microvolt = <500000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml new file mode 100644 index 000000000..336bc3525 --- /dev/null +++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/adi,adp5588.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADP5588 Keypad Controller + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices Mobile I/O Expander and QWERTY Keypad Controller + https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf + +allOf: + - $ref: matrix-keymap.yaml# + - $ref: input.yaml# + +properties: + compatible: + enum: + - adi,adp5587 + - adi,adp5588 + + reg: + maxItems: 1 + + vcc-supply: + description: Supply Voltage Input + + reset-gpios: + description: + If specified, it will be asserted during driver probe. As the line is + active low, it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: + description: + This property applies if either keypad,num-rows lower than 8 or + keypad,num-columns lower than 10. + + '#gpio-cells': + const: 2 + + interrupt-controller: + description: + This property applies if either keypad,num-rows lower than 8 or + keypad,num-columns lower than 10. This property is optional if + keypad,num-rows or keypad,num-columns are not specified as the + device is then configured to be used purely for gpio during which + interrupts may or may not be utilized. + + '#interrupt-cells': + const: 2 + + adi,unlock-keys: + description: + Specifies a maximum of 2 keys that can be used to unlock the keypad. + If this property is set, the keyboard will be locked and only unlocked + after these keys are pressed. If only one key is set, a double click is + needed to unlock the keypad. The value of this property cannot be bigger + or equal than keypad,num-rows * keypad,num-columns. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + +dependencies: + keypad,num-rows: + - linux,keymap + - keypad,num-columns + keypad,num-columns: + - linux,keymap + - keypad,num-rows + linux,keymap: + - keypad,num-rows + - keypad,num-columns + - interrupts + interrupt-controller: + - interrupts + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/input.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + keys@34 { + compatible = "adi,adp5588"; + reg = <0x34>; + + vcc-supply = <&vcc>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + + keypad,num-rows = <1>; + keypad,num-columns = <9>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + >; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + gpio@34 { + compatible = "adi,adp5588"; + reg = <0x34>; + + #gpio-cells = <2>; + gpio-controller; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml new file mode 100644 index 000000000..524c8b51f --- /dev/null +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 LRADC + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-lradc-keys + - const: allwinner,sun8i-a83t-r-lradc + - items: + - enum: + - allwinner,suniv-f1c100s-lradc + - allwinner,sun50i-a64-lradc + - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-r329-lradc + - items: + - enum: + - allwinner,sun50i-a100-lradc + - allwinner,sun50i-h616-lradc + - allwinner,sun20i-d1-lradc + - const: allwinner,sun50i-r329-lradc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + vref-supply: + description: + Regulator for the LRADC reference voltage + + wakeup-source: true + +patternProperties: + "^button-[0-9]+$": + type: object + $ref: input.yaml# + properties: + label: + description: Descriptive name of the key + + linux,code: true + + channel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: ADC Channel this key is attached to + + voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Voltage in microvolts at LRADC input when this key is + pressed + + required: + - label + - linux,code + - channel + - voltage + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - vref-supply + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-r329-lradc + +then: + required: + - clocks + - resets + +additionalProperties: false + +examples: + - | + lradc: lradc@1c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + vref-supply = <®_vcc3v0>; + + button-191 { + label = "Volume Up"; + linux,code = <115>; + channel = <0>; + voltage = <191274>; + }; + + button-392 { + label = "Volume Down"; + linux,code = <114>; + channel = <0>; + voltage = <392644>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml new file mode 100644 index 000000000..442f623bb --- /dev/null +++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ariel-pwrbutton.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dell Wyse 3020 a.k.a. "Ariel" Power Button + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +description: | + The ENE Embedded Controller on the Ariel board has an interface to the + SPI bus that is capable of sending keyboard and mouse data. A single + power button is attached to it. This binding describes this + configuration. + +allOf: + - $ref: input.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - const: dell,wyse-ariel-ec-input + - const: ene,kb3930-input + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + power-button@0 { + compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <60 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <33000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.yaml b/Documentation/devicetree/bindings/input/atmel,captouch.yaml new file mode 100644 index 000000000..f7477091d --- /dev/null +++ b/Documentation/devicetree/bindings/input/atmel,captouch.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/atmel,captouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel capacitive touch device + +maintainers: + - Dharma balasubiramani <dharma.b@microchip.com> + +description: + Atmel capacitive touch device, typically an Atmel touch sensor connected to + AtmegaXX MCU running firmware based on Qtouch library. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: atmel,captouch + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 8 + +required: + - compatible + - reg + - interrupts + - linux,keycodes + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touch@51 { + compatible = "atmel,captouch"; + reg = <0x51>; + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; + linux,keycodes = <BTN_0>, <BTN_1>, + <BTN_2>, <BTN_3>, + <BTN_4>, <BTN_5>, + <BTN_6>, <BTN_7>; + autorepeat; + }; + }; diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml new file mode 100644 index 000000000..26ea78df2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel maXTouch touchscreen/touchpad + +maintainers: + - Nick Dyer <nick@shmanahar.org> + - Linus Walleij <linusw@kernel.org> + +description: | + Atmel maXTouch touchscreen or touchpads such as the mXT244 + and similar devices. + +allOf: + - $ref: input.yaml# + - $ref: touchscreen/touchscreen.yaml# + +properties: + compatible: + const: atmel,maxtouch + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdda-supply: + description: + Optional regulator for the AVDD analog voltage. + + vdd-supply: + description: + Optional regulator for the VDD digital voltage. + + reset-gpios: + maxItems: 1 + description: + Optional GPIO specifier for the touchscreen's reset pin + (active low). The line must be flagged with + GPIO_ACTIVE_LOW. + + wake-gpios: + maxItems: 1 + description: + Optional GPIO specifier for the touchscreen's wake pin + (active low). The line must be flagged with + GPIO_ACTIVE_LOW. + + linux,gpio-keymap: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + When enabled, the SPT_GPIOPWN_T19 object sends messages + on GPIO bit changes. An array of up to 8 entries can be provided + indicating the Linux keycode mapped to each bit of the status byte, + starting at the LSB. Linux keycodes are defined in + <dt-bindings/input/input.h>. + + Note: the numbering of the GPIOs and the bit they start at varies + between maXTouch devices. You must either refer to the documentation, + or experiment to determine which bit corresponds to which input. Use + KEY_RESERVED for unused padding values. + + linux,keycodes: + minItems: 1 + maxItems: 8 + + atmel,wakeup-method: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The WAKE line is an active-low input that is used to wake up the touch + controller from deep-sleep mode before communication with the controller + could be started. This optional feature used to minimize current + consumption when the controller is in deep sleep mode. This feature is + relevant only to some controller families, like mXT1386 controller for + example. + + The WAKE pin can be connected in one of the following ways: + 1) left permanently low + 2) connected to the I2C-compatible SCL pin + 3) connected to a GPIO pin on the host + enum: + - 0 # ATMEL_MXT_WAKEUP_NONE + - 1 # ATMEL_MXT_WAKEUP_I2C_SCL + - 2 # ATMEL_MXT_WAKEUP_GPIO + default: 0 + + wakeup-source: true + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/atmel-maxtouch.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + vdda-supply = <&ab8500_ldo_aux2_reg>; + vdd-supply = <&ab8500_ldo_aux5_reg>; + atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/awinic,aw86927.yaml b/Documentation/devicetree/bindings/input/awinic,aw86927.yaml new file mode 100644 index 000000000..bd74b8148 --- /dev/null +++ b/Documentation/devicetree/bindings/input/awinic,aw86927.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/awinic,aw86927.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW86927 LRA Haptic IC + +maintainers: + - Griffin Kroah-Hartman <griffin.kroah@fairphone.com> + +properties: + compatible: + oneOf: + - const: awinic,aw86927 + - items: + - enum: + - awinic,aw86938 + - const: awinic,aw86927 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reset-gpios + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + vibrator@5a { + compatible = "awinic,aw86927"; + reg = <0x5a>; + interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml new file mode 100644 index 000000000..418c168b2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml @@ -0,0 +1,1148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS7222A/B/C/D Capacitive Touch Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS7222A, IQS7222B, IQS7222C and IQS7222D are multichannel + capacitive touch controllers that feature additional sensing capabilities. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs7222a + - azoteq,iqs7222b + - azoteq,iqs7222c + - azoteq,iqs7222d + + reg: + maxItems: 1 + + irq-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low RDY output. + + reset-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low MCLR input. The + device is temporarily held in hardware reset prior to initialization if + this property is present. + + azoteq,max-counts: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the maximum number of conversion periods (counts) that can be + reported as follows: + 0: 1023 + 1: 2047 + 2: 4095 + 3: 16384 + + azoteq,auto-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the number of conversions to occur before an interrupt is + generated as follows: + 0: 4 + 1: 8 + 2: 16 + 3: 32 + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI fine fractional divider. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI coarse fractional divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the preloaded ATI compensation selection. + + azoteq,lta-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + low-power mode. + + azoteq,lta-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + normal-power mode. + + azoteq,counts-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during low-power + mode. + + azoteq,counts-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during normal- + power mode. + + azoteq,lta-fast-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during low-power mode. + + azoteq,lta-fast-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during normal-power mode. + + azoteq,timeout-ati-ms: + multipleOf: 500 + minimum: 0 + maximum: 32767500 + description: + Specifies the delay (in ms) before ATI is retried following an ATI error. + + azoteq,rate-ati-ms: + minimum: 0 + maximum: 65535 + description: Specifies the rate (in ms) at which ATI status is evaluated. + + azoteq,timeout-np-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from normal-power mode to low-power mode. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,timeout-lp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from low-power mode to ultra-low-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,timeout-ulp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the rate (in ms) at which channels not regularly sampled during + ultra-low-power mode are updated. + + azoteq,rate-ulp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during ultra-low-power mode. + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + + trackpad: + type: object + description: Represents all channels associated with the trackpad. + + properties: + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 + items: + minimum: 0 + maximum: 13 + description: + Specifies the order of the channels that participate in the trackpad. + Specify 255 to omit a given channel for the purpose of mapping a non- + rectangular trackpad. + + azoteq,num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 12 + description: Specifies the number of rows that comprise the trackpad. + + azoteq,num-cols: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 12 + description: Specifies the number of columns that comprise the trackpad. + + azoteq,top-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is no longer applied. + + azoteq,bottom-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is linearly reduced. + + azoteq,use-prox: + type: boolean + description: + Directs the trackpad to respond to the proximity states of the + selected channels instead of their corresponding touch states. + Note the trackpad cannot report granular coordinates during a + state of proximity. + + patternProperties: + "^azoteq,lower-cal-(x|y)$": + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's lower starting points. + + "^azoteq,upper-cal-(x|y)$": + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's upper starting points. + + "^event-(press|tap|(swipe|flick)-(x|y)-(pos|neg))$": + type: object + $ref: input.yaml# + description: + Represents a press or gesture event reported by the trackpad. Specify + 'linux,code' under the press event to report absolute coordinates. + + properties: + linux,code: true + + azoteq,gesture-angle-tighten: + type: boolean + description: + Limits the tangent of the gesture angle to 0.5 (axial gestures + only). If specified in one direction, the effect is applied in + either direction. + + azoteq,gesture-max-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the length of time (in ms) within which a tap, swipe + or flick gesture must be completed in order to be acknowledged + by the device. The number specified for any one swipe or flick + gesture applies to all other swipe or flick gestures. + + azoteq,gesture-min-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the length of time (in ms) for which a tap gesture must + be held in order to be acknowledged by the device. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the distance (in coordinates) across which a swipe or + flick gesture must travel in order to be acknowledged by the + device. The number specified for any one swipe or flick gesture + applies to all remaining swipe or flick gestures. + + For tap gestures, this property specifies the distance from the + original point of contact across which the contact is permitted + to travel before the gesture is rejected by the device. + + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 + 2: GPIO4 + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + trackpad gesture). + + additionalProperties: false + + required: + - azoteq,channel-select + + additionalProperties: false + +patternProperties: + "^cycle-[0-9]$": + type: object + description: Represents a conversion cycle serving two sensing channels. + + properties: + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion frequency fraction. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + minimum: 0 + maximum: 8 + description: Specifies the CTx pin(s) associated with the cycle. + + azoteq,rx-float-inactive: + type: boolean + description: Floats any inactive CRx pins instead of grounding them. + + azoteq,dead-time-enable: + type: boolean + description: + Increases the denominator of the conversion frequency formula by one. + + azoteq,tx-freq-fosc: + type: boolean + description: + Fixes the conversion frequency to that of the device's core clock. + + azoteq,vbias-enable: + type: boolean + description: Enables the bias voltage for use during inductive sensing. + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the cycle's sensing mode as follows: + 0: None + 1: Self capacitive + 2: Mutual capacitive + 3: Inductive + + Note that in the case of IQS7222A, cycles 5 and 6 are restricted to + Hall-effect sensing. + + azoteq,iref-enable: + type: boolean + description: + Enables the current reference for use during various sensing modes. + + azoteq,iref-level: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference level. + + azoteq,iref-trim: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference trim. + + dependencies: + azoteq,iref-level: ["azoteq,iref-enable"] + azoteq,iref-trim: ["azoteq,iref-enable"] + + additionalProperties: false + + "^channel-([0-9]|1[0-9])$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + Note that in the case of IQS7222A, channels 10 and 11 are restricted to + Hall-effect sensing with events reported on channel 10 only. + + properties: + azoteq,ulp-allow: + type: boolean + description: + Permits the device to enter ultra-low-power mode while the channel + lies in a state of touch or proximity. + + azoteq,ref-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 9 + description: Specifies a separate reference channel to be followed. + + azoteq,ref-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the relative weight of the reference channel. + + azoteq,use-prox: + type: boolean + description: + Activates the reference channel in response to proximity events + instead of touch events. + + azoteq,counts-filt-enable: + type: boolean + description: Applies counts filtering to the channel. + + azoteq,ati-band: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's ATI band as a fraction of its ATI target as + follows: + 0: 1/16 + 1: 1/8 + 2: 1/4 + 3: 1/2 + + azoteq,global-halt: + type: boolean + description: + Specifies that the channel's long-term average is to freeze if any + other participating channel lies in a proximity or touch state. + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity and touch + events relative to their respective thresholds. + + azoteq,dual-direction: + type: boolean + description: + Specifies that the channel's long-term average is to freeze in the + presence of either increasing or decreasing counts, thereby permit- + ting events to be reported in either direction. + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 7 + description: Specifies the CRx pin(s) associated with the channel. + + azoteq,samp-cap-double: + type: boolean + description: Doubles the sampling capacitance from 40 pF to 80 pF. + + azoteq,vref-half: + type: boolean + description: Halves the discharge threshold from 1.0 V to 0.5 V. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the bias current applied during mutual (projected) + capacitive sensing as follows: + 0: 2 uA + 1: 5 uA + 2: 7 uA + 3: 10 uA + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 2040 + description: Specifies the channel's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 496 + description: Specifies the channel's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5] + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Compensation + 2: Compensation divider + 3: Fine fractional divider + 4: Coarse fractional divider + 5: Full + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI compensation divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the channel's ATI compensation selection. + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce exit factor. + + patternProperties: + "^event-(prox|touch)$": + type: object + $ref: input.yaml# + description: + Represents a proximity or touch event reported by the channel. + + properties: + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 + 2: GPIO4 + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider/trackpad gesture). + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the threshold for the event. Valid entries range from + 0-127 and 0-255 for proximity and touch events, respectively. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the hysteresis for the event (touch events only). + + azoteq,timeout-press-ms: + multipleOf: 500 + minimum: 0 + maximum: 127500 + description: + Specifies the length of time (in ms) to wait before automatically + releasing a press event. Specify zero to allow the press state to + persist indefinitely. + + The IQS7222B does not feature channel-specific timeouts; the time- + out specified for any one channel applies to all channels. + + linux,code: true + + linux,input-type: + enum: [1, 5] + default: 1 + description: + Specifies whether the event is to be interpreted as a key (1) + or a switch (5). + + additionalProperties: false + + dependencies: + azoteq,ref-weight: ["azoteq,ref-select"] + azoteq,use-prox: ["azoteq,ref-select"] + + additionalProperties: false + + "^slider-[0-1]$": + type: object + description: Represents a slider comprising three or four channels. + + properties: + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 4 + items: + minimum: 0 + maximum: 9 + description: + Specifies the order of the channels that participate in the slider. + + azoteq,slider-size: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 65535 + description: + Specifies the slider's one-dimensional resolution, equal to the + maximum coordinate plus one. + + azoteq,lower-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's lower starting point. + + azoteq,upper-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's upper starting point. + + azoteq,top-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is no longer applied. + + azoteq,bottom-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the speed (in coordinates traveled per conversion) after + which coordinate filtering is linearly reduced. + + azoteq,bottom-beta: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: + Specifies the coordinate filter damping factor to be applied + while the speed of movement is below that which is specified + by azoteq,bottom-speed. + + azoteq,static-beta: + type: boolean + description: + Applies the coordinate filter damping factor specified by + azoteq,bottom-beta regardless of the speed of movement. + + azoteq,use-prox: + type: boolean + description: + Directs the slider to respond to the proximity states of the selected + channels instead of their corresponding touch states. Note the slider + cannot report granular coordinates during a state of proximity. + + linux,axis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the absolute axis to which coordinates are mapped. Specify + ABS_WHEEL to operate the slider as a wheel (IQS7222C only). + + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + type: object + $ref: input.yaml# + description: + Represents a press or gesture (IQS7222A only) event reported by + the slider. + + properties: + linux,code: true + + azoteq,gesture-max-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the length of time (in ms) within which a tap, swipe + or flick gesture must be completed in order to be acknowledged + by the device. The number specified for any one swipe or flick + gesture applies to all remaining swipe or flick gestures. + + azoteq,gesture-min-ms: + multipleOf: 16 + minimum: 0 + maximum: 496 + description: + Specifies the length of time (in ms) for which a tap gesture must + be held in order to be acknowledged by the device. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the distance (in coordinates) across which a swipe or + flick gesture must travel in order to be acknowledged by the + device. The number specified for any one swipe or flick gesture + applies to all remaining swipe or flick gestures. + + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 + 2: GPIO4 + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider gesture). + + additionalProperties: false + + required: + - azoteq,channel-select + + additionalProperties: false + + "^gpio-[0-2]$": + type: object + description: | + Represents a GPIO mapped to one or more events as follows: + gpio-0: GPIO0 + gpio-1: GPIO3 + gpio-2: GPIO4 + + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + + properties: + drive-open-drain: true + + additionalProperties: false + +allOf: + - $ref: touchscreen/touchscreen.yaml# + + - if: + properties: + compatible: + contains: + enum: + - azoteq,iqs7222a + - azoteq,iqs7222b + - azoteq,iqs7222c + + then: + properties: + touchscreen-size-x: false + touchscreen-size-y: false + touchscreen-inverted-x: false + touchscreen-inverted-y: false + touchscreen-swapped-x-y: false + + trackpad: false + + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,counts-filt-enable: false + + - if: + properties: + compatible: + contains: + enum: + - azoteq,iqs7222b + - azoteq,iqs7222c + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ulp-allow: false + + - if: + properties: + compatible: + contains: + enum: + - azoteq,iqs7222b + - azoteq,iqs7222d + + then: + patternProperties: + "^cycle-[0-9]$": + properties: + azoteq,iref-enable: false + + "^channel-([0-9]|1[0-9])$": + properties: + azoteq,ref-select: false + + "^slider-[0-1]$": false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222b + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: false + + "^gpio-[0-2]$": false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222a + + then: + patternProperties: + "^channel-([0-9]|1[0-9])$": + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: + maxItems: 1 + items: + maximum: 0 + + "^slider-[0-1]$": + properties: + azoteq,slider-size: + multipleOf: 16 + minimum: 16 + maximum: 4080 + + azoteq,top-speed: + multipleOf: 4 + maximum: 1020 + + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + properties: + azoteq,gpio-select: + maxItems: 1 + items: + maximum: 0 + + else: + patternProperties: + "^slider-[0-1]$": + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + properties: + azoteq,gesture-max-ms: false + + azoteq,gesture-min-ms: false + + azoteq,gesture-dist: false + +required: + - compatible + - reg + - irq-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs7222a@44 { + compatible = "azoteq,iqs7222a"; + reg = <0x44>; + irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + azoteq,lta-beta-lp = <7>; + azoteq,lta-beta-np = <8>; + azoteq,counts-beta-lp = <2>; + azoteq,counts-beta-np = <3>; + azoteq,lta-fast-beta-lp = <3>; + azoteq,lta-fast-beta-np = <4>; + + cycle-0 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>, <2>, <4>, <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-1 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-2 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <4>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-3 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <2>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-4 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-5 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + cycle-6 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + channel-0 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <800>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-1 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-2 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-3 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-4 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-5 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <800>; + azoteq,ati-base = <144>; + azoteq,ati-mode = <5>; + }; + + channel-6 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_MUTE>; + }; + }; + + channel-7 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + channel-8 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_VOLUMEUP>; + }; + }; + + channel-9 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = <KEY_POWER>; + }; + }; + + channel-10 { + azoteq,ulp-allow; + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + + event-touch { + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + }; + }; + + channel-11 { + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + }; + + slider-0 { + azoteq,channel-select = <1>, <2>, <3>, <4>; + azoteq,slider-size = <4080>; + azoteq,upper-cal = <50>; + azoteq,lower-cal = <30>; + azoteq,top-speed = <200>; + azoteq,bottom-speed = <1>; + azoteq,bottom-beta = <3>; + + event-tap { + linux,code = <KEY_PLAYPAUSE>; + azoteq,gesture-max-ms = <400>; + azoteq,gesture-min-ms = <32>; + }; + + event-flick-pos { + linux,code = <KEY_NEXTSONG>; + azoteq,gesture-max-ms = <800>; + azoteq,gesture-dist = <800>; + }; + + event-flick-neg { + linux,code = <KEY_PREVIOUSSONG>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt new file mode 100644 index 000000000..262deab73 --- /dev/null +++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt @@ -0,0 +1,107 @@ +* Broadcom Keypad Controller device tree bindings + +Broadcom Keypad controller is used to interface a SoC with a matrix-type +keypad device. The keypad controller supports multiple row and column lines. +A key can be placed at each intersection of a unique row and a unique column. +The keypad controller can sense a key-press and key-release and report the +event using a interrupt to the cpu. + +This binding is based on the matrix-keymap binding with the following +changes: + +keypad,num-rows and keypad,num-columns are required. + +Required SoC Specific Properties: +- compatible: should be "brcm,bcm-keypad" + +- reg: physical base address of the controller and length of memory mapped + region. + +- interrupts: The interrupt number to the cpu. + +Board Specific Properties: +- keypad,num-rows: Number of row lines connected to the keypad + controller. + +- keypad,num-columns: Number of column lines connected to the + keypad controller. + +- col-debounce-filter-period: The debounce period for the Column filter. + + KEYPAD_DEBOUNCE_1_ms = 0 + KEYPAD_DEBOUNCE_2_ms = 1 + KEYPAD_DEBOUNCE_4_ms = 2 + KEYPAD_DEBOUNCE_8_ms = 3 + KEYPAD_DEBOUNCE_16_ms = 4 + KEYPAD_DEBOUNCE_32_ms = 5 + KEYPAD_DEBOUNCE_64_ms = 6 + KEYPAD_DEBOUNCE_128_ms = 7 + +- status-debounce-filter-period: The debounce period for the Status filter. + + KEYPAD_DEBOUNCE_1_ms = 0 + KEYPAD_DEBOUNCE_2_ms = 1 + KEYPAD_DEBOUNCE_4_ms = 2 + KEYPAD_DEBOUNCE_8_ms = 3 + KEYPAD_DEBOUNCE_16_ms = 4 + KEYPAD_DEBOUNCE_32_ms = 5 + KEYPAD_DEBOUNCE_64_ms = 6 + KEYPAD_DEBOUNCE_128_ms = 7 + +- row-output-enabled: An optional property indicating whether the row or + column is being used as output. If specified the row is being used + as the output. Else defaults to column. + +- pull-up-enabled: An optional property indicating the Keypad scan mode. + If specified implies the keypad scan pull-up has been enabled. + +- autorepeat: Boolean, Enable auto repeat feature of Linux input + subsystem (optional). + +- linux,keymap: The keymap for keys as described in the binding document + devicetree/bindings/input/matrix-keymap.txt. + +Example: +#include "dt-bindings/input/input.h" + +/ { + keypad: keypad@180ac000 { + /* Required SoC specific properties */ + compatible = "brcm,bcm-keypad"; + + /* Required Board specific properties */ + keypad,num-rows = <5>; + keypad,num-columns = <5>; + + linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */ + MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */ + MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */ + MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */ + MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */ + MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */ + MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */ + MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */ + MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */ + MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */ + MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */ + MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */ + MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */ + MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */ + MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */ + MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */ + MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */ + MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */ + MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */ + MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */ + MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */ + MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */ + MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */ + >; + + /* Optional board specific properties */ + col-debounce-filter-period = <5>; + row-output-enabled; + pull-up-enabled; + + }; +}; diff --git a/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml new file mode 100644 index 000000000..89bd06864 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cirrus,cs40l50.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS40L50 Advanced Haptic Driver + +maintainers: + - James Ogletree <jogletre@opensource.cirrus.com> + +description: + CS40L50 is a haptic driver with waveform memory, + integrated DSP, and closed-loop algorithms. + +properties: + compatible: + enum: + - cirrus,cs40l50 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-a-supply: + description: Power supply for internal analog circuits. + + vdd-p-supply: + description: Power supply for always-on circuits. + + vdd-io-supply: + description: Power supply for digital input/output. + + vdd-b-supply: + description: Power supply for the boost converter. + +required: + - compatible + - reg + - interrupts + - reset-gpios + - vdd-io-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptic-driver@34 { + compatible = "cirrus,cs40l50"; + reg = <0x34>; + interrupt-parent = <&gpio>; + interrupts = <113 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio 112 GPIO_ACTIVE_LOW>; + vdd-io-supply = <&vreg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml new file mode 100644 index 000000000..25b8b29c8 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cirrus,ep9307-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus ep93xx keypad + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + +allOf: + - $ref: input.yaml# + - $ref: /schemas/input/matrix-keymap.yaml# + +description: + The KPP is designed to interface with a keypad matrix with 2-point contact + or 3-point contact keys. The KPP is designed to simplify the software task + of scanning a keypad matrix. The KPP is capable of detecting, debouncing, + and decoding one or multiple keys pressed simultaneously on a keypad. + +properties: + compatible: + oneOf: + - const: cirrus,ep9307-keypad + - items: + - enum: + - cirrus,ep9312-keypad + - cirrus,ep9315-keypad + - const: cirrus,ep9307-keypad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + # Time for state change interrupt to trigger + debounce-delay-ms: true + + cirrus,prescale: + description: row/column counter pre-scaler load value + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 1023 + +required: + - compatible + - reg + - interrupts + - clocks + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/clock/cirrus,ep9301-syscon.h> + keypad@800f0000 { + compatible = "cirrus,ep9307-keypad"; + reg = <0x800f0000 0x0c>; + interrupt-parent = <&vic0>; + interrupts = <29>; + clocks = <&eclk EP93XX_CLK_KEYPAD>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default_pins>; + linux,keymap = <KEY_UP>, + <KEY_DOWN>, + <KEY_VOLUMEDOWN>, + <KEY_HOME>, + <KEY_RIGHT>, + <KEY_LEFT>, + <KEY_ENTER>, + <KEY_VOLUMEUP>, + <KEY_F6>, + <KEY_F8>, + <KEY_F9>, + <KEY_F10>, + <KEY_F1>, + <KEY_F2>, + <KEY_F3>, + <KEY_POWER>; + }; diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt new file mode 100644 index 000000000..3eed8819d --- /dev/null +++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt @@ -0,0 +1,27 @@ +* Cirrus Logic CLPS711X matrix keypad device tree bindings + +Required Properties: +- compatible: Shall contain "cirrus,ep7209-keypad". +- row-gpios: List of GPIOs used as row lines. +- poll-interval: Poll interval time in milliseconds. +- linux,keymap: The definition can be found at + bindings/input/matrix-keymap.txt. + +Optional Properties: +- autorepeat: Enable autorepeat feature. + +Example: + keypad { + compatible = "cirrus,ep7312-keypad", "cirrus,ep7209-keypad"; + autorepeat; + poll-interval = <120>; + row-gpios = <&porta 0 0>, + <&porta 1 0>; + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_RIGHT) + >; + }; diff --git a/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt b/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt new file mode 100644 index 000000000..0dd0076da --- /dev/null +++ b/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt @@ -0,0 +1,20 @@ +Motorola CPCAP on key + +This module is part of the CPCAP. For more details about the whole +chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt. + +This module provides a simple power button event via an Interrupt. + +Required properties: +- compatible: should be one of the following + - "motorola,cpcap-pwrbutton" +- interrupts: irq specifier for CPCAP's ON IRQ + +Example: + +&cpcap { + cpcap_pwrbutton: pwrbutton { + compatible = "motorola,cpcap-pwrbutton"; + interrupts = <23 IRQ_TYPE_NONE>; + }; +}; diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml new file mode 100644 index 000000000..da629d511 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: cypress,cyapa + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: true + + vcc-supply: + description: 3.3V power + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + trackpad@67 { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml new file mode 100644 index 000000000..52dca8b64 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cypress,tm2-touchkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung TM2 touch key controller + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +description: | + Touch key controllers similar to the TM2 can be found in a wide range of + Samsung devices. They are implemented using many different MCUs, but use + a similar I2C protocol. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + enum: + - cypress,tm2-touchkey + - cypress,midas-touchkey + - cypress,aries-touchkey + - coreriver,tc360-touchkey + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Optional regulator for LED voltage, 3.3V. + + vcc-supply: + description: Optional regulator for MCU, 1.8V-3.3V (depending on MCU). + + vddio-supply: + description: | + Optional regulator that provides digital I/O voltage, + e.g. for pulling up the interrupt line or the I2C pins. + + linux,keycodes: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + interrupt-parent = <&gpa3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&ldo32_reg>; + vdd-supply = <&ldo33_reg>; + linux,keycodes = <KEY_MENU KEY_BACK>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/cypress-sf.yaml b/Documentation/devicetree/bindings/input/cypress-sf.yaml new file mode 100644 index 000000000..c0b051466 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cypress-sf.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cypress-sf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress StreetFighter touchkey controller + +maintainers: + - Yassine Oudjana <y.oudjana@protonmail.com> + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: cypress,sf3155 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + avdd-supply: + description: Regulator for AVDD analog voltage + + vdd-supply: + description: Regulator for VDD digital voltage + + linux,keycodes: + minItems: 1 + maxItems: 8 + +required: + - compatible + - reg + - interrupts + - avdd-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchkey@28 { + compatible = "cypress,sf3155"; + reg = <0x28>; + interrupt-parent = <&msmgpio>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + linux,keycodes = <KEY_BACK KEY_MENU>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.yaml b/Documentation/devicetree/bindings/input/dlg,da7280.yaml new file mode 100644 index 000000000..0d06755aa --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da7280.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/dlg,da7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA7280 Low Power High-Definition Haptic Driver + +maintainers: + - Roy Im <roy.im.opensource@diasemi.com> + +properties: + compatible: + const: dlg,da7280 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + + dlg,actuator-type: + enum: + - LRA # Linear Resonance Actuator type + - ERM-bar # Bar type Eccentric Rotating Mass + - ERM-coin # Coin type Eccentric Rotating Mass + + dlg,const-op-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # Direct register override (DRO) mode triggered by i2c (default) + - 2 # PWM data source mode controlled by PWM duty + description: + Haptic operation mode for FF_CONSTANT + + dlg,periodic-op-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # Register triggered waveform memory(RTWM) mode, the pattern + # assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP + - 2 # Edge triggered waveform memory(ETWM) mode, external GPI(N) + # control are required to enable/disable and it needs to keep + # device enabled by sending magnitude (X > 0), + # the pattern is assigned to the GPI(N)_SEQUENCE_ID below + default: 1 + description: + Haptic operation mode for FF_PERIODIC. + The default value is 1 for both of the operation modes. + For more details, please see the datasheet + + dlg,nom-microvolt: + minimum: 0 + maximum: 6000000 + description: + Nominal actuator voltage rating + + dlg,abs-max-microvolt: + minimum: 0 + maximum: 6000000 + description: + Absolute actuator maximum voltage rating + + dlg,imax-microamp: + minimum: 0 + maximum: 252000 + default: 130000 + description: + Actuator max current rating + + dlg,impd-micro-ohms: + minimum: 0 + maximum: 1500000000 + description: + Impedance of the actuator + + pwms: + maxItems: 1 + + dlg,ps-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + The PS_SEQ_ID(pattern ID in waveform memory inside chip) + to play back when RTWM-MODE is enabled + + dlg,ps-seq-loop: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + The PS_SEQ_LOOP, Number of times the pre-stored sequence pointed to by + PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated + + dlg,gpi0-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + the GPI0_SEQUENCE_ID, pattern to play when gpi0 is triggered + + dlg,gpi1-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + the GPI1_SEQUENCE_ID, pattern to play when gpi1 is triggered + + dlg,gpi2-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + the GPI2_SEQUENCE_ID, pattern to play when gpi2 is triggered + + dlg,gpi0-mode: + enum: + - Single-pattern + - Multi-pattern + description: + Pattern mode for gpi0 + + dlg,gpi1-mode: + enum: + - Single-pattern + - Multi-pattern + description: + Pattern mode for gpi1 + + dlg,gpi2-mode: + enum: + - Single-pattern + - Multi-pattern + description: + Pattern mode for gpi2 + + dlg,gpi0-polarity: + enum: + - Rising-edge + - Falling-edge + - Both-edge + description: + gpi0 polarity, Haptic will work by this edge option in case of ETWM mode + + dlg,gpi1-polarity: + enum: + - Rising-edge + - Falling-edge + - Both-edge + description: + gpi1 polarity, Haptic will work by this edge option in case of ETWM mode + + dlg,gpi2-polarity: + enum: + - Rising-edge + - Falling-edge + - Both-edge + description: + gpi2 polarity, Haptic will work by this edge option in case of ETWM mode + + dlg,resonant-freq-hz: + minimum: 50 + maximum: 300 + default: 205 + + dlg,bemf-sens-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for internal loop computations + + dlg,freq-track-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for resonant frequency tracking + + dlg,acc-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for active acceleration + + dlg,rapid-stop-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for rapid stop + + dlg,amp-pid-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for the amplitude PID + + dlg,mem-array: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 100 + description: + Customized waveform memory (patterns) data downloaded to the device during initialization. + Each entry value must be included between 0 and 255. + +required: + - compatible + - reg + - interrupts + - dlg,actuator-type + - dlg,const-op-mode + - dlg,periodic-op-mode + - dlg,nom-microvolt + - dlg,abs-max-microvolt + - dlg,imax-microamp + - dlg,impd-micro-ohms + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptics@4a { + compatible = "dlg,da7280"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + dlg,actuator-type = "LRA"; + dlg,const-op-mode = <1>; + dlg,periodic-op-mode = <1>; + dlg,nom-microvolt = <2000000>; + dlg,abs-max-microvolt = <2000000>; + dlg,imax-microamp = <170000>; + dlg,resonant-freq-hz = <180>; + dlg,impd-micro-ohms = <10500000>; + dlg,freq-track-enable; + dlg,rapid-stop-enable; + dlg,mem-array = <0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml new file mode 100644 index 000000000..1480d9542 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9061/62/63 OnKey Module + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This module is part of the DA9061/DA9062/DA9063. For more details about entire + DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + + This module provides the KEY_POWER event. + +properties: + compatible: + oneOf: + - enum: + - dlg,da9062-onkey + - dlg,da9063-onkey + - items: + - const: dlg,da9061-onkey + - const: dlg,da9062-onkey + + dlg,disable-key-power: + type: boolean + description: + Disable power-down using a long key-press. If this entry exists + the OnKey driver will remove support for the KEY_POWER key press + when triggered using a long press of the OnKey. + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt new file mode 100644 index 000000000..10dec1c57 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt @@ -0,0 +1,21 @@ +* D-Link DIR-685 Touchkeys + +This is a I2C one-off touchkey controller based on the Cypress Semiconductor +CY8C214 MCU with some firmware in its internal 8KB flash. The circuit +board inside the router is named E119921. + +The touchkey device node should be placed inside an I2C bus node. + +Required properties: +- compatible: must be "dlink,dir685-touchkeys" +- reg: the I2C address of the touchkeys +- interrupts: reference to the interrupt number + +Example: + +touchkeys@26 { + compatible = "dlink,dir685-touchkeys"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt new file mode 100644 index 000000000..907b195f2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/e3x0-button.txt @@ -0,0 +1,23 @@ +National Instruments Ettus Research USRP E3x0 button driver + +This module is part of the NI Ettus Research USRP E3x0 SDR. + +This module provides a simple power button event via two interrupts. + +Required properties: +- compatible: should be one of the following + - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0 +- interrupts: should be one of the following + - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0 +- interrupt-names: should be one of the following + - "press", "release": For devices such as the NI Ettus Research USRP E3x0 + +Note: Interrupt numbers might vary depending on the FPGA configuration. + +Example: + button { + compatible = "ettus,e3x0-button"; + interrupt-parent = <&intc>; + interrupts = <0 30 1>, <0 31 1>; + interrupt-names = "press", "release"; + } diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml new file mode 100644 index 000000000..24dc2d696 --- /dev/null +++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/elan,ekth3000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elantech I2C Touchpad + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen/touchscreen.yaml# + +properties: + compatible: + const: elan,ekth3000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: + type: boolean + description: touchpad can be used as a wakeup source + + vcc-supply: + description: a phandle for the regulator supplying 3.3V power + + elan,trackpoint: + type: boolean + description: touchpad can support a trackpoint + + elan,clickpad: + type: boolean + description: touchpad is a clickpad (the entire surface is a button) + + elan,middle-button: + type: boolean + description: touchpad has a physical middle button + + elan,x_traces: + $ref: /schemas/types.yaml#/definitions/uint32 + description: number of antennas on the x axis + + elan,y_traces: + $ref: /schemas/types.yaml#/definitions/uint32 + description: number of antennas on the y axis + + touchscreen-size-x: true + + touchscreen-size-y: true + + touchscreen-x-mm: true + + touchscreen-y-mm: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml new file mode 100644 index 000000000..0840e4ab2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elan I2C-HID touchscreen controllers + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +description: + Supports the Elan eKTH6915 and other I2C-HID touchscreen controllers. + These touchscreen controller use the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - elan,ekth5015m + - const: elan,ekth6915 + - items: + - const: elan,ekth8d18 + - const: elan,ekth6a12nay + - enum: + - elan,ekth6915 + - elan,ekth6a12nay + + reg: true + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. + + no-reset-on-power-off: + type: boolean + description: + Reset line is wired so that it can (and should) be left deasserted when + the power supply is off. + + vcc33-supply: + description: The 3.3V supply to the touchscreen. + + vccio-supply: + description: + The IO supply to the touchscreen. Need not be specified if this is the + same as the 3.3V supply. + +required: + - compatible + - reg + - interrupts + - vcc33-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@10 { + compatible = "elan,ekth5015m", "elan,ekth6915"; + reg = <0x10>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_ts>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/focaltech,ft8112.yaml b/Documentation/devicetree/bindings/input/focaltech,ft8112.yaml new file mode 100644 index 000000000..5ffa1246a --- /dev/null +++ b/Documentation/devicetree/bindings/input/focaltech,ft8112.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/focaltech,ft8112.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FocalTech FT8112 touchscreen controller + +maintainers: + - Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> + +description: + Supports the FocalTech FT8112 touchscreen controller. + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - focaltech,ft3d81 + - const: focaltech,ft8112 + - enum: + - focaltech,ft8112 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + + vcc33-supply: true + + vccio-supply: true + +required: + - compatible + - reg + - interrupts + - vcc33-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@38 { + compatible = "focaltech,ft8112"; + reg = <0x38>; + + interrupt-parent = <&pio>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 126 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_tchscr_x>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml new file mode 100644 index 000000000..5139af287 --- /dev/null +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/fsl,mpr121-touchkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MPR121 capacitive touch sensor controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +description: | + The MPR121 supports up to 12 completely independent electrodes/capacitance + sensing inputs in which 8 are multifunctional for LED driving and GPIO. + https://www.nxp.com/docs/en/data-sheet/MPR121.pdf + +allOf: + - $ref: input.yaml# + +anyOf: + - required: [ interrupts ] + - required: [ poll-interval ] + +properties: + compatible: + const: fsl,mpr121-touchkey + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + + linux,keycodes: + minItems: 1 + maxItems: 12 + + wakeup-source: + description: Use any event on keypad as wakeup event. + type: boolean + +required: + - compatible + - reg + - vdd-supply + - linux,keycodes + +unevaluatedProperties: false + +examples: + - | + // Example with interrupts + #include "dt-bindings/input/input.h" + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchkey@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + interrupt-parent = <&gpio1>; + interrupts = <28 2>; + autorepeat; + vdd-supply = <&ldo4_reg>; + linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>, + <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>, + <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>; + }; + }; + + - | + // Example with polling + #include "dt-bindings/input/input.h" + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchkey@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + poll-interval = <20>; + autorepeat; + vdd-supply = <&ldo4_reg>; + linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>, + <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>, + <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml new file mode 100644 index 000000000..2566cffc2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - SCU Key Based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + items: + - enum: + - fsl,imx8qm-sc-key + - fsl,imx8qxp-sc-key + - const: fsl,imx-sc-key + + linux,keycodes: + maxItems: 1 + + wakeup-source: true + +required: + - compatible + - linux,keycodes + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + + keys { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + }; diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml new file mode 100644 index 000000000..358cb8275 --- /dev/null +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix GT7375P touchscreen + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +description: + Supports the Goodix GT7375P touchscreen. + This touchscreen uses the i2c-hid protocol but has some non-standard + power sequencing required. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + oneOf: + - const: goodix,gt7375p + - items: + - const: goodix,gt7986u + - const: goodix,gt7375p + + reg: + enum: + - 0x5d + - 0x14 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + true + + vdd-supply: + description: The 3.3V supply to the touchscreen. + + mainboard-vddio-supply: + description: + The supply on the main board needed to power up IO signals going + to the touchscreen. This supply need not go to the touchscreen + itself as long as it allows the main board to make signals compatible + with what the touchscreen is expecting for its IO rails. + + goodix,no-reset-during-suspend: + description: + Set this to true to enforce the driver to not assert the reset GPIO + during suspend. + Due to potential touchscreen hardware flaw, back-powering could happen in + suspend if the power supply is on and with active-low reset GPIO asserted. + This property is used to avoid the back-powering issue. + type: boolean + +required: + - compatible + - reg + - interrupts + - reset-gpios + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ap_ts: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + vdd-supply = <&pp3300_ts>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml new file mode 100644 index 000000000..92bd0041f --- /dev/null +++ b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/goodix,gt7986u-spifw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix GT7986U SPI HID Touchscreen + +maintainers: + - Charles Wang <charles.goodix@gmail.com> + +description: | + Supports the Goodix GT7986U touchscreen. + This touch controller reports data packaged according to the HID protocol + over the SPI bus, but it is incompatible with Microsoft's HID-over-SPI protocol. + + NOTE: these bindings are distinct from the bindings used with the + GT7986U when the chip is running I2C firmware. This is because there's + not a single device that talks over both I2C and SPI but rather + distinct touchscreens that happen to be built with the same ASIC but + that are distinct products running distinct firmware. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - goodix,gt7986u-spifw + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + spi-max-frequency: true + +required: + - compatible + - reg + - interrupts + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "goodix,gt7986u-spifw"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml new file mode 100644 index 000000000..fefaaf46a --- /dev/null +++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/input/google,cros-ec-keyb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC Keyboard + +maintainers: + - Simon Glass <sjg@chromium.org> + - Benson Leung <bleung@chromium.org> + +description: | + Google's ChromeOS EC Keyboard is a simple matrix keyboard + implemented on a separate EC (Embedded Controller) device. It provides + a message for reading key scans from the EC. These are then converted + into keycodes for processing by the kernel. This device also supports + switches/buttons like power and volume buttons. + +properties: + compatible: + oneOf: + - description: ChromeOS EC with only buttons/switches + const: google,cros-ec-keyb-switches + - description: ChromeOS EC with keyboard and possibly buttons/switches + const: google,cros-ec-keyb + + google,needs-ghost-filter: + description: + Enable a ghost filter for the matrix keyboard. This is recommended + if the EC does not have its own logic or hardware for this. + type: boolean + + function-row-physmap: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 15 + description: | + An ordered u32 array describing the rows/columns (in the scan matrix) + of top row keys from physical left (KEY_F1) to right. Each entry + encodes the row/column as: + (((row) & 0xFF) << 24) | (((column) & 0xFF) << 16) + where the lower 16 bits are reserved. This property is specified only + when the keyboard has a custom design for the top row keys. + +dependencies: + function-row-physmap: [ 'linux,keymap' ] + google,needs-ghost-filter: [ 'linux,keymap' ] + +required: + - compatible + +if: + properties: + compatible: + contains: + const: google,cros-ec-keyb +then: + $ref: /schemas/input/matrix-keymap.yaml# + required: + - keypad,num-rows + - keypad,num-columns + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + keyboard-controller { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + /* + * Keymap entries take the form of 0xRRCCKKKK where + * RR=Row CC=Column KKKK=Key Code + * The values below are for a US keyboard layout and + * are taken from the Linux driver. Note that the + * 102ND key is not used for US keyboards. + */ + linux,keymap = < + /* CAPSLCK F1 B F10 */ + 0x0001003a 0x0002003b 0x00030030 0x00040044 + /* N = R_ALT ESC */ + 0x00060031 0x0008000d 0x000a0064 0x01010001 + /* F4 G F7 H */ + 0x0102003e 0x01030022 0x01040041 0x01060023 + /* ' F9 BKSPACE L_CTRL */ + 0x01080028 0x01090043 0x010b000e 0x0200001d + /* TAB F3 T F6 */ + 0x0201000f 0x0202003d 0x02030014 0x02040040 + /* ] Y 102ND [ */ + 0x0205001b 0x02060015 0x02070056 0x0208001a + /* F8 GRAVE F2 5 */ + 0x02090042 0x03010029 0x0302003c 0x03030006 + /* F5 6 - \ */ + 0x0304003f 0x03060007 0x0308000c 0x030b002b + /* R_CTRL A D F */ + 0x04000061 0x0401001e 0x04020020 0x04030021 + /* S K J ; */ + 0x0404001f 0x04050025 0x04060024 0x04080027 + /* L ENTER Z C */ + 0x04090026 0x040b001c 0x0501002c 0x0502002e + /* V X , M */ + 0x0503002f 0x0504002d 0x05050033 0x05060032 + /* L_SHIFT / . SPACE */ + 0x0507002a 0x05080035 0x05090034 0x050B0039 + /* 1 3 4 2 */ + 0x06010002 0x06020004 0x06030005 0x06040003 + /* 8 7 0 9 */ + 0x06050009 0x06060008 0x0608000b 0x0609000a + /* L_ALT DOWN RIGHT Q */ + 0x060a0038 0x060b006c 0x060c006a 0x07010010 + /* E R W I */ + 0x07020012 0x07030013 0x07040011 0x07050017 + /* U R_SHIFT P O */ + 0x07060016 0x07070036 0x07080019 0x07090018 + /* UP LEFT */ + 0x070b0067 0x070c0069>; + }; + - | + /* No matrix keyboard, just buttons/switches */ + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +... diff --git a/Documentation/devicetree/bindings/input/google,goldfish-events-keypad.yaml b/Documentation/devicetree/bindings/input/google,goldfish-events-keypad.yaml new file mode 100644 index 000000000..4e3a010a7 --- /dev/null +++ b/Documentation/devicetree/bindings/input/google,goldfish-events-keypad.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/google,goldfish-events-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Android Goldfish Events Keypad + +maintainers: + - Kuan-Wei Chiu <visitorckw@gmail.com> + +allOf: + - $ref: input.yaml# + +description: + Android goldfish events keypad device generated by android emulator. + +properties: + compatible: + const: google,goldfish-events-keypad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + keypad@9040000 { + compatible = "google,goldfish-events-keypad"; + reg = <0x9040000 0x1000>; + interrupts = <5>; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.yaml b/Documentation/devicetree/bindings/input/gpio-beeper.yaml new file mode 100644 index 000000000..290372add --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-beeper.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-beeper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled beeper + +maintainers: + - Fabio Estevam <festevam@denx.de> + +properties: + compatible: + const: gpio-beeper + + gpios: + maxItems: 1 + description: + GPIO that drives the beeper. + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + beeper { + compatible = "gpio-beeper"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-charlieplex-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-charlieplex-keypad.yaml new file mode 100644 index 000000000..c6842c017 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-charlieplex-keypad.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/input/gpio-charlieplex-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO charlieplex keypad + +maintainers: + - Hugo Villeneuve <hvilleneuve@dimonoff.com> + +description: | + The charlieplex keypad supports (N^2)-N different key combinations (where N is + the number of I/O lines). Key presses and releases are detected by configuring + only one line as output at a time, and reading other line states. This process + is repeated for each line. Diodes are required to ensure current flows in only + one direction between any pair of pins, as well as pull-up or pull-down + resistors on all I/O lines. + This mechanism doesn't allow to detect simultaneous key presses. + + Wiring example for 3 lines keyboard with 6 switches and 3 diodes (pull-up/down + resistors not shown but needed on L0, L1 and L2): + + L0 --+---------------------+----------------------+ + | | | + L1 -------+-----------+---------------------+ | + | | | | | | + L2 -------------+----------------+-----+ | | + | | | | | | | | | + | | | | | | | | | + | S1 \ S2 \ | S3 \ S4 \ | S5 \ S6 \ + | | | | | | | | | + | +--+--+ | +--+--+ | +--+--+ + | | | | | | + | D1 v | D2 v | D3 v + | - (k) | - (k) | - (k) + | | | | | | + +-------+ +-------+ +-------+ + + L: GPIO line + S: switch + D: diode (k indicates cathode) + +allOf: + - $ref: input.yaml# + - $ref: /schemas/input/matrix-keymap.yaml# + +properties: + compatible: + const: gpio-charlieplex-keypad + + autorepeat: true + + debounce-delay-ms: + default: 5 + + line-gpios: + description: + List of GPIOs used as lines. The gpio specifier for this property + depends on the gpio controller to which these lines are connected. + + linux,keymap: true + + poll-interval: true + + settling-time-us: true + + wakeup-source: true + +required: + - compatible + - line-gpios + - linux,keymap + - poll-interval + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + + keyboard { + compatible = "gpio-charlieplex-keypad"; + debounce-delay-ms = <20>; + poll-interval = <5>; + settling-time-us = <2>; + + line-gpios = <&gpio2 25 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN) + &gpio2 26 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN) + &gpio2 27 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; + + /* MATRIX_KEY(output, input, key-code) */ + linux,keymap = < + /* + * According to wiring diagram above, if L1 is configured as + * output and HIGH, and we detect a HIGH level on input L0, + * then it means S1 is pressed: MATRIX_KEY(L1, L0, KEY...) + */ + MATRIX_KEY(1, 0, KEY_F1) /* S1 */ + MATRIX_KEY(2, 0, KEY_F2) /* S2 */ + MATRIX_KEY(0, 1, KEY_F3) /* S3 */ + MATRIX_KEY(2, 1, KEY_F4) /* S4 */ + MATRIX_KEY(1, 2, KEY_F5) /* S5 */ + MATRIX_KEY(0, 2, KEY_F6) /* S6 */ + >; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt new file mode 100644 index 000000000..14a77fb96 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt @@ -0,0 +1,23 @@ +* GPIO Decoder DT bindings + +Required Properties: +- compatible: should be "gpio-decoder" +- gpios: a spec of gpios (at least two) to be decoded to a number with + first entry representing the MSB. + +Optional Properties: +- decoder-max-value: Maximum possible value that can be reported by + the gpios. +- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y). + Defaults to 0 (ABS_X). + +Example: + gpio-decoder0 { + compatible = "gpio-decoder"; + gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>, + <&pca9536 2 GPIO_ACTIVE_HIGH>, + <&pca9536 1 GPIO_ACTIVE_HIGH>, + <&pca9536 0 GPIO_ACTIVE_HIGH>; + linux,axis = <0>; /* ABS_X */ + decoder-max-value = <9>; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml new file mode 100644 index 000000000..cc78c2152 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO attached keys + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + enum: + - gpio-keys + - gpio-keys-polled + + autorepeat: true + + label: + description: Name of entire device + + poll-interval: true + +patternProperties: + "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$": + $ref: input.yaml# + + properties: + gpios: + maxItems: 1 + + interrupts: + oneOf: + - items: + - description: Optional key interrupt or wakeup interrupt + - items: + - description: Key interrupt + - description: Wakeup interrupt + + interrupt-names: + description: + Optional interrupt names, can be used to specify a separate dedicated + wake-up interrupt in addition to the gpio irq + oneOf: + - items: + - enum: [ irq, wakeup ] + - items: + - const: irq + - const: wakeup + + label: + description: Descriptive name of the key. + + linux,code: + description: Key / Axis code to emit. + + linux,input-type: + default: 1 # EV_KEY + + linux,input-value: + description: | + If linux,input-type is EV_ABS or EV_REL then this + value is sent for events this button generates when pressed. + EV_ABS/EV_REL axis will generate an event with a value of 0 + when all buttons with linux,input-type == type and + linux,code == axis are released. This value is interpreted + as a signed 32 bit value, e.g. to make a button generate a + value of -1 use: + + linux,input-value = <0xffffffff>; /* -1 */ + + $ref: /schemas/types.yaml#/definitions/uint32 + + debounce-interval: + description: + Debouncing interval time in milliseconds. If not specified defaults to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + + default: 5 + + wakeup-source: + description: Button can wake-up the system. + + wakeup-event-action: + description: | + Specifies whether the key should wake the system when asserted, when + deasserted, or both. This property is only valid for keys that wake up the + system (e.g., when the "wakeup-source" property is also provided). + + Supported values are defined in linux-event-codes.h: + + EV_ACT_ANY - both asserted and deasserted + EV_ACT_ASSERTED - asserted + EV_ACT_DEASSERTED - deasserted + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + linux,can-disable: + description: + Indicates that button is connected to dedicated (not shared) interrupt + which can be disabled to suppress events from the button. + type: boolean + + required: + - linux,code + + anyOf: + - required: + - interrupts + - required: + - interrupts-extended + - required: + - gpios + + allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + properties: + interrupt-names: + minItems: 2 + required: + - interrupt-names + + dependencies: + wakeup-event-action: [ wakeup-source ] + linux,input-value: [ gpios ] + + unevaluatedProperties: false + +allOf: + - $ref: input.yaml# + - if: + properties: + compatible: + const: gpio-keys-polled + then: + required: + - poll-interval + else: + properties: + poll-interval: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-up { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio1 0 1>; + }; + + key-down { + label = "GPIO Key DOWN"; + linux,code = <108>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + key-wakeup { + label = "GPIO Key WAKEUP"; + linux,code = <143>; + interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>, + <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml new file mode 100644 index 000000000..69df24a5a --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/input/gpio-matrix-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO matrix keypad + +maintainers: + - Marek Vasut <marek.vasut@gmail.com> + +description: + GPIO driven matrix keypad is used to interface a SoC with a matrix keypad. + The matrix keypad supports multiple row and column lines, a key can be + placed at each intersection of a unique row and a unique column. The matrix + keypad can sense a key-press and key-release by means of GPIO lines and + report the event using GPIO interrupts to the cpu. + +allOf: + - $ref: input.yaml# + - $ref: /schemas/input/matrix-keymap.yaml# + +properties: + compatible: + const: gpio-matrix-keypad + + row-gpios: + description: + List of GPIOs used as row lines. The gpio specifier for this property + depends on the gpio controller to which these row lines are connected. + + col-gpios: + description: + List of GPIOs used as column lines. The gpio specifier for this property + depends on the gpio controller to which these column lines are connected. + + linux,keymap: true + + linux,no-autorepeat: + type: boolean + description: Do not enable autorepeat feature. + + gpio-activelow: + type: boolean + description: + Force GPIO polarity to active low. + In the absence of this property GPIOs are treated as active high. + + debounce-delay-ms: true + + col-scan-delay-us: + description: + Delay, measured in microseconds, that is needed + before we can scan keypad after activating column gpio. + default: 0 + + all-cols-on-delay-us: + description: + Delay, measured in microseconds, that is needed + after activating all column gpios. + default: 0 + + drive-inactive-cols: + type: boolean + description: + Drive inactive columns during scan, + default is to turn inactive columns into inputs. + + wakeup-source: true + +required: + - compatible + - row-gpios + - col-gpios + - linux,keymap + +additionalProperties: false + +examples: + - | + matrix-keypad { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio2 25 0 + &gpio2 26 0 + &gpio2 27 0>; + + col-gpios = <&gpio2 21 0 + &gpio2 22 0>; + + linux,keymap = <0x0000008B + 0x0100009E + 0x02000069 + 0x0001006A + 0x0101001C + 0x0201006C>; + + wakeup-source; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.yaml b/Documentation/devicetree/bindings/input/gpio-mouse.yaml new file mode 100644 index 000000000..3928ec6af --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-mouse.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-mouse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO attached mouse + +description: | + This simply uses standard GPIO handles to define a simple mouse connected + to 5-7 GPIO lines. + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + const: gpio-mouse + + scan-interval-ms: + maxItems: 1 + + up-gpios: + maxItems: 1 + + down-gpios: + maxItems: 1 + + left-gpios: + maxItems: 1 + + right-gpios: + maxItems: 1 + + button-left-gpios: + maxItems: 1 + + button-middle-gpios: + maxItems: 1 + + button-right-gpios: + maxItems: 1 + +required: + - compatible + - scan-interval-ms + - up-gpios + - down-gpios + - left-gpios + - right-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + gpio-mouse { + compatible = "gpio-mouse"; + scan-interval-ms = <50>; + up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml new file mode 100644 index 000000000..2384465ea --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-vibrator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO vibrator + +maintainers: + - Luca Weiss <luca@z3ntu.xyz> + +description: |+ + Registers a GPIO device as vibrator, where the on/off capability is controlled by a GPIO. + +properties: + compatible: + const: gpio-vibrator + + enable-gpios: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power + +required: + - compatible + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml new file mode 100644 index 000000000..138caad96 --- /dev/null +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HID over I2C Devices + +maintainers: + - Benjamin Tissoires <benjamin.tissoires@redhat.com> + - Jiri Kosina <jkosina@suse.cz> + +description: |+ + HID over I2C provides support for various Human Interface Devices over the + I2C bus. These devices can be for example touchpads, keyboards, touch screens + or sensors. + + The specification has been written by Microsoft and is currently available here: + https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx + + If this binding is used, the kernel module i2c-hid will handle the communication + with the device and the generic hid core layer will handle the protocol. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - wacom,w9013 + - const: hid-over-i2c + - description: Just "hid-over-i2c" alone is allowed, but not recommended. + const: hid-over-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + hid-descr-addr: + description: HID descriptor address + $ref: /schemas/types.yaml#/definitions/uint32 + + panel: true + + post-power-on-delay-ms: + description: Time required by the device after enabling its regulators + or powering it on, before it is ready for communication. + + touchscreen-inverted-x: true + + touchscreen-inverted-y: true + + vdd-supply: + description: 3.3V supply + + vddl-supply: + description: 1.8V supply + + wakeup-source: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + interrupts = <3 2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml new file mode 100644 index 000000000..29a1879e3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM Operation Panel + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +allOf: + - $ref: input.yaml# + +description: | + The IBM Operation Panel provides a simple interface to control the connected + server. It has a display and three buttons: two directional arrows and one + 'Enter' button. + +properties: + compatible: + const: ibm,op-panel + + reg: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 3 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/i2c/i2c.h> + #include <dt-bindings/input/input.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ibm-op-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml new file mode 100644 index 000000000..1abeec768 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI2901 touchscreen controller + +maintainers: + - Jiri Kosina <jkosina@suse.com> + +description: + Supports the Ilitek ILI2901 touchscreen controller. + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + enum: + - ilitek,ili2901 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + + vcc33-supply: true + + vccio-supply: true + +required: + - compatible + - reg + - interrupts + - vcc33-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili2901"; + reg = <0x41>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_ts>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml new file mode 100644 index 000000000..c5d9e0e91 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ili9882t touchscreen controller + +maintainers: + - Cong Yang <yangcong5@huaqin.corp-partner.google.com> + +description: + Supports the Ilitek ili9882t touchscreen controller. + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + const: ilitek,ili9882t + + reg: + const: 0x41 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + description: Reset GPIO. + + vccio-supply: + description: The 1.8V supply to the touchscreen. + +required: + - compatible + - reg + - interrupts + - panel + - vccio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: touchscreen@41 { + compatible = "ilitek,ili9882t"; + reg = <0x41>; + + interrupt-parent = <&pio>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + panel = <&panel>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vccio-supply = <&mt6366_vio18_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/imagis,isa1200.yaml b/Documentation/devicetree/bindings/input/imagis,isa1200.yaml new file mode 100644 index 000000000..4bc8630ed --- /dev/null +++ b/Documentation/devicetree/bindings/input/imagis,isa1200.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/imagis,isa1200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagis ISA1200 haptic motor driver + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + - Linus Walleij <linusw@kernel.org> + +description: + The ISA1200 is a high-performance enhanced haptic motor driver designed + for mobile hand-held devices. It supports various voltages for both ERM + (Eccentric Rotating Mass) and LRA (Linear Resonant Actuator) type + actuators. Thanks to an embedded LDO, battery power can be used directly + in handheld applications. + +properties: + compatible: + const: imagis,isa1200 + + reg: + maxItems: 1 + + control-gpios: + description: + One or two GPIOs flagged as active high linked to HEN and LEN pins + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + pwms: + maxItems: 1 + + vdd-supply: + description: + Regulator for 2.4V - 5.5V power supply + + vddp-supply: + description: + Regulator for 2.4V - 3.6V IO power supply + + imagis,clk-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Divider for the external input clock/PWM + enum: [128, 256, 512, 1024] + default: 128 + + imagis,pll-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Divider for the internal PLL clock + minimum: 1 + maximum: 15 + default: 1 + + imagis,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Defines the motor type isa1200 drives + 0 - LRA (Linear Resonant Actuator) + 1 - ERM (Eccentric Rotating Mass) + enum: [0, 1] + default: 0 + + imagis,period-ns: + description: + Period of the internal PWM channel in nanoseconds. + minimum: 10000 + maximum: 30000 + + imagis,duty-cycle-ns: + description: + Duty cycle of the external/internal PWM channel in nanoseconds, + defaults to 50% of the channel's period + + ldo: + $ref: /schemas/regulator/regulator.yaml# + type: object + description: + Embedded LDO regulator with voltage range 2.3V - 3.8V + unevaluatedProperties: false + + required: + - regulator-min-microvolt + - regulator-max-microvolt + +required: + - compatible + - reg + - ldo + +oneOf: + - required: + - clocks + - imagis,period-ns + - required: + - pwms + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptic-engine@49 { + compatible = "imagis,isa1200"; + reg = <0x49>; + + clocks = <&isa1200_refclk>; + + control-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>, + <&gpio 23 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vdd_3v3_vbat>; + vddp-supply = <&vdd_2v8_vvib>; + + imagis,clk-div = <256>; + imagis,pll-div = <2>; + + imagis,mode = <0>; /* LRA_MODE */ + + imagis,period-ns = <13400>; + imagis,duty-cycle-ns = <100>; + + ldo { + regulator-name = "vdd_vib"; + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <2300000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml new file mode 100644 index 000000000..175256cb1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/imx-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX Keypad Port(KPP) + +maintainers: + - Liu Ying <gnuiyl@gmail.com> + +allOf: + - $ref: /schemas/input/matrix-keymap.yaml# + +description: | + The KPP is designed to interface with a keypad matrix with 2-point contact + or 3-point contact keys. The KPP is designed to simplify the software task + of scanning a keypad matrix. The KPP is capable of detecting, debouncing, + and decoding one or multiple keys pressed simultaneously on a keypad. + +properties: + compatible: + oneOf: + - const: fsl,imx21-kpp + - items: + - enum: + - fsl,imx25-kpp + - fsl,imx27-kpp + - fsl,imx31-kpp + - fsl,imx35-kpp + - fsl,imx51-kpp + - fsl,imx53-kpp + - fsl,imx50-kpp + - fsl,imx6q-kpp + - fsl,imx6sx-kpp + - fsl,imx6sl-kpp + - fsl,imx6sll-kpp + - fsl,imx6ul-kpp + - fsl,imx7d-kpp + - const: fsl,imx21-kpp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + keypad@73f94000 { + compatible = "fsl,imx51-kpp", "fsl,imx21-kpp"; + reg = <0x73f94000 0x4000>; + interrupts = <60>; + clocks = <&clks 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp_1>; + linux,keymap = <0x00000067 /* KEY_UP */ + 0x0001006c /* KEY_DOWN */ + 0x00020072 /* KEY_VOLUMEDOWN */ + 0x00030066 /* KEY_HOME */ + 0x0100006a /* KEY_RIGHT */ + 0x01010069 /* KEY_LEFT */ + 0x0102001c /* KEY_ENTER */ + 0x01030073 /* KEY_VOLUMEUP */ + 0x02000040 /* KEY_F6 */ + 0x02010042 /* KEY_F8 */ + 0x02020043 /* KEY_F9 */ + 0x02030044 /* KEY_F10 */ + 0x0300003b /* KEY_F1 */ + 0x0301003c /* KEY_F2 */ + 0x0302003d /* KEY_F3 */ + 0x03030074>; /* KEY_POWER */ + }; diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt new file mode 100644 index 000000000..1ca6cc5eb --- /dev/null +++ b/Documentation/devicetree/bindings/input/input-reset.txt @@ -0,0 +1,33 @@ +Input: sysrq reset sequence + +A simple binding to represent a set of keys as described in +include/uapi/linux/input.h. This is to communicate a sequence of keys to the +sysrq driver. Upon holding the keys for a specified amount of time (if +specified) the system is sync'ed and reset. + +Key sequences are global to the system but all the keys in a set must be coming +from the same input device. + +The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define +a set of keys. + +Required property: +keyset: array of Linux keycodes, one keycode per cell. + +Optional property: +timeout-ms: duration keys must be pressed together in milliseconds before +generating a sysrq. If omitted the system is rebooted immediately when a valid +sequence has been recognized. + +Example: + + chosen { + linux,sysrq-reset-seq { + keyset = <0x03 + 0x04 + 0x0a>; + timeout-ms = <3000>; + }; + }; + +Would represent KEY_2, KEY_3 and KEY_9. diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml new file mode 100644 index 000000000..64d1c46cb --- /dev/null +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/input.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Input Devices Common Properties + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +properties: + autorepeat: + description: Enable autorepeat when key is pressed and held down. + type: boolean + + debounce-delay-ms: + description: + Debounce delay in milliseconds. This is the time during which the key + press or release signal must remain stable before it is considered valid. + minimum: 0 + maximum: 999 + default: 0 + + linux,keycodes: + description: + Specifies an array of numeric keycode values to be used for reporting + button presses. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0x2ff + + linux,code: + description: + Specifies a single numeric keycode value to be used for reporting + button/switch events. Specify KEY_RESERVED (0) to opt out of event + reporting. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0x2ff + + linux,input-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # EV_KEY + - 2 # EV_REL + - 3 # EV_ABS + - 5 # EV_SW + description: + Specifies whether the event is to be interpreted as a key, relative, + absolute, or switch. + + poll-interval: + description: Poll interval time in milliseconds. + $ref: /schemas/types.yaml#/definitions/uint32 + + power-off-time-sec: + description: + Duration in seconds which the key should be kept pressed for device to + power off automatically. Device with key pressed shutdown feature can + specify this property. + + reset-time-sec: + description: + Duration in seconds which the key should be kept pressed for device to + reset automatically. Device with key pressed reset feature can specify + this property. + + settling-time-us: + description: + Delay, in microseconds, when activating an output line/col/row before + we can reliably read other input lines that maybe affected by this + output. This can be the case for an output with a RC circuit that affects + ramp-up/down times. + default: 0 + +dependencies: + linux,input-type: [ "linux,code" ] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml new file mode 100644 index 000000000..2c3f693b8 --- /dev/null +++ b/Documentation/devicetree/bindings/input/iqs269a.yaml @@ -0,0 +1,648 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs269a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS269A Capacitive Touch Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +allOf: + - $ref: input.yaml# + +description: | + The Azoteq IQS269A is an 8-channel capacitive touch controller that features + additional Hall-effect and inductive sensing capabilities. + + Link to datasheet: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs269a + - azoteq,iqs269a-00 + - azoteq,iqs269a-d0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + azoteq,hall-enable: + type: boolean + description: + Enables Hall-effect sensing on channels 6 and 7. In this case, keycodes + assigned to channel 6 are ignored and keycodes assigned to channel 7 are + interpreted as switch codes. Refer to the datasheet for requirements im- + posed on channels 6 and 7 by Hall-effect sensing. + + azoteq,suspend-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the power mode during suspend as follows: + 0: Automatic (same as normal runtime, i.e. suspend/resume disabled) + 1: Low power (all sensing at a reduced reporting rate) + 2: Ultra-low power (channel 0 proximity sensing) + 3: Halt (no sensing) + + azoteq,clk-div: + type: boolean + description: Divides the device's core clock by a factor of 4. + + azoteq,ulp-update: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 3 + description: Specifies the ultra-low-power mode update rate. + + azoteq,reseed-offset: + type: boolean + description: + Applies an 8-count offset to all long-term averages upon either ATI or + reseed events. + + azoteq,filt-str-lp-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during low-power mode. + + azoteq,filt-str-lp-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during low-power mode. + + azoteq,filt-str-np-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during normal-power mode. + + azoteq,filt-str-np-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during normal-power mode. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 255 + default: 16 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 255 + default: 160 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,rate-ulp-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 160 + description: Specifies the report rate (in ms) during ultra-low-power mode. + + azoteq,timeout-pwr-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 2560 + description: + Specifies the length of time (in ms) to wait for an event during normal- + power mode before transitioning to low-power mode. + + azoteq,timeout-lta-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 32768 + description: + Specifies the length of time (in ms) to wait before resetting the long- + term average of all channels. Specify the maximum timeout to disable it + altogether. + + azoteq,ati-band-disable: + type: boolean + description: Disables the ATI band check. + + azoteq,ati-lp-only: + type: boolean + description: Limits automatic ATI to low-power mode. + + azoteq,ati-band-tighten: + type: boolean + description: Tightens the ATI band from 1/8 to 1/16 of the desired target. + + azoteq,filt-disable: + type: boolean + description: Disables all raw count filtering. + + azoteq,gpio3-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 + description: + Selects the channel for which the GPIO3 pin represents touch state. + + azoteq,dual-direction: + type: boolean + description: + Specifies that long-term averages are to freeze in the presence of either + increasing or decreasing counts, thereby permitting events to be reported + in either direction. + + azoteq,tx-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the inductive sensing excitation frequency as follows (paren- + thesized numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 16 MHz (4 MHz) + 1: 8 MHz (2 MHz) + 2: 4 MHz (1 MHz) + 3: 2 MHz (500 kHz) + + azoteq,global-cap-increase: + type: boolean + description: Increases the global capacitance adder from 0.5 pF to 1.5 pF. + + azoteq,reseed-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the event(s) that prompt the device to reseed (i.e. reset the + long-term average) of an associated channel as follows: + 0: None + 1: Proximity + 2: Proximity or touch + 3: Proximity, touch or deep touch + + azoteq,tracking-enable: + type: boolean + description: + Enables all associated channels to track their respective reference + channels. + + azoteq,filt-str-slider: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + description: Specifies the slider coordinate filter strength. + + azoteq,touch-hold-ms: + multipleOf: 256 + minimum: 256 + maximum: 65280 + default: 5120 + description: + Specifies the length of time (in ms) for which the channel selected by + 'azoteq,gpio3-select' must be held in a state of touch in order for an + approximately 60-ms pulse to be asserted on the GPIO4 pin. + + linux,keycodes: + minItems: 1 + maxItems: 8 + description: | + Specifies the numeric keycodes associated with each available gesture in + the following order (enter 0 for unused gestures): + 0: Slider 0 tap + 1: Slider 0 hold + 2: Slider 0 positive flick or swipe + 3: Slider 0 negative flick or swipe + 4: Slider 1 tap + 5: Slider 1 hold + 6: Slider 1 positive flick or swipe + 7: Slider 1 negative flick or swipe + + azoteq,gesture-swipe: + type: boolean + description: + Directs the device to interpret axial gestures as a swipe (finger remains + on slider) instead of a flick (finger leaves slider). + + azoteq,timeout-tap-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 400 + description: + Specifies the length of time (in ms) within which a slider touch must be + released in order to be interpreted as a tap. Default and maximum values + as well as step size are reduced by a factor of 4 with device version 2. + + azoteq,timeout-swipe-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 2000 + description: + Specifies the length of time (in ms) within which an axial gesture must be + completed in order to be interpreted as a flick or swipe. Default and max- + imum values as well as step size are reduced by a factor of 4 with device + version 2. + + azoteq,thresh-swipe: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 128 + description: + Specifies the number of points across which an axial gesture must travel + in order to be interpreted as a flick or swipe. + +dependencies: + azoteq,gesture-swipe: ["linux,keycodes"] + azoteq,timeout-tap-ms: ["linux,keycodes"] + azoteq,timeout-swipe-ms: ["linux,keycodes"] + azoteq,thresh-swipe: ["linux,keycodes"] + +patternProperties: + "^channel@[0-7]$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + properties: + reg: + minimum: 0 + maximum: 7 + description: Index of the channel. + + azoteq,reseed-disable: + type: boolean + description: + Prevents the channel from being reseeded if the long-term average + timeout (defined in 'azoteq,timeout-lta') expires. + + azoteq,blocking-enable: + type: boolean + description: Specifies that the channel is a blocking channel. + + azoteq,slider0-select: + type: boolean + description: Specifies that the channel participates in slider 0. + + azoteq,slider1-select: + type: boolean + description: Specifies that the channel participates in slider 1. + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the CRX pin(s) associated with the channel. By default, only + the CRX pin corresponding to the channel's index is enabled (e.g. CRX0 + for channel 0). + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + default: [0, 1, 2, 3, 4, 5, 6, 7] + description: Specifies the TX pin(s) associated with the channel. + + azoteq,meas-cap-decrease: + type: boolean + description: + Decreases the internal measurement capacitance from 60 pF to 15 pF. + + azoteq,rx-float-inactive: + type: boolean + description: Floats any inactive CRX pins instead of grounding them. + + azoteq,local-cap-size: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + description: | + Specifies the capacitance to be added to the channel as follows: + 0: None + 1: Global adder (based on 'azoteq,global-cap-increase') + 2: Global adder + 0.5 pF + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity, touch and + deep-touch events relative to their respective thresholds. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 2 + description: | + Specifies the bias current applied during projected-capacitance + sensing as follows: + 0: 2.5 uA + 1: 5 uA + 2: 10 uA + 3: 20 uA + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 9, 14, 15] + default: 0 + description: | + Specifies the channel's sensing mode as follows: + 0: Self capacitance + 1: Projected capacitance + 9: Self or mutual inductance + 14: Hall effect + 15: Temperature + + azoteq,sense-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + description: | + Specifies the channel's sensing frequency as follows (parenthesized + numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 4 MHz (1 MHz) + 1: 2 MHz (500 kHz) + 2: 1 MHz (250 kHz) + 3: 500 kHz (125 kHz) + + azoteq,static-enable: + type: boolean + description: Enables the static front-end for the channel. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Semi-partial + 2: Partial + 3: Full + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [75, 100, 150, 200] + default: 100 + description: Specifies the channel's ATI base. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + default: 512 + description: Specifies the channel's ATI target. + + azoteq,assoc-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the associated channels for which the channel serves as a + reference channel. By default, no channels are selected. + + azoteq,assoc-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: + Specifies the channel's impact weight if it acts as an associated + channel (0 = 0% impact, 255 = 200% impact). + + patternProperties: + "^event-prox(-alt)?$": + type: object + $ref: input.yaml# + description: + Represents a proximity event reported by the channel in response to + a decrease in counts. Node names suffixed with '-alt' instead corre- + spond to an increase in counts. + + By default, the long-term average tracks an increase in counts such + that only events corresponding to a decrease in counts are reported + (refer to the datasheet for more information). + + Specify 'azoteq,dual-direction' to freeze the long-term average when + the counts increase or decrease such that events of either direction + can be reported. Alternatively, specify 'azoteq,invert-enable' to in- + vert the polarity of the states reported by the channel. + + Complementary events (e.g. event-touch and event-touch-alt) can both + be present and specify different key or switch codes, but not differ- + ent thresholds or hysteresis (if applicable). + + properties: + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 10 + description: Specifies the threshold for the event. + + linux,code: true + + additionalProperties: false + + "^event-touch(-alt)?$": + type: object + $ref: input.yaml# + description: Represents a touch event reported by the channel. + + properties: + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 8 + description: Specifies the threshold for the event. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 4 + description: Specifies the hysteresis for the event. + + linux,code: true + + additionalProperties: false + + "^event-deep(-alt)?$": + type: object + $ref: input.yaml# + description: Represents a deep-touch event reported by the channel. + + properties: + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 26 + description: Specifies the threshold for the event. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + description: Specifies the hysteresis for the event. + + linux,code: true + + additionalProperties: false + + required: + - reg + + additionalProperties: false + +if: + properties: + compatible: + contains: + enum: + - azoteq,iqs269a-d0 +then: + patternProperties: + "^channel@[0-7]$": + properties: + azoteq,slider1-select: false +else: + properties: + azoteq,touch-hold-ms: false + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touch@44 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "azoteq,iqs269a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + azoteq,hall-enable; + azoteq,suspend-mode = <2>; + + linux,keycodes = <KEY_PLAYPAUSE>, + <KEY_STOPCD>, + <KEY_NEXTSONG>, + <KEY_PREVIOUSSONG>; + + azoteq,timeout-tap-ms = <400>; + azoteq,timeout-swipe-ms = <800>; + + channel@0 { + reg = <0x0>; + + event-prox { + linux,code = <KEY_POWER>; + }; + }; + + channel@1 { + reg = <0x1>; + azoteq,slider0-select; + }; + + channel@2 { + reg = <0x2>; + azoteq,slider0-select; + }; + + channel@3 { + reg = <0x3>; + azoteq,slider0-select; + }; + + channel@4 { + reg = <0x4>; + azoteq,slider0-select; + }; + + channel@5 { + reg = <0x5>; + azoteq,slider0-select; + }; + + channel@6 { + reg = <0x6>; + azoteq,invert-enable; + azoteq,static-enable; + azoteq,reseed-disable; + azoteq,rx-enable = <0>; + azoteq,sense-freq = <0x0>; + azoteq,sense-mode = <0xE>; + azoteq,ati-mode = <0x0>; + azoteq,ati-base = <200>; + azoteq,ati-target = <320>; + }; + + channel@7 { + reg = <0x7>; + azoteq,invert-enable; + azoteq,static-enable; + azoteq,reseed-disable; + azoteq,rx-enable = <0>, <6>; + azoteq,sense-freq = <0x0>; + azoteq,sense-mode = <0xE>; + azoteq,ati-mode = <0x3>; + azoteq,ati-base = <200>; + azoteq,ati-target = <320>; + + event-touch { + linux,code = <SW_LID>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml new file mode 100644 index 000000000..e424d67b0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/iqs626a.yaml @@ -0,0 +1,878 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs626a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS626A Capacitive Touch Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS626A is a 14-channel capacitive touch controller that features + additional Hall-effect and inductive sensing capabilities. + + Link to datasheet: https://www.azoteq.com/ + +allOf: + - $ref: touchscreen/touchscreen.yaml# + +properties: + compatible: + const: azoteq,iqs626a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + azoteq,suspend-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the power mode during suspend as follows: + 0: Automatic (same as normal runtime, i.e. suspend/resume disabled) + 1: Low power (all sensing at a reduced reporting rate) + 2: Ultra-low power (ULP channel proximity sensing) + 3: Halt (no sensing) + + azoteq,clk-div: + type: boolean + description: Divides the device's core clock by a factor of 4. + + azoteq,ulp-enable: + type: boolean + description: + Permits the device to automatically enter ultra-low-power mode from low- + power mode. + + azoteq,ulp-update: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 3 + description: | + Specifies the rate at which the trackpad, generic and Hall channels are + updated during ultra-low-power mode as follows: + 0: 8 + 1: 13 + 2: 28 + 3: 54 + 4: 89 + 5: 135 + 6: 190 + 7: 256 + + azoteq,ati-band-disable: + type: boolean + description: Disables the ATI band check. + + azoteq,ati-lp-only: + type: boolean + description: Limits automatic ATI to low-power mode. + + azoteq,gpio3-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 1 + description: | + Selects the channel or group of channels for which the GPIO3 pin + represents touch state as follows: + 0: None + 1: ULP channel + 2: Trackpad + 3: Trackpad + 4: Generic channel 0 + 5: Generic channel 1 + 6: Generic channel 2 + 7: Hall channel + + azoteq,reseed-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the event(s) that prompt the device to reseed (i.e. reset the + long-term average) of an associated channel as follows: + 0: None + 1: Proximity + 2: Proximity or touch + 3: Proximity, touch or deep touch + + azoteq,thresh-extend: + type: boolean + description: Multiplies all touch and deep-touch thresholds by 4. + + azoteq,tracking-enable: + type: boolean + description: + Enables all associated channels to track their respective reference + channels. + + azoteq,reseed-offset: + type: boolean + description: + Applies an 8-count offset to all long-term averages upon either ATI or + reseed events. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 255 + default: 150 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 255 + default: 150 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,rate-ulp-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: Specifies the report rate (in ms) during ultra-low-power mode. + + azoteq,timeout-pwr-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 2560 + description: + Specifies the length of time (in ms) to wait for an event before moving + from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is + present) from low-power mode to ultra-low-power mode. + + azoteq,timeout-lta-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 40960 + description: + Specifies the length of time (in ms) to wait before resetting the long- + term average of all channels. Specify the maximum timeout to disable it + altogether. + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +patternProperties: + "^ulp-0|generic-[0-2]|hall$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + properties: + azoteq,ati-exclude: + type: boolean + description: + Prevents the channel from participating in an ATI event that is + manually triggered during initialization. + + azoteq,reseed-disable: + type: boolean + description: + Prevents the channel from being reseeded if the long-term average + timeout (defined in 'azoteq,timeout-lta') expires. + + azoteq,meas-cap-decrease: + type: boolean + description: + Decreases the internal measurement capacitance from 60 pF to 15 pF. + + azoteq,rx-inactive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + description: | + Specifies how inactive CRX pins are to be terminated as follows: + 0: VSS + 1: Floating + 2: VREG (generic channels only) + + azoteq,linearize: + type: boolean + description: + Enables linearization of the channel's counts (generic and Hall + channels) or inverts the polarity of the channel's proximity or + touch states (ULP channel). + + azoteq,dual-direction: + type: boolean + description: + Specifies that the channel's long-term average is to freeze in the + presence of either increasing or decreasing counts, thereby permit- + ting events to be reported in either direction. + + azoteq,filt-disable: + type: boolean + description: Disables raw count filtering for the channel. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Semi-partial + 2: Partial + 3: Full + + The default value is a function of the channel and the device's reset + user interface (RUI); reference the datasheet for further information + about the available RUI options. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [75, 100, 150, 200] + description: + Specifies the channel's ATI base. The default value is a function + of the channel and the device's RUI. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + description: + Specifies the channel's ATI target. The default value is a function + of the channel and the device's RUI. + + azoteq,cct-increase: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 16 + default: 0 + description: + Specifies the degree to which the channel's charge cycle time is to + be increased, with 0 representing no increase. The maximum value is + limited to 4 in the case of the ULP channel, and the property is un- + available entirely in the case of the Hall channel. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the bias current applied during projected-capacitance + sensing as follows: + 0: 2.5 uA + 1: 5 uA + 2: 10 uA + 3: 20 uA + + This property is unavailable in the case of the Hall channel. + + azoteq,sense-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's sensing frequency as follows (parenthesized + numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 4 MHz (1 MHz) + 1: 2 MHz (500 kHz) + 2: 1 MHz (250 kHz) + 3: 500 kHz (125 kHz) + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,ati-band-tighten: + type: boolean + description: + Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and + generic channels only). + + azoteq,proj-enable: + type: boolean + description: Enables projected-capacitance sensing (ULP channel only). + + azoteq,filt-str-np-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during normal-power mode (ULP + and generic channels only). + + azoteq,filt-str-lp-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during low-power mode (ULP and + generic channels only). + + azoteq,filt-str-np-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during normal-power + mode (ULP and generic channels only). + + azoteq,filt-str-lp-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during low-power mode + (ULP and generic channels only). + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the CRX pin(s) associated with the channel. + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the TX pin(s) associated with the channel. + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,local-cap-size: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4] + default: 0 + description: | + Specifies the capacitance to be added to the channel as follows: + 0: 0 pF + 1: 0.5 pF + 2: 1.0 pF + 3: 1.5 pF + 4: 2.0 pF + + This property is unavailable in the case of the ULP or Hall channels. + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 8, 9, 12, 14, 15] + description: | + Specifies the channel's sensing mode as follows: + 0: Self capacitance + 1: Projected capacitance + 8: Self inductance + 9: Mutual inductance + 12: External + 14: Hall effect + 15: Temperature + + This property is unavailable in the case of the ULP or Hall channels. + The default value is a function of the channel and the device's RUI. + + azoteq,tx-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the inductive sensing excitation frequency as follows + (parenthesized numbers represent the frequency if 'azoteq,clk-div' + is present): + 0: 16 MHz (4 MHz) + 1: 8 MHz (2 MHz) + 2: 4 MHz (1 MHz) + 3: 2 MHz (500 kHz) + + This property is unavailable in the case of the ULP or Hall channels. + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity, touch and + deep-touch events relative to their respective thresholds (generic + channels only). + + azoteq,comp-disable: + type: boolean + description: + Disables compensation for the channel (generic channels only). + + azoteq,static-enable: + type: boolean + description: + Enables the static front-end for the channel (generic channels only). + + azoteq,assoc-select: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + maxItems: 6 + items: + enum: + - ulp-0 + - trackpad-3x2 + - trackpad-3x3 + - generic-0 + - generic-1 + - generic-2 + - hall + description: + Specifies the associated channels for which the channel serves as a + reference channel. By default, no channels are selected. This prop- + erty is only available for the generic channels. + + azoteq,assoc-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: + Specifies the channel's impact weight if it acts as an associated + channel (0 = 0% impact, 255 = 200% impact). This property is only + available for the generic channels. + + patternProperties: + "^event-(prox|touch|deep)(-alt)?$": + type: object + $ref: input.yaml# + description: + Represents a proximity, touch or deep-touch event reported by the + channel in response to a decrease in counts. Node names suffixed with + '-alt' instead correspond to an increase in counts. + + By default, the long-term average tracks an increase in counts such + that only events corresponding to a decrease in counts are reported + (refer to the datasheet for more information). + + Specify 'azoteq,dual-direction' to freeze the long-term average when + the counts increase or decrease such that events of either direction + can be reported. Alternatively, specify 'azoteq,invert-enable' to in- + vert the polarity of the states reported by the channel. + + Complementary events (e.g. event-touch and event-touch-alt) can both + be present and specify different key or switch codes, but not differ- + ent thresholds or hysteresis (if applicable). + + Proximity events are unavailable in the case of the Hall channel, and + deep-touch events are only available for the generic channels. Unless + otherwise specified, default values are a function of the channel and + the device's RUI. + + properties: + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the threshold for the event. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the hysteresis for the event (touch and deep-touch + events only). + + linux,code: true + + linux,input-type: + enum: [1, 5] + description: + Specifies whether the event is to be interpreted as a key (1) or + a switch (5). By default, Hall-channel events are interpreted as + switches and all others are interpreted as keys. + + additionalProperties: false + + dependencies: + azoteq,assoc-weight: ["azoteq,assoc-select"] + + additionalProperties: false + + "^trackpad-3x[2-3]$": + type: object + $ref: input.yaml# + description: + Represents all channels associated with the trackpad. The channels are + collectively active if the trackpad is defined and inactive otherwise. + + properties: + azoteq,ati-exclude: + type: boolean + description: + Prevents the trackpad channels from participating in an ATI event + that is manually triggered during initialization. + + azoteq,reseed-disable: + type: boolean + description: + Prevents the trackpad channels from being reseeded if the long-term + average timeout (defined in 'azoteq,timeout-lta') expires. + + azoteq,meas-cap-decrease: + type: boolean + description: + Decreases the internal measurement capacitance from 60 pF to 15 pF. + + azoteq,rx-inactive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + description: | + Specifies how inactive CRX pins are to be terminated as follows: + 0: VSS + 1: Floating + + azoteq,linearize: + type: boolean + description: Inverts the polarity of the trackpad's touch state. + + azoteq,dual-direction: + type: boolean + description: + Specifies that the trackpad's long-term averages are to freeze in + the presence of either increasing or decreasing counts, thereby + permitting events to be reported in either direction. + + azoteq,filt-disable: + type: boolean + description: Disables raw count filtering for the trackpad channels. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the trackpad's ATI mode as follows: + 0: Disabled + 1: Semi-partial + 2: Partial + 3: Full + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + default: 0 + description: Specifies the trackpad's ATI target. + + azoteq,cct-increase: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + default: 0 + description: + Specifies the degree to which the trackpad's charge cycle time is to + be increased, with 0 representing no increase. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the bias current applied during projected-capacitance + sensing as follows: + 0: 2.5 uA + 1: 5 uA + 2: 10 uA + 3: 20 uA + + azoteq,sense-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the trackpad's sensing frequency as follows (parenthesized + numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 4 MHz (1 MHz) + 1: 2 MHz (500 kHz) + 2: 1 MHz (250 kHz) + 3: 500 kHz (125 kHz) + + azoteq,ati-band-tighten: + type: boolean + description: + Tightens the ATI band from 1/8 to 1/16 of the desired target. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + description: Specifies the trackpad's touch hysteresis. + + azoteq,lta-update: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + Specifies the update rate of the trackpad's long-term average during + ultra-low-power mode as follows: + 0: 2 + 1: 4 + 2: 8 + 3: 16 + 4: 32 + 5: 64 + 6: 128 + 7: 255 + + azoteq,filt-str-trackpad: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: Specifies the trackpad coordinate filter strength. + + azoteq,filt-str-np-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during normal-power mode. + + azoteq,filt-str-lp-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during low-power mode. + + linux,keycodes: + minItems: 1 + maxItems: 6 + description: | + Specifies the numeric keycodes associated with each available gesture + in the following order (enter 0 for unused gestures): + 0: Positive flick or swipe in X direction + 1: Negative flick or swipe in X direction + 2: Positive flick or swipe in Y direction + 3: Negative flick or swipe in Y direction + 4: Tap + 5: Hold + + azoteq,gesture-swipe: + type: boolean + description: + Directs the device to interpret axial gestures as a swipe (finger + remains on trackpad) instead of a flick (finger leaves trackpad). + + azoteq,timeout-tap-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: + Specifies the length of time (in ms) within which a trackpad touch + must be released in order to be interpreted as a tap. + + azoteq,timeout-swipe-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: + Specifies the length of time (in ms) within which an axial gesture + must be completed in order to be interpreted as a flick or swipe. + + azoteq,thresh-swipe: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: + Specifies the number of points across which an axial gesture must + travel in order to be interpreted as a flick or swipe. + + patternProperties: + "^channel-[0-8]$": + type: object + description: Represents a single trackpad channel. + + properties: + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: Specifies the threshold for the channel. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 45 + maximum: 300 + default: 45 + description: Specifies the channel's ATI base. + + additionalProperties: false + + dependencies: + azoteq,gesture-swipe: ["linux,keycodes"] + azoteq,timeout-tap-ms: ["linux,keycodes"] + azoteq,timeout-swipe-ms: ["linux,keycodes"] + azoteq,thresh-swipe: ["linux,keycodes"] + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touch@44 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "azoteq,iqs626a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + azoteq,rate-np-ms = <16>; + azoteq,rate-lp-ms = <160>; + + azoteq,timeout-pwr-ms = <2560>; + azoteq,timeout-lta-ms = <32768>; + + ulp-0 { + azoteq,meas-cap-decrease; + + azoteq,ati-base = <75>; + azoteq,ati-target = <1024>; + + azoteq,rx-enable = <2>, <3>, <4>, + <5>, <6>, <7>; + + event-prox { + linux,code = <KEY_POWER>; + }; + }; + + trackpad-3x3 { + azoteq,filt-str-np-cnt = <1>; + azoteq,filt-str-lp-cnt = <1>; + + azoteq,hyst = <4>; + + azoteq,ati-mode = <3>; + azoteq,ati-target = <512>; + + azoteq,proj-bias = <1>; + azoteq,sense-freq = <2>; + + linux,keycodes = <KEY_VOLUMEUP>, + <KEY_VOLUMEDOWN>, + <KEY_NEXTSONG>, + <KEY_PREVIOUSSONG>, + <KEY_PLAYPAUSE>, + <KEY_STOPCD>; + + azoteq,gesture-swipe; + azoteq,timeout-swipe-ms = <800>; + azoteq,timeout-tap-ms = <400>; + azoteq,thresh-swipe = <40>; + + channel-0 { + azoteq,thresh = <35>; + azoteq,ati-base = <195>; + }; + + channel-1 { + azoteq,thresh = <40>; + azoteq,ati-base = <195>; + }; + + channel-2 { + azoteq,thresh = <40>; + azoteq,ati-base = <195>; + }; + + channel-3 { + azoteq,thresh = <38>; + azoteq,ati-base = <195>; + }; + + channel-4 { + azoteq,thresh = <33>; + azoteq,ati-base = <195>; + }; + + channel-5 { + azoteq,thresh = <38>; + azoteq,ati-base = <195>; + }; + + channel-6 { + azoteq,thresh = <35>; + azoteq,ati-base = <195>; + }; + + channel-7 { + azoteq,thresh = <35>; + azoteq,ati-base = <195>; + }; + + channel-8 { + azoteq,thresh = <35>; + azoteq,ati-base = <195>; + }; + }; + + /* + * Preserve the default register settings for + * the temperature-tracking channel leveraged + * by reset user interface (RUI) 1. + * + * Scalar properties (e.g. ATI mode) are left + * untouched by simply omitting them; boolean + * properties must be specified explicitly as + * needed. + */ + generic-2 { + azoteq,reseed-disable; + azoteq,meas-cap-decrease; + azoteq,dual-direction; + azoteq,comp-disable; + azoteq,static-enable; + }; + + hall { + azoteq,reseed-disable; + azoteq,meas-cap-decrease; + + event-touch { + linux,code = <SW_LID>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml new file mode 100644 index 000000000..0aa951f0a --- /dev/null +++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS620A/621/622/624/625 Keys and Switches + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +allOf: + - $ref: input.yaml# + +description: | + The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors + feature a variety of self-capacitive, mutual-inductive and Hall-effect sens- + ing capabilities that can facilitate a variety of contactless key and switch + applications. + + These functions are collectively represented by a "keys" child node from the + parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for + further details and examples. Sensor hardware configuration (self-capacitive + vs. mutual-inductive, etc.) is selected based on the device's firmware. + +properties: + compatible: + enum: + - azoteq,iqs620a-keys + - azoteq,iqs621-keys + - azoteq,iqs622-keys + - azoteq,iqs624-keys + - azoteq,iqs625-keys + + linux,keycodes: + minItems: 1 + maxItems: 16 + description: | + Specifies the numeric keycodes associated with each available touch or + proximity event according to the following table. An 'x' indicates the + event is supported for a given device. Specify 0 for unused events. + + ------------------------------------------------------------------------- + | # | Event | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 | + ------------------------------------------------------------------------- + | 0 | CH0 Touch | x | x | x | x | x | + | | Antenna 1 Touch* | x | | | | | + ------------------------------------------------------------------------- + | 1 | CH0 Proximity | x | x | x | x | x | + | | Antenna 1 Prox.* | x | | | | | + ------------------------------------------------------------------------- + | 2 | CH1 Touch | x | x | x | x | x | + | | Ant. 1 Deep Touch* | x | | | | | + ------------------------------------------------------------------------- + | 3 | CH1 Proximity | x | x | x | x | x | + ------------------------------------------------------------------------- + | 4 | CH2 Touch | x | | | | | + ------------------------------------------------------------------------- + | 5 | CH2 Proximity | x | | | | | + | | Antenna 2 Prox.* | x | | | | | + ------------------------------------------------------------------------- + | 6 | Metal (+) Touch** | x | x | | | | + | | Ant. 2 Deep Touch* | x | | | | | + ------------------------------------------------------------------------- + | 7 | Metal (+) Prox.** | x | x | | | | + | | Antenna 2 Touch* | x | | | | | + ------------------------------------------------------------------------- + | 8 | Metal (-) Touch** | x | x | | | | + ------------------------------------------------------------------------- + | 9 | Metal (-) Prox.** | x | x | | | | + ------------------------------------------------------------------------- + | 10 | SAR Active*** | x | | x | | | + ------------------------------------------------------------------------- + | 11 | SAR Quick Rel.*** | x | | x | | | + ------------------------------------------------------------------------- + | 12 | SAR Movement*** | x | | x | | | + ------------------------------------------------------------------------- + | 13 | SAR Filter Halt*** | x | | x | | | + ------------------------------------------------------------------------- + | 14 | Wheel Up | | | | x | | + ------------------------------------------------------------------------- + | 15 | Wheel Down | | | | x | | + ------------------------------------------------------------------------- + * Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events + if enabled via firmware. + ** "+" and "-" refer to the polarity of a channel's delta (LTA - counts), + where "LTA" is defined as the channel's long-term average. + *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled + via firmware. + +patternProperties: + "^hall-switch-(north|south)$": + type: object + $ref: input.yaml# + description: + Represents north/south-field Hall-effect sensor touch or proximity + events. Note that north/south-field orientation is reversed on the + IQS620AXzCSR device due to its flip-chip package. + + properties: + linux,code: true + + azoteq,use-prox: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, specifies that Hall-effect sensor reporting should + use the device's wide-range proximity threshold instead of its + close-range touch threshold (default). + + required: + - linux,code + + additionalProperties: false + +if: + properties: + compatible: + contains: + enum: + - azoteq,iqs624-keys + - azoteq,iqs625-keys +then: + patternProperties: + "^hall-switch-(north|south)$": false + +required: + - compatible + - linux,keycodes + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.txt b/Documentation/devicetree/bindings/input/matrix-keymap.txt new file mode 100644 index 000000000..79f6d01ae --- /dev/null +++ b/Documentation/devicetree/bindings/input/matrix-keymap.txt @@ -0,0 +1 @@ +This file has been moved to matrix-keymap.yaml diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml new file mode 100644 index 000000000..ce910e4ac --- /dev/null +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/matrix-keymap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Key Matrices on Matrix-connected Keyboards + +maintainers: + - Olof Johansson <olof@lixom.net> + +description: | + A simple common binding for matrix-connected keyboards. Currently targeted at + defining the keys in the scope of linux key codes since that is a stable and + standardized interface at this time. + + Some users of this binding might choose to specify secondary keymaps for + cases where there is a modifier key such as a Fn key. Proposed names + for said properties are "linux,fn-keymap" or with another descriptive + word for the modifier other from "Fn". + +properties: + linux,keymap: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of packed 1-cell entries containing the equivalent of row, + column and linux key-code. The 32-bit big endian cell is packed as: + row << 24 | column << 16 | key-code + + keypad,num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of row lines connected to the keypad controller. + + keypad,num-columns: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of column lines connected to the keypad controller. + +additionalProperties: true + +examples: + - | + keypad { + /* ... */ + linux,keymap = < 0x00030012 + 0x0102003a >; + keypad,num-rows = <2>; + keypad,num-columns = <8>; + }; diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml new file mode 100644 index 000000000..48edc0c8c --- /dev/null +++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/max77650-onkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Onkey driver for MAX77650 PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + +description: | + This module is part of the MAX77650 MFD device. For more details + see Documentation/devicetree/bindings/mfd/max77650.yaml. + + The onkey controller is represented as a sub-node of the PMIC node on + the device tree. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: maxim,max77650-onkey + + linux,code: + default: 116 # KEY_POWER + + maxim,onkey-slide: + $ref: /schemas/types.yaml#/definitions/flag + description: + The system's button is a slide switch, not the default push button. + +required: + - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml new file mode 100644 index 000000000..914dd3283 --- /dev/null +++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/mediatek,mt6779-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek's Keypad Controller + +maintainers: + - Mattijs Korpershoek <mkorpershoek@kernel.org> + +allOf: + - $ref: input.yaml# + - $ref: /schemas/input/matrix-keymap.yaml# + +description: | + Mediatek's Keypad controller is used to interface a SoC with a matrix-type + keypad device. The keypad controller supports multiple row and column lines. + A key can be placed at each intersection of a unique row and a unique column. + The keypad controller can sense a key-press and key-release and report the + event using a interrupt to the cpu. + +properties: + compatible: + oneOf: + - const: mediatek,mt6779-keypad + - items: + - enum: + - mediatek,mt6873-keypad + - mediatek,mt8183-keypad + - mediatek,mt8365-keypad + - mediatek,mt8516-keypad + - const: mediatek,mt6779-keypad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: kpd + + wakeup-source: + description: use any event on keypad as wakeup event + type: boolean + + debounce-delay-ms: + maximum: 256 + default: 16 + + mediatek,keys-per-group: + description: each (row, column) group has multiple keys + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + maximum: 2 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + keyboard@10010000 { + compatible = "mediatek,mt6779-keypad"; + reg = <0 0x10010000 0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk26m>; + clock-names = "kpd"; + }; + }; diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml new file mode 100644 index 000000000..140a862ec --- /dev/null +++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PMIC Keys + +maintainers: + - Chen Zhong <chen.zhong@mediatek.com> + +allOf: + - $ref: input.yaml# + +description: | + There are two key functions provided by MT6397, MT6323 and other MediaTek + PMICs: pwrkey and homekey. + The key functions are defined as the subnode of the function node provided + by the PMIC that is defined as a Multi-Function Device (MFD). + + For MediaTek MT6323/MT6397 PMIC bindings see + Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6323-keys + - mediatek,mt6328-keys + - mediatek,mt6331-keys + - mediatek,mt6357-keys + - mediatek,mt6358-keys + - mediatek,mt6359-keys + - mediatek,mt6397-keys + - items: + - enum: + - mediatek,mt6365-keys + - const: mediatek,mt6359-keys + + power-off-time-sec: true + + mediatek,long-press-mode: + description: | + Key long-press force shutdown setting + 0 - disabled + 1 - pwrkey + 2 - pwrkey+homekey + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + maximum: 2 + +patternProperties: + "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$": + $ref: input.yaml# + + properties: + interrupts: + minItems: 1 + items: + - description: Key press interrupt + - description: Key release interrupt + + interrupt-names: true + + linux,keycodes: + maxItems: 1 + + wakeup-source: true + + required: + - linux,keycodes + + if: + properties: + interrupt-names: + contains: + const: powerkey + then: + properties: + interrupt-names: + minItems: 1 + items: + - const: powerkey + - const: powerkey_r + else: + properties: + interrupt-names: + minItems: 1 + items: + - const: homekey + - const: homekey_r + + unevaluatedProperties: false + +required: + - compatible + +unevaluatedProperties: false + +... diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml new file mode 100644 index 000000000..983f4701b --- /dev/null +++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml @@ -0,0 +1,308 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/microchip,cap11xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip CAP11xx based capacitive touch sensors + +description: | + The Microchip CAP1xxx Family of RightTouchTM multiple-channel capacitive + touch controllers and LED drivers. The device communication via I2C only. + + For more product information please see the links below: + CAP1106: https://ww1.microchip.com/downloads/en/DeviceDoc/00001624B.pdf + CAP1114: https://ww1.microchip.com/downloads/en/DeviceDoc/00002444A.pdf + CAP1126: https://ww1.microchip.com/downloads/en/DeviceDoc/00001623B.pdf + CAP1188: https://ww1.microchip.com/downloads/en/DeviceDoc/00001620C.pdf + CAP1203: https://ww1.microchip.com/downloads/en/DeviceDoc/00001572B.pdf + CAP1206: https://ww1.microchip.com/downloads/en/DeviceDoc/00001567B.pdf + CAP1293: https://ww1.microchip.com/downloads/en/DeviceDoc/00001566B.pdf + CAP1298: https://ww1.microchip.com/downloads/en/DeviceDoc/00001571B.pdf + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + enum: + - microchip,cap1106 + - microchip,cap1114 + - microchip,cap1126 + - microchip,cap1188 + - microchip,cap1203 + - microchip,cap1206 + - microchip,cap1293 + - microchip,cap1298 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + description: | + Property describing the interrupt line the + device's ALERT#/CM_IRQ# pin is connected to. + The device only has one interrupt source. + + reset-gpios: + description: | + GPIO connected to the active-high RESET pin of the chip; + driving it high asserts reset and deep sleep, while driving + it low releases reset for normal operation. + maxItems: 1 + + autorepeat: + description: | + Enables the Linux input system's autorepeat feature on the input device. + + linux,keycodes: + minItems: 3 + maxItems: 14 + description: | + Specifies an array of numeric keycode values to + be used for the channels. If this property is + omitted, KEY_A, KEY_B, etc are used as defaults. + The number of entries must correspond to the number of channels. + + microchip,sensor-gain: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + enum: [1, 2, 4, 8] + description: | + Defines the gain of the sensor circuitry. This + effectively controls the sensitivity, as a + smaller delta capacitance is required to + generate the same delta count values. + + microchip,irq-active-high: + type: boolean + description: | + By default the interrupt pin is active low + open drain. This property allows using the active + high push-pull output. + + microchip,sensitivity-delta-sense: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + description: + Controls the sensitivity multiplier of a touch detection. + Higher value means more sensitive settings. + At the more sensitive settings, touches are detected for a smaller delta + capacitance corresponding to a "lighter" touch. + + microchip,signal-guard: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + enum: [0, 1] + description: | + 0 - off + 1 - on + The signal guard isolates the signal from virtual grounds. + If enabled then the behavior of the channel is changed to signal guard. + The number of entries must correspond to the number of channels. + + microchip,input-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + minimum: 0 + maximum: 127 + description: + Specifies the delta threshold that is used to determine if a touch has + been detected. A higher value means a larger difference in capacitance + is required for a touch to be registered, making the touch sensor less + sensitive. + The number of entries must correspond to the number of channels. + CAP1114 is an exception where channels 8~14 reuse the eighth entry's + threshold, so counts differ. + + microchip,calib-sensitivity: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 8 + items: + enum: [1, 2, 4] + description: | + Specifies an array of numeric values that controls the gain + used by the calibration routine to enable sensor inputs + to be more sensitive for proximity detection. + Gain is based on touch pad capacitance range + 1 - 5-50pF + 2 - 0-25pF + 4 - 0-12.5pF + The number of entries must correspond to the number of channels. + +patternProperties: + "^led@[0-9a]$": + type: object + description: CAP11xx LEDs + $ref: /schemas/leds/common.yaml# + + properties: + reg: + description: LED channel number + minimum: 0 + maximum: 10 + + label: true + + linux,default-trigger: true + + default-state: true + + required: + - reg + + additionalProperties: false + +allOf: + - $ref: input.yaml + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1106 + - microchip,cap1203 + - microchip,cap1206 + - microchip,cap1293 + - microchip,cap1298 + then: + properties: + reset-gpios: false + + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1114 + then: + properties: + linux,keycodes: + minItems: 14 + else: + properties: + linux,keycodes: + maxItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1106 + - microchip,cap1203 + - microchip,cap1206 + - microchip,cap1293 + - microchip,cap1298 + then: + patternProperties: + "^led@": false + + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1126 + then: + patternProperties: + "^led@": + properties: + reg: + maximum: 1 + + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1188 + then: + patternProperties: + "^led@": + properties: + reg: + maximum: 7 + + - if: + properties: + compatible: + contains: + enum: + - microchip,cap1106 + - microchip,cap1114 + - microchip,cap1126 + - microchip,cap1188 + - microchip,cap1203 + - microchip,cap1206 + then: + properties: + microchip,signal-guard: false + microchip,calib-sensitivity: false + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touch@28 { + compatible = "microchip,cap1188"; + interrupt-parent = <&gpio1>; + interrupts = <0 0>; + reg = <0x28>; + autorepeat; + microchip,sensor-gain = <2>; + microchip,sensitivity-delta-sense = <16>; + microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>; + + linux,keycodes = <103>, /* KEY_UP */ + <106>, /* KEY_RIGHT */ + <108>, /* KEY_DOWN */ + <105>, /* KEY_LEFT */ + <109>, /* KEY_PAGEDOWN */ + <104>; /* KEY_PAGEUP */ + + reset-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + label = "cap11xx:green:usr0"; + reg = <0>; + }; + + led@1 { + label = "cap11xx:green:usr1"; + reg = <1>; + }; + + led@2 { + label = "cap11xx:green:alive"; + reg = <2>; + linux,default-trigger = "heartbeat"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/microchip,qt1050.txt b/Documentation/devicetree/bindings/input/microchip,qt1050.txt new file mode 100644 index 000000000..80e75f962 --- /dev/null +++ b/Documentation/devicetree/bindings/input/microchip,qt1050.txt @@ -0,0 +1,78 @@ +Microchip AT42QT1050 Five-channel Touch Sensor IC + +The AT42QT1050 (QT1050) is a QTouchADC sensor device. The device can sense from +one to five keys, dependent on mode. The QT1050 includes all signal processing +functions necessary to provide stable sensing under a wide variety of changing +conditions, and the outputs are fully debounced. + +The touchkey device node should be placed inside an I2C bus node. + +Required properties: +- compatible: Must be "microchip,qt1050" +- reg: The I2C address of the device +- interrupts: The sink for the touchpad's IRQ output, + see ../interrupt-controller/interrupts.txt + +Optional properties: +- wakeup-source: touch keys can be used as a wakeup source + +Each button (key) is represented as a sub-node: + +Each not specified key or key with linux,code set to KEY_RESERVED gets disabled +in HW. + +Subnode properties: +- linux,code: Keycode to emit. +- reg: The key number. Valid values: 0, 1, 2, 3, 4. + +Optional subnode-properties: + +If a optional property is missing or has a invalid value the default value is +taken. + +- microchip,pre-charge-time-ns: + Each touchpad need some time to precharge. The value depends on the mechanical + layout. + Valid value range: 0 - 637500; values must be a multiple of 2500; + default is 0. +- microchip,average-samples: + Number of data samples which are averaged for each read. + Valid values: 1, 4, 16, 64, 256, 1024, 4096, 16384; default is 1. +- microchip,average-scaling: + The scaling factor which is used to scale the average-samples. + Valid values: 1, 2, 4, 8, 16, 32, 64, 128; default is 1. +- microchip,threshold: + Number of counts to register a touch detection. + Valid value range: 0 - 255; default is 20. + +Example: +QT1050 with 3 non continuous keys, key2 and key4 are disabled. + +touchkeys@41 { + compatible = "microchip,qt1050"; + reg = <0x41>; + interrupt-parent = <&gpio0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + + up@0 { + reg = <0>; + linux,code = <KEY_UP>; + microchip,average-samples = <64>; + microchip,average-scaling = <16>; + microchip,pre-charge-time-ns = <10000>; + }; + + right@1 { + reg = <1>; + linux,code = <KEY_RIGHT>; + microchip,average-samples = <64>; + microchip,average-scaling = <8>; + }; + + down@3 { + reg = <3>; + linux,code = <KEY_DOWN>; + microchip,average-samples = <256>; + microchip,average-scaling = <16>; + }; +}; diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt new file mode 100644 index 000000000..1faa7292e --- /dev/null +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -0,0 +1,55 @@ +* Tegra keyboard controller +The key controller has maximum 24 pins to make matrix keypad. Any pin +can be configured as row or column. The maximum column pin can be 8 +and maximum row pins can be 16 for Tegra20/Tegra30. + +Required properties: +- compatible: "nvidia,tegra20-kbc" +- reg: Register base address of KBC. +- interrupts: Interrupt number for the KBC. +- nvidia,kbc-row-pins: The KBC pins which are configured as row. This is an + array of pin numbers which is used as rows. +- nvidia,kbc-col-pins: The KBC pins which are configured as column. This is an + array of pin numbers which is used as column. +- linux,keymap: The keymap for keys as described in the binding document + devicetree/bindings/input/matrix-keymap.txt. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - kbc + +Optional properties, in addition to those specified by the shared +matrix-keyboard bindings: + +- linux,fn-keymap: a second keymap, same specification as the + matrix-keyboard-controller spec but to be used when the KEY_FN modifier + key is pressed. +- nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing +- nvidia,repeat-delay-ms: delay in milliseconds before repeat starts +- nvidia,ghost-filter: enable ghost filtering for this device +- wakeup-source: configure keyboard as a wakeup source for suspend/resume + (Legacy property supported: "nvidia,wakeup-source") + +Example: + +keyboard: keyboard { + compatible = "nvidia,tegra20-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + resets = <&tegra_car 36>; + reset-names = "kbc"; + nvidia,ghost-filter; + nvidia,debounce-delay-ms = <640>; + nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */ + nvidia,kbc-col-pins = <11 12 13>; /* pin 11, 12, 13 as columns */ + linux,keymap = <0x00000074 + 0x00010067 + 0x00020066 + 0x01010068 + 0x02000069 + 0x02010070 + 0x02020071>; +}; diff --git a/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml b/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml new file mode 100644 index 000000000..9e0d977bd --- /dev/null +++ b/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/nxp,lpc3220-key.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx Key Scan Interface + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc3220-key + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + nxp,debounce-delay-ms: + description: Debounce delay in ms + + nxp,scan-delay-ms: + description: Repeated scan period in ms + +required: + - compatible + - reg + - interrupts + - clocks + - nxp,debounce-delay-ms + - nxp,scan-delay-ms + - linux,keymap + +allOf: + - $ref: matrix-keymap.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/lpc32xx-clock.h> + + key@40050000 { + compatible = "nxp,lpc3220-key"; + reg = <0x40050000 0x1000>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + keypad,num-rows = <1>; + keypad,num-columns = <1>; + nxp,debounce-delay-ms = <3>; + nxp,scan-delay-ms = <34>; + linux,keymap = <0x00000002>; + }; diff --git a/Documentation/devicetree/bindings/input/omap-keypad.txt b/Documentation/devicetree/bindings/input/omap-keypad.txt new file mode 100644 index 000000000..34ed1c60f --- /dev/null +++ b/Documentation/devicetree/bindings/input/omap-keypad.txt @@ -0,0 +1,28 @@ +* TI's Keypad Controller device tree bindings + +TI's Keypad controller is used to interface a SoC with a matrix-type +keypad device. The keypad controller supports multiple row and column lines. +A key can be placed at each intersection of a unique row and a unique column. +The keypad controller can sense a key-press and key-release and report the +event using a interrupt to the cpu. + +This binding is based on the matrix-keymap binding with the following +changes: + +keypad,num-rows and keypad,num-columns are required. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "ti,omap4-keypad": For controllers compatible with omap4 keypad + controller. + +Optional Properties specific to linux: +- linux,keypad-no-autorepeat: do no enable autorepeat feature. + +Example: + keypad@4ae1c000{ + compatible = "ti,omap4-keypad"; + keypad,num-rows = <2>; + keypad,num-columns = <8>; + linux,keypad-no-autorepeat; + }; diff --git a/Documentation/devicetree/bindings/input/parade,tc3408.yaml b/Documentation/devicetree/bindings/input/parade,tc3408.yaml new file mode 100644 index 000000000..30ffefb96 --- /dev/null +++ b/Documentation/devicetree/bindings/input/parade,tc3408.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/parade,tc3408.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parade TC3408 touchscreen controller + +maintainers: + - Langyan Ye <yelangyan@huaqin.corp-partner.google.com> + +description: | + Parade TC3408 is a touchscreen controller supporting the I2C-HID protocol. + It requires a reset GPIO and two power supplies (3.3V and 1.8V). + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + const: parade,tc3408 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vcc33-supply: + description: The 3.3V supply to the touchscreen. + + vccio-supply: + description: The 1.8V supply to the touchscreen. + +required: + - compatible + - reg + - interrupts + - reset-gpios + - vcc33-supply + - vccio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: touchscreen@24 { + compatible = "parade,tc3408"; + reg = <0x24>; + + interrupt-parent = <&pio>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 126 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_tchscr_x>; + vccio-supply = <&pp1800_tchscr_report_disable>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml new file mode 100644 index 000000000..490f6c3d9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pine64 PinePhone keyboard + +maintainers: + - Samuel Holland <samuel@sholland.org> + +description: + A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro. + It connects via I2C, providing a raw scan matrix, a flashing interface, and a + subordinate I2C bus for communication with a battery charger IC. + +properties: + compatible: + const: pine64,pinephone-keyboard + + reg: + const: 0x15 + + interrupts: + maxItems: 1 + + vbat-supply: + description: Supply for the keyboard MCU + + wakeup-source: true + + i2c: + $ref: /schemas/i2c/i2c-controller.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + keyboard@15 { + compatible = "pine64,pinephone-keyboard"; + reg = <0x15>; + interrupt-parent = <&r_pio>; + interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@75 { + reg = <0x75>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt new file mode 100644 index 000000000..3029c5694 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt @@ -0,0 +1,16 @@ +Aeroflex Gaisler APBPS2 PS/2 Core, supporting Keyboard or Mouse. + +The APBPS2 PS/2 core is available in the GRLIB VHDL IP core library. + +Note: In the ordinary environment for the APBPS2 core, a LEON SPARC system, +these properties are built from information in the AMBA plug&play and from +bootloader settings. + +Required properties: + +- name : Should be "GAISLER_APBPS2" or "01_060" +- reg : Address and length of the register set for the device +- interrupts : Interrupt numbers for this device + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml new file mode 100644 index 000000000..a7611c206 --- /dev/null +++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/pwm-beeper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM beeper + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + const: pwm-beeper + + pwms: + maxItems: 1 + + amp-supply: + description: an amplifier for the beeper + + beeper-hz: + description: bell frequency in Hz + minimum: 10 + maximum: 10000 + +required: + - compatible + - pwms + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + beeper { + compatible = "pwm-beeper"; + pwms = <&pwm0>; + amp-supply = <&beeper_amp>; + beeper-hz = <1000>; + }; diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml new file mode 100644 index 000000000..6398534b4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/pwm-vibrator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM vibrator + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: > + Registers a PWM device as vibrator. It is expected, that the vibrator's + strength increases based on the duty cycle of the enable PWM channel + (100% duty cycle meaning strongest vibration, 0% meaning no vibration). + + The binding supports an optional direction PWM channel, that can be + driven at fixed duty cycle. If available this is can be used to increase + the vibration effect of some devices. + +properties: + compatible: + const: pwm-vibrator + + pwm-names: + items: + - const: enable + - const: direction + minItems: 1 + + pwms: + minItems: 1 + maxItems: 2 + + enable-gpios: true + + vcc-supply: true + + direction-duty-cycle-ns: + description: > + Duty cycle of the direction PWM channel in nanoseconds, + defaults to 50% of the channel's period. + +required: + - compatible + - pwm-names + - pwms + +additionalProperties: false + +examples: + - | + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 1000000000 0>, + <&pwm8 0 1000000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <1000000000>; + }; diff --git a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt new file mode 100644 index 000000000..f8674f7e5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt @@ -0,0 +1,60 @@ +* Marvell PXA Keypad controller + +Required Properties +- compatible : should be "marvell,pxa27x-keypad" +- reg : Address and length of the register set for the device +- interrupts : The interrupt for the keypad controller +- marvell,debounce-interval : How long time the key will be + recognized when it is pressed. It is a u32 value, and bit[31:16] + is debounce interval for direct key and bit[15:0] is debounce + interval for matrix key. The value is in binary number of 2ms + +Optional Properties For Matrix Keyes +Please refer to matrix-keymap.txt + +Optional Properties for Direct Keyes +- marvell,direct-key-count : How many direct keyes are used. +- marvell,direct-key-mask : The mask indicates which keyes + are used. If bit[X] of the mask is set, the direct key X + is used. +- marvell,direct-key-low-active : Direct key status register + tells the level of pins that connects to the direct keyes. + When this property is set, it means that when the pin level + is low, the key is pressed(active). +- marvell,direct-key-map : It is a u16 array. Each item indicates + the linux key-code for the direct key. + +Optional Properties For Rotary +- marvell,rotary0 : It is a u32 value. Bit[31:16] is the + linux key-code for rotary up. Bit[15:0] is the linux key-code + for rotary down. It is for rotary 0. +- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1. +- marvell,rotary-rel-key : When rotary is used for relative axes + in the device, the value indicates the key-code for relative + axes measurement in the device. It is a u32 value. Bit[31:16] + is for rotary 1, and Bit[15:0] is for rotary 0. + +Examples: + keypad: keypad@d4012000 { + keypad,num-rows = <3>; + keypad,num-columns = <5>; + linux,keymap = <0x0000000e /* KEY_BACKSPACE */ + 0x0001006b /* KEY_END */ + 0x00020061 /* KEY_RIGHTCTRL */ + 0x0003000b /* KEY_0 */ + 0x00040002 /* KEY_1 */ + 0x0100008b /* KEY_MENU */ + 0x01010066 /* KEY_HOME */ + 0x010200e7 /* KEY_SEND */ + 0x01030009 /* KEY_8 */ + 0x0104000a /* KEY_9 */ + 0x02000160 /* KEY_OK */ + 0x02010003 /* KEY_2 */ + 0x02020004 /* KEY_3 */ + 0x02030005 /* KEY_4 */ + 0x02040006>; /* KEY_5 */ + marvell,rotary0 = <0x006c0067>; /* KEY_UP & KEY_DOWN */ + marvell,direct-key-count = <1>; + marvell,direct-key-map = <0x001c>; + marvell,debounce-interval = <0x001e001e>; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml new file mode 100644 index 000000000..e03611eef --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8921-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8921 PMIC KeyPad + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +allOf: + - $ref: input.yaml# + - $ref: matrix-keymap.yaml# + +properties: + compatible: + enum: + - qcom,pm8058-keypad + - qcom,pm8921-keypad + + reg: + maxItems: 1 + + interrupts: + items: + - description: key sense + - description: key stuck + + wakeup-source: + type: boolean + description: use any event on keypad as wakeup event + + linux,keypad-wakeup: + type: boolean + deprecated: true + description: legacy version of the wakeup-source property + + debounce: + description: + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + scan-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: time in microseconds to pause between successive scans of the + matrix array + + row-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: time in nanoseconds to pause between scans of each row in the + matrix array. + +required: + - compatible + - reg + - interrupts + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml new file mode 100644 index 000000000..645908948 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8921-pwrkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8921 PMIC Power Key + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +allOf: + - $ref: input.yaml# + +properties: + compatible: + oneOf: + - enum: + - qcom,pm8921-pwrkey + - qcom,pm8058-pwrkey + - items: + - enum: + - qcom,pm8018-pwrkey + - const: qcom,pm8921-pwrkey + + reg: + maxItems: 1 + + interrupts: + items: + - description: key release + - description: key press + + debounce: + description: + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + pull-up: + description: + Presence of this property indicates that the KPDPWR_N + pin should be configured for pull up. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ssbi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicint>; + interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml new file mode 100644 index 000000000..f2543d6fa --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8941 PMIC Power Key + +maintainers: + - Courtney Cavin <courtney.cavin@sonymobile.com> + - Vinod Koul <vkoul@kernel.org> + +properties: + compatible: + oneOf: + - enum: + - qcom,pm8941-pwrkey + - qcom,pm8941-resin + - qcom,pmk8350-pwrkey + - qcom,pmk8350-resin + - items: + - const: qcom,pmm8654au-pwrkey + - const: qcom,pmk8350-pwrkey + - items: + - const: qcom,pmm8654au-resin + - const: qcom,pmk8350-resin + + interrupts: + maxItems: 1 + + debounce: + description: + Time in microseconds that key must be pressed or released for state + change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + bias-pull-up: + description: + Presence of this property indicates that the KPDPWR_N pin should be + configured for pull up. + $ref: /schemas/types.yaml#/definitions/flag + + wakeup-source: + description: + Button can wake-up the system. Only applicable for 'resin', 'pwrkey' + always wakes the system by default. + + linux,code: + description: + The input key-code associated with the power key. Use the linux event + codes defined in include/dt-bindings/input/linux-event-codes.h. + When property is omitted KEY_POWER is assumed. + +allOf: + - $ref: input.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-pwrkey + - qcom,pmk8350-pwrkey + then: + properties: + wakeup-source: false + +required: + - compatible + - interrupts + +unevaluatedProperties: false +... diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml new file mode 100644 index 000000000..76a286ec5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC Vibrator + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + oneOf: + - enum: + - qcom,pm8058-vib + - qcom,pm8916-vib + - qcom,pm8921-vib + - qcom,pmi632-vib + - items: + - enum: + - qcom,pm6150-vib + - qcom,pm7250b-vib + - qcom,pm7325b-vib + - qcom,pm7550ba-vib + - const: qcom,pmi632-vib + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pmic { + #address-cells = <1>; + #size-cells = <0>; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml new file mode 100644 index 000000000..e6cdaed9c --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,spmi-haptics.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Haptics device inside Qualcomm Technologies, Inc. PMIC + +maintainers: + - Fenglin Wu <fenglin.wu@oss.qualcomm.com> + +description: | + Certain Qualcomm PMICs integrate a haptics module, such as the HAP530_HV haptics + module in the PMIH0108 PMIC, which drives an LRA (Linear Resonant Actuator) with + an output voltage up to 10 V. Several play modes are supported in HAP530_HV: + + DIRECT_PLAY: The hardware outputs sinusoidal waveforms whose period is + defined by qcom,lra-period-us and whose peak voltage is defined by + qcom,vmax-microvolt. The driving amplitude can be scaled in the range + [0, 255] via a single register byte. Hardware-based LRA auto-resonance + tracking is enabled by default in this mode, allowing the haptics engine + to follow the actual resonant frequency of the LRA and update the driving + period accordingly to achieve stronger vibration magnitude. + + FIFO: The hardware can play an arbitrary waveform composed of a sequence + of 8-bit samples at a configurable play rate. Samples are pre-filled + into the internal FIFO memory of the haptics module and continuously + replenished via the FIFO-empty IRQ until all samples have been played. + An 8K-byte FIFO memory bank is available in the HAP530_HV haptics module, + shared between the FIFO and PAT_MEM play modes. The memory partition + between the two modes is configurable via registers, and FIFO mode always + uses the 1st partition starting from offset 0. + + PAT_MEM: This mode is very similar to FIFO streaming mode but without the + data refilling capability. It is designed mainly for short, latency-critical + vibrations. The memory space for PAT_MEM mode must be reserved for dedicated + usage, and the waveform data should be preloaded and remain unchanged + thereafter. The haptics module can play the waveform data from the memory + region specified by the PAT_MEM play start address and length registers. + + In either FIFO mode or PAT_MEM mode, the following play rates are supported: + -- 0(T_LRA): each FIFO byte drives one full sinusoidal cycle with the + period defined in qcom,lra-period-us. + -- 1/2/3(T_LRA_DIV_2/4/8): each FIFO byte drives a half/quarter/eighth + sinusoidal cycle with the period defined in qcom,lra-period-us. + -- 4/5/6(T_LRA_X_2/4/8): each FIFO byte drives 2/4/8 sinusoidal cycles + with the period defined in qcom,lra-period-us. + -- 8/9/10/11/12/13(8KHz/16KHz/24KHz/32KHz/44.1KHz/48KHz): the FIFO + data is treated as PCM samples and drives the output with an + arbitrarily shaped waveform. This mode is typically used to define + custom driving waveforms for specific vibration effects such as fast + attack, crisp brake, etc. + + The drive voltage in FIFO or PAT_MEM mode can exceed the value defined in + qcom,vmax-microvolt to achieve a special vibration effect, but the waveform + must be short enough to prevent the LRA from being damaged by operating at + an overvoltage. + + Also, hardware-based LRA auto-resonance tracking is normally disabled in + FIFO or PAT_MEM mode, as these modes are intended to drive arbitrary + waveforms that may not follow the resonant frequency; autonomous hardware + resonance correction would interfere with the intended output. + +properties: + compatible: + items: + - const: qcom,pmih0108-haptics + - const: qcom,spmi-haptics + + reg: + items: + - description: HAP_CFG module base address + - description: HAP_PTN module base address + + reg-names: + items: + - const: cfg + - const: ptn + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: fifo-empty + + qcom,vmax-microvolt: + description: + Maximum allowed output driving voltage in microvolts, must be a multiple + of 50,000 uV. This is the peak driving voltage in DIRECT_PLAY mode, + which outputs sinusoidal waveforms. The value should be equal to the + square root of 2 times the Vrms voltage of the LRA. + minimum: 50000 + maximum: 10000000 + multipleOf: 50000 + + qcom,lra-period-us: + description: + LRA actuator initial resonance period in microseconds + (1,000,000 / resonant_freq_hz). Used to configure T_LRA-based play + rates and the auto-resonance zero-crossing window. It could be also used + as the initial period if the LRA wants to be driven off resonance. + minimum: 5 + maximum: 20475 + multipleOf: 5 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - qcom,vmax-microvolt + - qcom,lra-period-us + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt new file mode 100644 index 000000000..99a4f2ab5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt @@ -0,0 +1,19 @@ +Raydium I2C touchscreen + +Required properties: +- compatible: must be "raydium,rm32380" +- reg: The I2C address of the device +- interrupts: interrupt to which the chip is connected + See ../interrupt-controller/interrupts.txt +Optional properties: +- avdd-supply: analog power supply needed to power device +- vccio-supply: IO Power source +- reset-gpios: reset gpio the chip is connected to. + +Example: + touchscreen@39 { + compatible = "raydium,rm32380"; + reg = <0x39>; + interrupt-parent = <&gpio>; + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; + }; diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml new file mode 100644 index 000000000..cf63f834d --- /dev/null +++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/regulator-haptic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator Haptic + +maintainers: + - Jaewon Kim <jaewon02.kim@samsung.com> + +properties: + compatible: + const: regulator-haptic + + haptic-supply: + description: > + Power supply to the haptic motor + + max-microvolt: + description: > + The maximum voltage value supplied to the haptic motor + + min-microvolt: + description: > + The minimum voltage value supplied to the haptic motor + +required: + - compatible + - haptic-supply + - max-microvolt + - min-microvolt + +additionalProperties: false + +examples: + - | + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&motor_regulator>; + max-microvolt = <2700000>; + min-microvolt = <1100000>; + }; diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.yaml b/Documentation/devicetree/bindings/input/rotary-encoder.yaml new file mode 100644 index 000000000..f9332bb23 --- /dev/null +++ b/Documentation/devicetree/bindings/input/rotary-encoder.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/rotary-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rotary encoder + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + See Documentation/input/devices/rotary-encoder.rst for more information. + +properties: + compatible: + const: rotary-encoder + + gpios: + minItems: 2 + + linux,axis: + default: 0 + description: + the input subsystem axis to map to this rotary encoder. + Defaults to 0 (ABS_X / REL_X) + + rotary-encoder,steps: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 24 + description: + Number of steps in a full turnaround of the + encoder. Only relevant for absolute axis. Defaults to 24 which is a + typical value for such devices. + + rotary-encoder,relative-axis: + $ref: /schemas/types.yaml#/definitions/flag + description: + register a relative axis rather than an + absolute one. Relative axis will only generate +1/-1 events on the input + device, hence no steps need to be passed. + + rotary-encoder,rollover: + $ref: /schemas/types.yaml#/definitions/flag + description: + Automatic rollover when the rotary value becomes + greater than the specified steps or smaller than 0. For absolute axis only. + + rotary-encoder,steps-per-period: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + enum: [1, 2, 4] + description: | + Number of steps (stable states) per period. + The values have the following meaning: + 1: Full-period mode (default) + 2: Half-period mode + 4: Quarter-period mode + + wakeup-source: true + + rotary-encoder,encoding: + $ref: /schemas/types.yaml#/definitions/string + description: the method used to encode steps. + enum: [gray, binary] + + rotary-encoder,half-period: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true + description: + Makes the driver work on half-period mode. + This property is deprecated. Instead, a 'steps-per-period ' value should + be used, such as "rotary-encoder,steps-per-period = <2>". + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + rotary { + compatible = "rotary-encoder"; + gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,encoding = "gray"; + rotary-encoder,relative-axis; + }; + diff --git a/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml new file mode 100644 index 000000000..a53569aa0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series Keypad Controller + +description: + Samsung SoC Keypad controller is used to interface a SoC with a matrix-type + keypad device. The keypad controller supports multiple row and column lines. + A key can be placed at each intersection of a unique row and a unique column. + The keypad controller can sense a key-press and key-release and report the + event using a interrupt to the cpu. + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c6410-keypad + - samsung,s5pv210-keypad + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: keypad + + interrupts: + maxItems: 1 + + wakeup-source: true + + linux,input-no-autorepeat: + type: boolean + description: + Do no enable autorepeat feature. + + linux,input-wakeup: + type: boolean + deprecated: true + + samsung,keypad-num-columns: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of column lines connected to the keypad controller. + + samsung,keypad-num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of row lines connected to the keypad controller. + +patternProperties: + '^key-[0-9a-z]+$': + type: object + $ref: input.yaml# + additionalProperties: false + description: + Each key connected to the keypad controller is represented as a child + node to the keypad controller device node. + + properties: + keypad,column: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The column number to which the key is connected. + + keypad,row: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The row number to which the key is connected. + + linux,code: true + + required: + - keypad,column + - keypad,row + - linux,code + +required: + - compatible + - reg + - interrupts + - samsung,keypad-num-columns + - samsung,keypad-num-rows + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + keypad@100a0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100a0000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_KEYIF>; + clock-names = "keypad"; + + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,input-no-autorepeat; + wakeup-source; + + key-1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key-2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/spear-keyboard.txt b/Documentation/devicetree/bindings/input/spear-keyboard.txt new file mode 100644 index 000000000..4a846d26d --- /dev/null +++ b/Documentation/devicetree/bindings/input/spear-keyboard.txt @@ -0,0 +1,20 @@ +* SPEAr keyboard controller + +Required properties: +- compatible: "st,spear300-kbd" + +Optional properties, in addition to those specified by the shared +matrix-keyboard bindings: +- autorepeat: bool: enables key autorepeat +- st,mode: keyboard mode: 0 - 9x9, 1 - 6x6, 2 - 2x2 + +Example: + +kbd@fc400000 { + compatible = "st,spear300-kbd"; + reg = <0xfc400000 0x100>; + linux,keymap = < 0x00030012 + 0x0102003a >; + autorepeat; + st,mode = <0>; +}; diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml new file mode 100644 index 000000000..4c8d303ff --- /dev/null +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/sprd,sc27xx-vibrator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC27xx PMIC Vibrator + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,sc2721-vibrator + - sprd,sc2730-vibrator + - sprd,sc2731-vibrator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/input/st-keyscan.txt b/Documentation/devicetree/bindings/input/st-keyscan.txt new file mode 100644 index 000000000..51eb428e5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/st-keyscan.txt @@ -0,0 +1,60 @@ +* ST Keyscan controller Device Tree bindings + +The ST keyscan controller Device Tree binding is based on the +matrix-keymap. + +Required properties: +- compatible: "st,sti-keyscan" + +- reg: Register base address and size of st-keyscan controller. + +- interrupts: Interrupt number for the st-keyscan controller. + +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +- pinctrl: Should specify pin control groups used for this controller. + See ../pinctrl/pinctrl-bindings.txt for details. + +- linux,keymap: The keymap for keys as described in the binding document + devicetree/bindings/input/matrix-keymap.txt. + +- keypad,num-rows: Number of row lines connected to the keypad controller. + +- keypad,num-columns: Number of column lines connected to the keypad + controller. + +Optional property: +- st,debounce_us: Debouncing interval time in microseconds + +Example: + +keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&CLK_SYSIN>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + + keypad,num-rows = <4>; + keypad,num-columns = <4>; + st,debounce_us = <5000>; + + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) + MATRIX_KEY(0x00, 0x01, KEY_F9) + MATRIX_KEY(0x00, 0x02, KEY_F5) + MATRIX_KEY(0x00, 0x03, KEY_F1) + MATRIX_KEY(0x01, 0x00, KEY_F14) + MATRIX_KEY(0x01, 0x01, KEY_F10) + MATRIX_KEY(0x01, 0x02, KEY_F6) + MATRIX_KEY(0x01, 0x03, KEY_F2) + MATRIX_KEY(0x02, 0x00, KEY_F15) + MATRIX_KEY(0x02, 0x01, KEY_F11) + MATRIX_KEY(0x02, 0x02, KEY_F7) + MATRIX_KEY(0x02, 0x03, KEY_F3) + MATRIX_KEY(0x03, 0x00, KEY_F16) + MATRIX_KEY(0x03, 0x01, KEY_F12) + MATRIX_KEY(0x03, 0x02, KEY_F8) + MATRIX_KEY(0x03, 0x03, KEY_F4) >; + }; diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml new file mode 100644 index 000000000..fb4804ac3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml @@ -0,0 +1,298 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/syna,rmi4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics RMI4 compliant devices + +maintainers: + - Jason A. Donenfeld <Jason@zx2c4.com> + - Matthias Schiffer <matthias.schiffer@ew.tq-group.com> + - Vincent Huang <vincent.huang@tw.synaptics.com> + +description: | + The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4 + devices using different transports (I2C, SPI) and different functions (e.g. + Function 1, 2D sensors using Function 11 or 12). + +properties: + compatible: + oneOf: + - enum: + - syna,rmi4-i2c + - syna,rmi4-spi + - items: + - enum: + - syna,rmi4-s3706b # OnePlus 6/6T + - const: syna,rmi4-i2c + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: Active low signal + + spi-cpha: true + spi-cpol: true + + syna,reset-delay-ms: + description: + Delay to wait after resetting the device. + + syna,startup-delay-ms: + description: + Delay to wait after powering on the device. + + vdd-supply: true + vio-supply: true + + rmi4-f01@1: + type: object + additionalProperties: false + description: + Function 1 + + properties: + reg: + maxItems: 1 + + syna,nosleep-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + If set the device will run at full power without sleeping. nosleep + has 3 modes, 0 will not change the default setting, 1 will disable + nosleep (allow sleeping), and 2 will enable nosleep (disabling + sleep). + + syna,wakeup-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the amplitude of the disturbance to the background + capacitance that will cause the device to wake from dozing. + + syna,doze-holdoff-ms: + description: + The delay to wait after the last finger lift and the first doze + cycle. + + syna,doze-interval-ms: + description: + The time period that the device sleeps between finger activity. + + required: + - reg + + rmi4-f1a@1a: + type: object + additionalProperties: false + $ref: input.yaml# + description: + RMI4 Function 1A is for capacitive keys. + + properties: + reg: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 4 + + required: + - reg + +patternProperties: + "^rmi4-f1[12]@1[12]$": + type: object + unevaluatedProperties: false + $ref: /schemas/input/touchscreen/touchscreen.yaml# + description: + RMI4 Function 11 and Function 12 are for 2D touch position sensing. + + properties: + reg: + maxItems: 1 + + syna,clip-x-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for X. + + syna,clip-y-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for Y. + + syna,clip-x-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for X. + + syna,clip-y-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for Y. + + syna,offset-x: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to X. + + syna,offset-y: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to Y. + + syna,delta-x-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the X axis required to generate an interrupt in + reduced reporting mode. + + syna,delta-y-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the Y axis required to generate an interrupt in + reduced reporting mode. + + syna,sensor-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + description: | + Sensor type: 1 for touchscreen 2 for touchpad. + + syna,disable-report-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mask for disabling posiiton reporting. Used to disable reporing + absolute position data. + + syna,rezero-wait-ms: + description: + Time to wait after issuing a rezero command. + + required: + - reg + + "^rmi4-f[0-9a-f]+@[0-9a-f]+$": + type: object + additionalProperties: true + + description: + Other functions, not documented yet. + + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + properties: + compatible: + contains: + const: syna,rmi4-i2c + then: + properties: + spi-rx-delay-us: false + spi-tx-delay-us: false + else: + properties: + syna,reset-delay-ms: false + syna,startup-delay-ms: false + +examples: + - | + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + syna,startup-delay-ms = <100>; + vdd-supply = <&tsp_vdd>; + vio-supply = <&ldo32_reg>; + + pinctrl-0 = <&touch_irq>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + + rmi4-f1a@1a { + reg = <0x1a>; + linux,keycodes = <KEY_BACK KEY_HOME KEY_MENU>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "syna,rmi4-spi"; + reg = <0x0>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + spi-max-frequency = <4000000>; + spi-rx-delay-us = <30>; + spi-cpha; + spi-cpol; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-y; + syna,sensor-type = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.yaml b/Documentation/devicetree/bindings/input/ti,drv260x.yaml new file mode 100644 index 000000000..c6245c5b9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv260x.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,drv260x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - drv260x Haptics driver family + +maintainers: + - Andrew Davis <afd@ti.com> + +properties: + compatible: + enum: + - ti,drv2604 + - ti,drv2605 + - ti,drv2605l + + reg: + maxItems: 1 + + vbat-supply: + description: Power supply to the haptic motor + + # TODO: Deprecate 'mode' in favor of differently named property + mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Power up mode of the chip + (defined in include/dt-bindings/input/ti-drv260x.h) + + DRV260X_LRA_MODE + Linear Resonance Actuator mode (Piezoelectric) + + DRV260X_LRA_NO_CAL_MODE + This is a LRA Mode but there is no calibration sequence during init. + And the device is configured for real time playback mode (RTP mode). + + DRV260X_ERM_MODE + Eccentric Rotating Mass mode (Rotary vibrator) + enum: [ 0, 1, 2 ] + + library-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + These are ROM based waveforms pre-programmed into the IC. + This should be set to set the library to use at power up. + (defined in include/dt-bindings/input/ti-drv260x.h) + + DRV260X_LIB_EMPTY - Do not use a pre-programmed library + DRV260X_ERM_LIB_A - Pre-programmed Library + DRV260X_ERM_LIB_B - Pre-programmed Library + DRV260X_ERM_LIB_C - Pre-programmed Library + DRV260X_ERM_LIB_D - Pre-programmed Library + DRV260X_ERM_LIB_E - Pre-programmed Library + DRV260X_ERM_LIB_F - Pre-programmed Library + DRV260X_LIB_LRA - Pre-programmed LRA Library + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + + enable-gpio: + maxItems: 1 + deprecated: true + + enable-gpios: + maxItems: 1 + + vib-rated-mv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The rated voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to 3200 mV. + default: 3200 + + vib-overdrive-mv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The overdrive voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to 3200 mV. + default: 3200 + +required: + - compatible + - reg + - enable-gpios + - mode + - library-sel + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/ti-drv260x.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptics@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + vbat-supply = <&vbat>; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mode = <DRV260X_LRA_MODE>; + library-sel = <DRV260X_LIB_LRA>; + vib-rated-mv = <3200>; + vib-overdrive-mv = <3200>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml new file mode 100644 index 000000000..1bce389d0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,drv266x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - drv266x Haptics driver + +description: | + Product Page: + http://www.ti.com/product/drv2665 + http://www.ti.com/product/drv2667 + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + enum: + - ti,drv2665 + - ti,drv2667 + + reg: + maxItems: 1 + + vbat-supply: + description: Required supply regulator + +required: + - compatible + - reg + - vbat-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptics@59 { + compatible = "ti,drv2667"; + reg = <0x59>; + vbat-supply = <&vbat>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml b/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml new file mode 100644 index 000000000..ed3cfff13 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,nspire-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-NSPIRE Keypad + +maintainers: + - Andrew Davis <afd@ti.com> + +allOf: + - $ref: input.yaml# + - $ref: matrix-keymap.yaml# + +properties: + compatible: + enum: + - ti,nspire-keypad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + scan-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: How often to scan in us. Based on a APB speed of 33MHz, the + maximum and minimum delay time is ~2000us and ~500us respectively + + row-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: How long to wait between scanning each row in us. + + active-low: + description: Specify that the keypad is active low. + +required: + - compatible + - reg + - interrupts + - clocks + - scan-interval + - row-delay + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + keypad@900e0000 { + compatible = "ti,nspire-keypad"; + reg = <0x900e0000 0x1000>; + interrupts = <16>; + + clocks = <&apb_pclk>; + + scan-interval = <1000>; + row-delay = <200>; + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_ENTER) + MATRIX_KEY(0, 1, KEY_ENTER) + MATRIX_KEY(0, 4, KEY_SPACE) + MATRIX_KEY(0, 5, KEY_Z) + MATRIX_KEY(0, 6, KEY_Y) + MATRIX_KEY(0, 7, KEY_0) + >; + }; diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt new file mode 100644 index 000000000..c829e18e1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt @@ -0,0 +1,35 @@ +Texas Instruments Palmas family power button module + +This module is part of the Palmas family of PMICs. For more details +about the whole chip see: +Documentation/devicetree/bindings/mfd/palmas.txt. + +This module provides a simple power button event via an Interrupt. + +Required properties: +- compatible: should be one of the following + - "ti,palmas-pwrbutton": For Palmas compatible power on button +- interrupts: Interrupt number of power button submodule on device. + +Optional Properties: + +- ti,palmas-long-press-seconds: Duration in seconds which the power + button should be kept pressed for Palmas to power off automatically. + NOTE: This depends on OTP support and POWERHOLD signal configuration + on platform. Valid values are 6, 8, 10 and 12. +- ti,palmas-pwron-debounce-milli-seconds: Duration in milliseconds + which the power button should be kept pressed for Palmas to register + a press for debouncing purposes. NOTE: This depends on specific + Palmas variation capability. Valid values are 15, 100, 500 and 1000. + +Example: + +&palmas { + palmas_pwr_button: pwrbutton { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + ti,palmas-long-press-seconds = <12>; + ti,palmas-pwron-debounce-milli-seconds = <15>; + }; +}; diff --git a/Documentation/devicetree/bindings/input/ti,tca8418.yaml b/Documentation/devicetree/bindings/input/ti,tca8418.yaml new file mode 100644 index 000000000..624a1830d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,tca8418.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,tca8418.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TCA8418 I2C/SMBus keypad scanner + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - ti,tca8418 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: matrix-keymap.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + keypad@34 { + compatible = "ti,tca8418"; + reg = <0x34>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + keypad,num-rows = <4>; + keypad,num-columns = <4>; + linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0) + MATRIX_KEY(0x00, 0x00, BTN_1) + MATRIX_KEY(0x01, 0x01, BTN_2) + MATRIX_KEY(0x01, 0x00, BTN_3) + MATRIX_KEY(0x02, 0x00, BTN_4) + MATRIX_KEY(0x00, 0x03, BTN_5) + MATRIX_KEY(0x00, 0x02, BTN_6) + MATRIX_KEY(0x01, 0x03, BTN_7) + MATRIX_KEY(0x01, 0x02, BTN_8) + MATRIX_KEY(0x02, 0x02, BTN_9) + >; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ti,tps65217-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ti,tps65217-pwrbutton.yaml new file mode 100644 index 000000000..3526d8b04 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,tps65217-pwrbutton.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,tps65217-pwrbutton.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TPS65217 and TPS65218 Power Button + +maintainers: + - Eduard Bostina <egbostina@gmail.com> + +description: + This module is part of the TPS65217/TPS65218 PMIC. It provides a simple + power button event via an interrupt. + +properties: + compatible: + enum: + - ti,tps65217-pwrbutton + - ti,tps65218-pwrbutton + + interrupts: + maxItems: 1 + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + power-button { + compatible = "ti,tps65218-pwrbutton"; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ti,twl4030-keypad.yaml b/Documentation/devicetree/bindings/input/ti,twl4030-keypad.yaml new file mode 100644 index 000000000..c69aa7f5c --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,twl4030-keypad.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,twl4030-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL4030-family Keypad Controller + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@gmail.com> + +description: + TWL4030's Keypad controller is used to interface a SoC with a matrix-type + keypad device. The keypad controller supports multiple row and column lines. + A key can be placed at each intersection of a unique row and a unique column. + The keypad controller can sense a key-press and key-release and report the + event using a interrupt to the cpu. + +allOf: + - $ref: matrix-keymap.yaml# + +properties: + compatible: + const: ti,twl4030-keypad + + interrupts: + maxItems: 1 + +required: + - compatible + - interrupts + - keypad,num-rows + - keypad,num-columns + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + + keypad { + compatible = "ti,twl4030-keypad"; + interrupts = <1>; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + /* row 0 */ + MATRIX_KEY(0, 0, KEY_1) + MATRIX_KEY(0, 1, KEY_2) + MATRIX_KEY(0, 2, KEY_3) + + /* ...and so on for a full 8x8 matrix... */ + + /* row 7 */ + MATRIX_KEY(7, 6, KEY_Y) + MATRIX_KEY(7, 7, KEY_Z) + >; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml new file mode 100644 index 000000000..caa5fa3cc --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7879.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + description: | + for SPI slave, use "adi,ad7879" + for I2C slave, use "adi,ad7879-1" + enum: + - adi,ad7879 + - adi,ad7879-1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + touchscreen-max-pressure: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum reported pressure + + adi,resistance-plate-x: + $ref: /schemas/types.yaml#/definitions/uint32 + description: total resistance of X-plate (for pressure calculation) + + touchscreen-swapped-x-y: + $ref: /schemas/types.yaml#/definitions/flag + description: X and Y axis are swapped (boolean) + + adi,first-conversion-delay: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + minimum: 0 + maximum: 15 + description: | + 0-12: In 128us steps (starting with 128us) + 13 : 2.560ms + 14 : 3.584ms + 15 : 4.096ms + This property has to be a '/bits/ 8' value + + adi,acquisition-time: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + enum: [0, 1, 2, 3] + description: | + 0: 2us + 1: 4us + 2: 8us + 3: 16us + This property has to be a '/bits/ 8' value + + adi,median-filter-size: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + enum: [0, 1, 2, 3] + description: | + 0: disabled + 1: 4 measurements + 2: 8 measurements + 3: 16 measurements + This property has to be a '/bits/ 8' value + + adi,averaging: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + enum: [0, 1, 2, 3] + description: | + 0: 2 middle values (1 if median disabled) + 1: 4 middle values + 2: 8 middle values + 3: 16 values + This property has to be a '/bits/ 8' value + + adi,conversion-interval: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + description: | + 0 : convert one time only + 1-255: 515us + val * 35us (up to 9.440ms) + This property has to be a '/bits/ 8' value + + gpio-controller: true + + "#gpio-cells": + const: 1 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen0@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen1@1 { + compatible = "adi,ad7879"; + reg = <1>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml new file mode 100644 index 000000000..44158e89e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/apple,z2-multitouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple touchscreens attached using the Z2 protocol + +maintainers: + - Sasha Finkelstein <k@chaosmail.tech> + +description: A series of touschscreen controllers used in Apple products + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - apple,j293-touchbar + - apple,j493-touchbar + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + firmware-name: + maxItems: 1 + + apple,z2-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4096 + description: + Calibration blob supplied by the bootloader + +required: + - compatible + - interrupts + - reset-gpios + - firmware-name + - touchscreen-size-x + - touchscreen-size-y + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "apple,j293-touchbar"; + reg = <0>; + spi-max-frequency = <11500000>; + reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt new file mode 100644 index 000000000..b8db975e9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt @@ -0,0 +1,30 @@ +* AUO in-cell touchscreen controller using Pixcir sensors + +Required properties: +- compatible: must be "auo,auo_pixcir_ts" +- reg: I2C address of the chip +- interrupts: interrupt to which the chip is connected +- gpios: gpios the chip is connected to + first one is the interrupt gpio and second one the reset gpio +- x-size: horizontal resolution of touchscreen +- y-size: vertical resolution of touchscreen + +Example: + + i2c@00000000 { + /* ... */ + + auo_pixcir_ts@5c { + compatible = "auo,auo_pixcir_ts"; + reg = <0x5c>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */ + <&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */ + + x-size = <800>; + y-size = <600>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml new file mode 100644 index 000000000..e4dbbafb3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml @@ -0,0 +1,769 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs7211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS7210A/7211A/E Trackpad/Touchscreen Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS7210A, IQS7211A and IQS7211E trackpad and touchscreen control- + lers employ projected-capacitance sensing and can track two contacts. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs7210a + - azoteq,iqs7211a + - azoteq,iqs7211e + + reg: + maxItems: 1 + + irq-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low RDY output. The + pin doubles as the IQS7211E's active-low MCLR input, in which case this + GPIO must be configured as open-drain. + + reset-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low MCLR input. The + device is temporarily held in hardware reset prior to initialization if + this property is present. + + azoteq,forced-comms: + type: boolean + description: + Enables forced communication; to be used with host adapters that cannot + tolerate clock stretching. + + azoteq,forced-comms-default: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Indicates if the device's OTP memory enables (1) or disables (0) forced + communication by default. Specifying this property can expedite startup + time if the default value is known. + + If this property is not specified, communication is not initiated until + the device asserts its RDY pin shortly after exiting hardware reset. At + that point, forced communication is either enabled or disabled based on + the presence or absence of the 'azoteq,forced-comms' property. + + azoteq,rate-active-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during active mode. + + azoteq,rate-touch-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during idle-touch mode. + + azoteq,rate-idle-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during idle mode. + + azoteq,rate-lp1-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during low-power mode 1. + + azoteq,rate-lp2-ms: + minimum: 0 + maximum: 65535 + description: Specifies the report rate (in ms) during low-power mode 2. + + azoteq,timeout-active-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from active mode to idle or idle-touch modes. + + azoteq,timeout-touch-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from idle-touch mode to idle mode. + + azoteq,timeout-idle-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from idle mode to low-power mode 1. + + azoteq,timeout-lp1-ms: + multipleOf: 1000 + minimum: 0 + maximum: 65535000 + description: + Specifies the length of time (in ms) to wait for an event before moving + from low-power mode 1 to low-power mode 2. + + azoteq,timeout-lp2-ms: + multipleOf: 1000 + minimum: 0 + maximum: 60000 + description: + Specifies the rate (in ms) at which the trackpad reference values + are updated during low-power modes 1 and 2. + + azoteq,timeout-ati-ms: + multipleOf: 1000 + minimum: 0 + maximum: 60000 + description: + Specifies the delay (in ms) before the automatic tuning implementation + (ATI) is retried in the event it fails to complete. + + azoteq,timeout-comms-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the delay (in ms) before a communication window is closed. + + azoteq,timeout-press-ms: + multipleOf: 1000 + minimum: 0 + maximum: 60000 + description: + Specifies the length of time (in ms) to wait before automatically + releasing a press event. Specify zero to allow the press state to + persist indefinitely. + + azoteq,fosc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the device's core clock frequency as follows: + 0: 14 MHz + 1: 18 MHz + + azoteq,fosc-trim: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the device's core clock frequency trim. + + azoteq,num-contacts: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 + description: Specifies the number of contacts reported by the device. + + azoteq,contact-split: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the contact (finger) split factor. + + azoteq,trim-x: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the horizontal trim width. + + azoteq,trim-y: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the vertical trim height. + + trackpad: + type: object + description: Represents all channels associated with the trackpad. + + properties: + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the order of the CRx pin(s) associated with the trackpad. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 + items: + minimum: 0 + maximum: 11 + description: + Specifies the order of the CTx pin(s) associated with the trackpad. + + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 36 + items: + minimum: 0 + maximum: 255 + description: | + Specifies the channels mapped to each cycle in the following order: + Cycle 0, slot 0 + Cycle 0, slot 1 + Cycle 1, slot 0 + Cycle 1, slot 1 + ...and so on. Specify 255 to disable a given slot. + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the trackpad's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the trackpad's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the trackpad's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the trackpad's ATI compensation divider. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the trackpad's ATI target. + + azoteq,touch-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's touch entrance factor. + + azoteq,touch-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's touch exit factor. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's stationary touch threshold. + + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the trackpad's conversion frequency fraction. + + patternProperties: + "^event-(tap(-double|-triple)?|hold|palm|swipe-(x|y)-(pos|neg)(-hold)?)$": + type: object + $ref: ../input.yaml# + description: + Represents a gesture event reported by the trackpad. In the case of + axial gestures, the duration or distance specified in one direction + applies to both directions along the same axis. + + properties: + linux,code: true + + azoteq,gesture-max-ms: + minimum: 0 + maximum: 65535 + description: Specifies the maximum duration of tap/swipe gestures. + + azoteq,gesture-mid-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the maximum duration between subsequent tap gestures + (IQS7211E only). + + azoteq,gesture-min-ms: + minimum: 0 + maximum: 65535 + description: Specifies the minimum duration of hold gestures. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the minimum (swipe) or maximum (tap and hold) distance + a finger may travel to be considered a gesture. + + azoteq,gesture-dist-rep: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the minimum distance a finger must travel to elicit a + repeated swipe gesture (IQS7211E only). + + azoteq,gesture-angle: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 75 + description: + Specifies the maximum angle (in degrees) a finger may travel to + be considered a swipe gesture. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 42 + description: Specifies the palm gesture threshold (IQS7211E only). + + additionalProperties: false + + dependencies: + azoteq,rx-enable: ["azoteq,tx-enable"] + azoteq,tx-enable: ["azoteq,rx-enable"] + azoteq,channel-select: ["azoteq,rx-enable"] + + additionalProperties: false + + alp: + type: object + $ref: ../input.yaml# + description: Represents the alternate low-power channel (ALP). + + properties: + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the CRx pin(s) associated with the ALP in no particular + order. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 12 + items: + minimum: 0 + maximum: 11 + description: + Specifies the CTx pin(s) associated with the ALP in no particular + order. + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the ALP's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the ALP's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the ALP's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the ALP's ATI compensation divider. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the ALP's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 255 + description: Specifies the ALP's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the ALP's ATI mode as follows: + 0: Partial + 1: Full + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the ALP's sensing mode as follows: + 0: Self capacitive + 1: Mutual capacitive + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's debounce exit factor. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the ALP's proximity or touch threshold. + + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the ALP's conversion frequency fraction. + + linux,code: true + + additionalProperties: false + + button: + type: object + description: Represents the inductive or capacitive button. + + properties: + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the button's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the button's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the button's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the button's ATI compensation divider. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the button's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 255 + description: Specifies the button's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Specifies the button's ATI mode as follows: + 0: Partial + 1: Full + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: | + Specifies the button's sensing mode as follows: + 0: Self capacitive + 1: Mutual capacitive + 2: Inductive + + azoteq,touch-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's touch entrance factor. + + azoteq,touch-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's touch exit factor. + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's debounce exit factor. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the button's proximity threshold. + + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the button's conversion frequency fraction. + + patternProperties: + "^event-(prox|touch)$": + type: object + $ref: ../input.yaml# + description: + Represents a proximity or touch event reported by the button. + + properties: + linux,code: true + + additionalProperties: false + + additionalProperties: false + + wakeup-source: true + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +dependencies: + touchscreen-size-x: ["azoteq,num-contacts"] + touchscreen-size-y: ["azoteq,num-contacts"] + touchscreen-inverted-x: ["azoteq,num-contacts"] + touchscreen-inverted-y: ["azoteq,num-contacts"] + touchscreen-swapped-x-y: ["azoteq,num-contacts"] + +required: + - compatible + - reg + - irq-gpios + +additionalProperties: false + +allOf: + - $ref: touchscreen.yaml# + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7210a + + then: + properties: + alp: + properties: + azoteq,rx-enable: + maxItems: 4 + items: + minimum: 4 + + else: + properties: + azoteq,timeout-press-ms: false + + alp: + properties: + azoteq,ati-mode: false + + button: false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7211e + + then: + properties: + reset-gpios: false + + trackpad: + properties: + azoteq,tx-enable: + maxItems: 13 + items: + maximum: 12 + + alp: + properties: + azoteq,tx-enable: + maxItems: 13 + items: + maximum: 12 + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@56 { + compatible = "azoteq,iqs7210a"; + reg = <0x56>; + irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 17 (GPIO_ACTIVE_LOW | + GPIO_PUSH_PULL)>; + azoteq,num-contacts = <2>; + + trackpad { + azoteq,rx-enable = <6>, <5>, <4>, <3>, <2>; + azoteq,tx-enable = <1>, <7>, <8>, <9>, <10>; + }; + + button { + azoteq,sense-mode = <2>; + azoteq,touch-enter = <40>; + azoteq,touch-exit = <36>; + + event-touch { + linux,code = <KEY_HOME>; + }; + }; + + alp { + azoteq,sense-mode = <1>; + linux,code = <KEY_POWER>; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@56 { + compatible = "azoteq,iqs7211e"; + reg = <0x56>; + irq-gpios = <&gpio 4 (GPIO_ACTIVE_LOW | + GPIO_OPEN_DRAIN)>; + + trackpad { + event-tap { + linux,code = <KEY_PLAYPAUSE>; + }; + + event-tap-double { + linux,code = <KEY_SHUFFLE>; + }; + + event-tap-triple { + linux,code = <KEY_AGAIN>; + }; + + event-hold { + linux,code = <KEY_STOP>; + }; + + event-palm { + linux,code = <KEY_EXIT>; + }; + + event-swipe-x-pos { + linux,code = <KEY_REWIND>; + }; + + event-swipe-x-pos-hold { + linux,code = <KEY_PREVIOUS>; + }; + + event-swipe-x-neg { + linux,code = <KEY_FASTFORWARD>; + }; + + event-swipe-x-neg-hold { + linux,code = <KEY_NEXT>; + }; + + event-swipe-y-pos { + linux,code = <KEY_VOLUMEUP>; + }; + + event-swipe-y-pos-hold { + linux,code = <KEY_MUTE>; + }; + + event-swipe-y-neg { + linux,code = <KEY_VOLUMEDOWN>; + }; + + event-swipe-y-neg-hold { + linux,code = <KEY_MUTE>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt new file mode 100644 index 000000000..f127a2117 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt @@ -0,0 +1,87 @@ +* Broadcom's IPROC Touchscreen Controller + +Required properties: +- compatible: must be "brcm,iproc-touchscreen" +- ts_syscon: handler of syscon node defining physical base + address of the controller and length of memory mapped region. + If this property is selected please make sure MFD_SYSCON config + is enabled in the defconfig file. +- clocks: The clock provided by the SOC to driver the tsc +- clock-names: name for the clock +- interrupts: The touchscreen controller's interrupt +- address-cells: Specify the number of u32 entries needed in child nodes. + Should set to 1. +- size-cells: Specify number of u32 entries needed to specify child nodes size + in reg property. Should set to 1. + +Optional properties: +- scanning_period: Time between scans. Each step is 1024 us. Valid 1-256. +- debounce_timeout: Each step is 512 us. Valid 0-255 +- settling_timeout: The settling duration (in ms) is the amount of time + the tsc waits to allow the voltage to settle after + turning on the drivers in detection mode. + Valid values: 0-11 + 0 = 0.008 ms + 1 = 0.01 ms + 2 = 0.02 ms + 3 = 0.04 ms + 4 = 0.08 ms + 5 = 0.16 ms + 6 = 0.32 ms + 7 = 0.64 ms + 8 = 1.28 ms + 9 = 2.56 ms + 10 = 5.12 ms + 11 = 10.24 ms +- touch_timeout: The continuous number of scan periods in which touch is + not detected before the controller returns to idle state. + Valid values 0-255. +- average_data: Number of data samples which are averaged before a final + data point is placed into the FIFO + Valid values 0-7 + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + 4 = 16 samples + 5 = 32 samples + 6 = 64 samples + 7 = 128 samples +- fifo_threshold: Interrupt is generated whenever the number of fifo + entries exceeds this value + Valid values 0-31 +- touchscreen-size-x: horizontal resolution of touchscreen (in pixels) +- touchscreen-size-y: vertical resolution of touchscreen (in pixels) +- touchscreen-fuzz-x: horizontal noise value of the absolute input + device (in pixels) +- touchscreen-fuzz-y: vertical noise value of the absolute input + device (in pixels) +- touchscreen-inverted-x: X axis is inverted (boolean) +- touchscreen-inverted-y: Y axis is inverted (boolean) + +Example: An example of touchscreen node + + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon","syscon"; + reg = <0x180a6000 0xc30>; + }; + + touchscreen: touchscreen@180a6000 { + compatible = "brcm,iproc-touchscreen"; + #address-cells = <1>; + #size-cells = <1>; + ts_syscon = <&ts_adc_syscon>; + clocks = <&adc_clk>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + + scanning_period = <5>; + debounce_timeout = <40>; + settling_timeout = <7>; + touch_timeout = <10>; + average_data = <5>; + fifo_threshold = <1>; + /* Touchscreen is rotated 180 degrees. */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt new file mode 100644 index 000000000..8daa0e868 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt @@ -0,0 +1,35 @@ +* Rohm BU21029 Touch Screen Controller + +Required properties: + - compatible : must be "rohm,bu21029" + - reg : i2c device address of the chip (0x40 or 0x41) + - interrupt-parent : the phandle for the gpio controller + - interrupts : (gpio) interrupt to which the chip is connected + - rohm,x-plate-ohms : x-plate resistance in Ohm + +Optional properties: + - reset-gpios : gpio pin to reset the chip (active low) + - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) + - touchscreen-size-y : vertical resolution of touchscreen (in pixels) + - touchscreen-max-pressure: maximum pressure value + - vdd-supply : power supply for the controller + +Example: + + &i2c1 { + /* ... */ + + bu21029: bu21029@40 { + compatible = "rohm,bu21029"; + reg = <0x40>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + rohm,x-plate-ohms = <600>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-max-pressure = <4095>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml new file mode 100644 index 000000000..74a8a01e0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChipOne ICN8318 Touchscreen Controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: chipone,icn8318 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wake-gpios: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - wake-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml new file mode 100644 index 000000000..afeab49a9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress CY8CTMA140 series touchscreen controller + +maintainers: + - Linus Walleij <linusw@kernel.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: cypress,cy8ctma140 + + reg: + const: 0x20 + + clock-frequency: + description: I2C client clock frequency, defined for host + minimum: 100000 + maximum: 400000 + + interrupts: + maxItems: 1 + + vcpin-supply: + description: Analog power supply regulator on VCPIN pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + touchscreen-max-pressure: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-max-pressure + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@20 { + compatible = "cypress,cy8ctma140"; + reg = <0x20>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + touchscreen-max-pressure = <255>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux2_reg>; + vcpin-supply = <&ab8500_ldo_aux2_reg>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml new file mode 100644 index 000000000..a0b8c1297 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress CY8CTMA340 series touchscreen controller + +description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after + the marketing name Cypress TrueTouch Standard Product) touchscreens can + be connected to either I2C or SPI buses. + +maintainers: + - Javier Martinez Canillas <javier@dowhile0.org> + - Linus Walleij <linusw@kernel.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + oneOf: + - const: cypress,cy8ctma340 + - const: cypress,cy8ctst341 + - const: cypress,cyttsp-spi + description: Legacy compatible for SPI connected CY8CTMA340 + deprecated: true + - const: cypress,cyttsp-i2c + description: Legacy compatible for I2C connected CY8CTMA340 + deprecated: true + + reg: + description: I2C address when used on the I2C bus, or the SPI chip + select index when used on the SPI bus + + clock-frequency: + description: I2C client clock frequency, defined for host when using + the device on the I2C bus + minimum: 0 + maximum: 400000 + + spi-max-frequency: + description: SPI clock frequency, defined for host, defined when using + the device on the SPI bus. The throughput is maximum 2 Mbps so the + typical value is 2000000, if higher rates are used the total throughput + needs to be restricted to 2 Mbps. + minimum: 0 + maximum: 6000000 + + interrupts: + description: Interrupt to host + maxItems: 1 + + vcpin-supply: + description: Analog power supply regulator on VCPIN pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + reset-gpios: + description: Reset line for the touchscreen, should be tagged + as GPIO_ACTIVE_LOW + + bootloader-key: + description: the 8-byte bootloader key that is required to switch + the chip from bootloader mode (default mode) to application mode + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 8 + maxItems: 8 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + + active-distance: + description: the distance in pixels beyond which a touch must move + before movement is detected and reported by the device + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + active-interval-ms: + description: the minimum period in ms between consecutive + scanning/processing cycles when the chip is in active mode + minimum: 0 + maximum: 255 + + lowpower-interval-ms: + description: the minimum period in ms between consecutive + scanning/processing cycles when the chip is in low-power mode + minimum: 0 + maximum: 2550 + + touch-timeout-ms: + description: minimum time in ms spent in the active power state while no + touches are detected before entering low-power mode + minimum: 0 + maximum: 2550 + + use-handshake: + description: enable register-based handshake (boolean). This should only + be used if the chip is configured to use 'blocking communication with + timeout' (in this case the device generates an interrupt at the end of + every scanning/processing cycle) + $ref: /schemas/types.yaml#/definitions/flag + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - bootloader-key + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + + touchscreen@0 { + compatible = "cypress,cy8ctma340"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + vdd-supply = <&ldo_aux1_reg>; + vcpin-supply = <&ldo_aux2_reg>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml new file mode 100644 index 000000000..037e5d3c4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress TT21000 touchscreen controller + +description: The Cypress TT21000 series (also known as "CYTTSP5" after + the marketing name Cypress TrueTouch Standard Product series 5). + +maintainers: + - Alistair Francis <alistair@alistair23.me> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: cypress,tt21000 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator for voltage. + + vddio-supply: + description: Optional Regulator for I/O voltage. + + reset-gpios: + maxItems: 1 + + linux,keycodes: + description: EV_ABS specific event code generated by the axis. + + wakeup-source: true + +patternProperties: + "^button@[0-9]+$": + type: object + $ref: ../input.yaml# + properties: + reg: + maxItems: 1 + linux,keycodes: + description: Keycode to emit + + required: + - reg + - linux,keycodes + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/linux-event-codes.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@24 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_reset_ds203>; + interrupt-parent = <&pio>; + interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + + button@0 { + reg = <0>; + linux,keycodes = <KEY_HOMEPAGE>; + }; + + button@1 { + reg = <1>; + linux,keycodes = <KEY_MENU>; + }; + + button@2 { + reg = <2>; + linux,keycodes = <KEY_BACK>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml new file mode 100644 index 000000000..68b2f1601 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FocalTech EDT-FT5x06 Polytouch + +description: | + There are 5 variants of the chip for various touch panel sizes + FT5206GE1 2.8" .. 3.8" + FT5306DE4 4.3" .. 7" + FT5406EE8 7" .. 8.9" + FT5506EEG 7" .. 8.9" + FT5726NEI 5.7” .. 11.6" + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + - if: + properties: + compatible: + contains: + enum: + - evervision,ev-ft5726 + + then: + properties: + offset-x: true + offset-y: true + +properties: + compatible: + oneOf: + - enum: + - edt,edt-ft5206 + - edt,edt-ft5306 + - edt,edt-ft5406 + - edt,edt-ft5506 + - evervision,ev-ft5726 + - focaltech,ft3518 + - focaltech,ft5426 + - focaltech,ft5452 + - focaltech,ft6236 + - focaltech,ft8201 + - focaltech,ft8716 + - focaltech,ft8719 + - items: + - const: focaltech,ft3519 + - const: focaltech,ft3518 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wake-gpios: + maxItems: 1 + + wakeup-source: true + + vcc-supply: true + iovcc-supply: true + + gain: + description: Allows setting the sensitivity in the range from 0 to 31. + Note that lower values indicate higher sensitivity. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + + offset: + description: Allows setting the edge compensation in the range from 0 to 31. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + + offset-x: + description: Same as offset, but applies only to the horizontal position. + Range from 0 to 80, only supported by evervision,ev-ft5726 devices. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 + + offset-y: + description: Same as offset, but applies only to the vertical position. + Range from 0 to 80, only supported by evervision,ev-ft5726 devices. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 + + report-rate-hz: + description: | + Allows setting the scan rate in Hertz. + M06 supports range from 30 to 140 Hz. + M12 supports range from 1 to 255 Hz. + minimum: 1 + maximum: 255 + + threshold: + description: Allows setting the "click"-threshold in the range from 0 to 255. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + interrupt-controller: true + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml new file mode 100644 index 000000000..930c70104 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/eeti,exc3000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EETI EXC3000 series touchscreen controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +properties: + compatible: + oneOf: + - const: eeti,exc3000 + - const: eeti,exc80h60 + - const: eeti,exc80h84 + - const: eeti,egalax_ts # Do NOT use for new binding + - const: eeti,exc3000-i2c + deprecated: true + - items: + - enum: + - eeti,exc81w32 + - const: eeti,exc80h84 + reg: + enum: [0x4, 0xa, 0x2a] + interrupts: + maxItems: 1 + reset-gpios: + maxItems: 1 + wakeup-gpios: + maxItems: 1 + vdd-supply: + description: Power supply regulator for the chip + attn-gpios: + deprecated: true + maxItems: 1 + description: Phandle to a GPIO to check whether interrupt is still + latched. This is necessary for platforms that lack + support for level-triggered IRQs. + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +allOf: + - $ref: touchscreen.yaml# + + - if: + properties: + compatible: + not: + contains: + enum: + - eeti,egalax_ts + - eeti,exc3000-i2c + then: + properties: + reg: + const: 0x2a + + wakeup-gpios: false + + attn-gpios: false + + required: + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include "dt-bindings/interrupt-controller/irq.h" + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@2a { + compatible = "eeti,exc3000"; + reg = <0x2a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml new file mode 100644 index 000000000..ff0ec3fd2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/elan,ektf2127.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elan eKTF2127 I2C touchscreen controller + +maintainers: + - Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - elan,ektf2127 + - elan,ektf2132 + - elan,ektf2232 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@15 { + compatible = "elan,ektf2127"; + reg = <0x15>; + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml new file mode 100644 index 000000000..3255c2c89 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elantech I2C Touchscreen + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + oneOf: + - enum: + - elan,ektf3624 + - elan,ekth3500 + - items: + - const: elan,ekth3915 + - const: elan,ekth3500 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: + type: boolean + description: touchscreen can be used as a wakeup source. + + reset-gpios: + maxItems: 1 + description: reset gpio the chip is connected to. + + vcc33-supply: + description: a phandle for the regulator supplying 3.3V power. + + vccio-supply: + description: a phandle for the regulator supplying IO power. + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + + interrupt-parent = <&gpio4>; + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx25-tcq.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx25-tcq.yaml new file mode 100644 index 000000000..94452ac42 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx25-tcq.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx25-tcq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale mx25 TS conversion queue module + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + mx25 touchscreen conversion queue module which controls the ADC unit of the + mx25 for attached touchscreens. + +properties: + compatible: + const: fsl,imx25-tcq + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,wires: + description: touch wires number. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [4, 5] + + fsl,pen-debounce-ns: + description: + Pen debounce time in nanoseconds. + + fsl,pen-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Pen-down threshold for the touchscreen. This is a value + between 1 and 4096. It is the ratio between the internal reference voltage + and the measured voltage after the plate was precharged. Resistance between + plates and therefore the voltage decreases with pressure so that a smaller + value is equivalent to a higher pressure. + + fsl,settling-time-ns: + description: + Settling time in nanoseconds. The settling time is before + the actual touch detection to wait for an even charge distribution in the + plate. + +allOf: + - $ref: touchscreen.yaml + +required: + - compatible + - reg + - interrupts + - fsl,wires + +unevaluatedProperties: false + +examples: + - | + touchscreen@50030400 { + compatible = "fsl,imx25-tcq"; + reg = <0x50030400 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <0>; + fsl,wires = <4>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml new file mode 100644 index 000000000..a99280aef --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6UL Touch Controller + +maintainers: + - Haibo Chen <haibo.chen@nxp.com> + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +properties: + compatible: + const: fsl,imx6ul-tsc + + reg: + items: + - description: touch controller address + - description: ADC2 address + + interrupts: + items: + - description: touch controller address + - description: ADC2 address + + clocks: + maxItems: 2 + + clock-names: + items: + - const: tsc + - const: adc + + xnur-gpios: + maxItems: 1 + description: + The X- gpio this controller connect to. This xnur-gpio returns to + low once the finger leave the touch screen (The last touch event + the touch controller capture). + + measure-delay-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The value of measure delay time. Before X-axis or Y-axis measurement, + the screen need some time before even potential distribution ready. + default: 0xffff + minimum: 0 + maximum: 0xffffff + + pre-charge-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The touch screen need some time to precharge. + default: 0xfff + minimum: 0 + maximum: 0xffffffff + + touchscreen-average-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of data samples which are averaged for each read. + enum: [ 1, 4, 8, 16, 32 ] + + debounce-delay-us: + description: | + Minimum duration in microseconds a signal must remain stable + to be considered valid. + + Drivers must convert this value to IPG clock cycles and map + it to one of the four discrete thresholds exposed by the + TSC_DEBUG_MODE2 register: + + 0: 8191 IPG cycles + 1: 4095 IPG cycles + 2: 2047 IPG cycles + 3: 1023 IPG cycles + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - xnur-gpios + +allOf: + - $ref: touchscreen.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6ul-clock.h> + #include <dt-bindings/gpio/gpio.h> + touchscreen@2040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xfff>; + pre-charge-time = <0xffff>; + touchscreen-average-samples = <32>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml new file mode 100644 index 000000000..c40d92b7f --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix Berlin series touchscreen controller + +description: The Goodix Berlin series of touchscreen controllers + be connected to either I2C or SPI buses. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - goodix,gt9897 + - goodix,gt9916 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vddio-supply: + description: power supply regulator on VDDIO pin + + spi-max-frequency: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@5d { + compatible = "goodix,gt9916"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + spi-max-frequency = <1000000>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml new file mode 100644 index 000000000..a26a54d63 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix GT9xx series touchscreen controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - goodix,gt1151 + - goodix,gt1158 + - goodix,gt5663 + - goodix,gt5688 + - goodix,gt911 + - goodix,gt9110 + - goodix,gt912 + - goodix,gt9147 + - goodix,gt917s + - goodix,gt927 + - goodix,gt9271 + - goodix,gt928 + - goodix,gt9286 + - goodix,gt967 + + reg: + enum: [ 0x5d, 0x14 ] + + interrupts: + maxItems: 1 + + irq-gpios: + description: GPIO pin used for IRQ input. Additionally, this line is + sampled by the device on reset deassertion to select the I2C client + address, thus it can be driven by the host during the reset sequence. + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + + AVDD28-supply: + description: Analog power supply regulator on AVDD28 pin + + VDDIO-supply: + description: GPIO power supply regulator on VDDIO pin + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <0 0>; + irq-gpios = <&gpio1 0 0>; + reset-gpios = <&gpio1 1 0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt new file mode 100644 index 000000000..a47c36190 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -0,0 +1,41 @@ +* HiDeep Finger and Stylus touchscreen controller + +Required properties: +- compatible : must be "hideep,hideep-ts" +- reg : I2C slave address, (e.g. 0x6C). +- interrupts : Interrupt to which the chip is connected. + +Optional properties: +- vdd-supply : It is the controller supply for controlling + main voltage(3.3V) through the regulator. +- vid-supply : It is the controller supply for controlling + IO voltage(1.8V) through the regulator. +- reset-gpios : Define for reset gpio pin. + It is to use for reset IC. +- touchscreen-size-x : X axis size of touchscreen +- touchscreen-size-y : Y axis size of touchscreen +- linux,keycodes : Specifies an array of numeric keycode values to + be used for reporting button presses. The array can + contain up to 3 entries. + +Example: + +#include "dt-bindings/input/input.h" + +i2c@00000000 { + + /* ... */ + + touchscreen@6c { + compatible = "hideep,hideep-ts"; + reg = <0x6c>; + interrupt-parent = <&gpx1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&ldo15_reg>; + vid-supply = <&ldo18_reg>; + reset-gpios = <&gpx1 5 0>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + linux,keycodes = <KEY_HOME>, <KEY_MENU>, <KEY_BACK>; + }; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml new file mode 100644 index 000000000..40a608801 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/himax,hx852es.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX852x(ES) touch panel controller + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + items: + - enum: + - himax,hx8525e + - himax,hx8526e + - himax,hx8527e + - const: himax,hx852es + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: Touch Screen Interrupt (TSIX), active low + + reset-gpios: + maxItems: 1 + description: External Reset (XRES), active low + + vcca-supply: + description: Analog power supply (VCCA) + + vccd-supply: + description: Digital power supply (VCCD) + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + + linux,keycodes: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + - interrupts + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "himax,hx8527e", "himax,hx852es"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + vcca-supply = <®_ts_vcca>; + vccd-supply = <&pm8916_l6>; + linux,keycodes = <KEY_BACK KEY_HOMEPAGE KEY_APPSELECT>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml new file mode 100644 index 000000000..874c0781c --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hycon HY46XX series touchscreen controller + +description: | + There are 6 variants of the chip for various touch panel sizes and cover lens material + Glass: 0.3mm--4.0mm + PET/PMMA: 0.2mm--2.0mm + HY4613(B)-N048 < 6" + HY4614(B)-N068 7" .. 10.1" + HY4621-NS32 < 5" + HY4623-NS48 5.1" .. 7" + Glass: 0.3mm--8.0mm + PET/PMMA: 0.2mm--4.0mm + HY4633(B)-N048 < 6" + HY4635(B)-N048 < 7" .. 10.1" + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - hycon,hy4613 + - hycon,hy4614 + - hycon,hy4621 + - hycon,hy4623 + - hycon,hy4633 + - hycon,hy4635 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vcc-supply: true + + hycon,threshold: + description: Allows setting the sensitivity in the range from 0 to 255. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + hycon,glove-enable: + type: boolean + description: Allows enabling glove setting. + + hycon,report-speed-hz: + description: Allows setting the report speed in Hertz. + minimum: 1 + maximum: 255 + + hycon,noise-filter-enable: + type: boolean + description: Allows enabling power noise filter. + + hycon,filter-data: + description: Allows setting how many samples throw before reporting touch + in the range from 0 to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + + hycon,gain: + description: Allows setting the sensitivity distance in the range from 0 to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + + hycon,edge-offset: + description: Allows setting the edge compensation in the range from 0 to 16. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 16 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + interrupt-controller: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@1c { + compatible = "hycon,hy4633"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml new file mode 100644 index 000000000..72d4da636 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cst816x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hynitron CST816x Series Capacitive Touch controller + +maintainers: + - Oleh Kuzhylnyi <kuzhylol@gmail.com> + +description: | + Bindings for CST816x high performance self-capacitance touch chip series + with single point gesture and real two-point operation. + +properties: + compatible: + enum: + - hynitron,cst816s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + linux,keycodes: + minItems: 1 + items: + - description: Slide up gesture + - description: Slide down gesture + - description: Slide left gesture + - description: Slide right gesture + - description: Long press gesture + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@15 { + compatible = "hynitron,cst816s"; + reg = <0x15>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_LEFT>, <KEY_RIGHT>, + <BTN_TOOL_TRIPLETAP>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml new file mode 100644 index 000000000..c47d7752a --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ilitek,ili210x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI21xx/ILI251x V3/V6 touch screen controller with i2c interface + +maintainers: + - Frank Li <Frank.Li@nxp.com> + - Marek Vasut <marek.vasut+renesas@mailbox.org> + +properties: + compatible: + enum: + - ilitek,ili210x + - ilitek,ili2117 + - ilitek,ili2120 + - ilitek,ili251x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: true + +required: + - compatible + - reg + +allOf: + - $ref: touchscreen.yaml + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili2120"; + reg = <0x41>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml new file mode 100644 index 000000000..dfaffbc39 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagis IST30XXC family touchscreen controller + +maintainers: + - Markuss Broks <markuss.broks@gmail.com> + +properties: + $nodename: + pattern: "^touchscreen@[0-9a-f]+$" + + compatible: + enum: + - imagis,ist3032c + - imagis,ist3038 + - imagis,ist3038b + - imagis,ist3038c + - imagis,ist3038h + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Power supply regulator for the chip + + vddio-supply: + description: Power supply regulator for the I2C bus + + linux,keycodes: + description: Keycodes for the touch keys + minItems: 2 + maxItems: 5 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +allOf: + - $ref: touchscreen.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - imagis,ist3032c + - imagis,ist3038 + then: + properties: + linux,keycodes: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@50 { + compatible = "imagis,ist3038c"; + reg = <0x50>; + interrupt-parent = <&gpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo1_reg>; + vddio-supply = <&ldo2_reg>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + touchscreen-fuzz-x = <10>; + touchscreen-fuzz-y = <10>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + }; + - | + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@50 { + compatible = "imagis,ist3032c"; + reg = <0x50>; + interrupt-parent = <&gpio>; + interrupts = <72 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + linux,keycodes = <KEY_APPSELECT>, <KEY_BACK>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml new file mode 100644 index 000000000..314be65c5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/melfas,mip4_ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MELFAS MIP4 Touchscreen + +maintainers: + - Ariel D'Alessandro <ariel.dalessandro@collabora.com> + +properties: + compatible: + const: melfas,mip4_ts + + reg: + description: I2C address of the chip (0x48 or 0x34) + maxItems: 1 + + interrupts: + maxItems: 1 + + ce-gpios: + description: + GPIO connected to the CE (chip enable) pin of the chip (active high) + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml new file mode 100644 index 000000000..a8a93f755 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Melfas MMS114 family touchscreen controller + +maintainers: + - Linus Walleij <linusw@kernel.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + oneOf: + - enum: + - melfas,mms114 + - melfas,mms134s + - melfas,mms136 + - melfas,mms152 + - melfas,mms345l + - items: + - enum: + - melfas,mms252 + - const: melfas,mms114 + + reg: + description: I2C address + + clock-frequency: + description: I2C client clock frequency, defined for host + minimum: 100000 + maximum: 400000 + + interrupts: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-fuzz-pressure: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + touchscreen-max-pressure: true + + linux,keycodes: + description: Keycodes for the touch keys + minItems: 1 + maxItems: 15 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&ldo1_reg>; + vdd-supply = <&ldo2_reg>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + touchscreen-fuzz-x = <10>; + touchscreen-fuzz-y = <10>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml new file mode 100644 index 000000000..ddbbc820c --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar msg2638 touchscreen controller + +maintainers: + - Vincent Knecht <vincent.knecht@mailoo.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - mstar,msg2138 + - mstar,msg2638 + + reg: + const: 0x26 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: Power supply regulator for the chip + + vddio-supply: + description: Power supply regulator for the I2C bus + + touchscreen-size-x: true + touchscreen-size-y: true + + linux,keycodes: + minItems: 1 + maxItems: 4 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@26 { + compatible = "mstar,msg2638"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <2048>; + touchscreen-size-y = <2048>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml new file mode 100644 index 000000000..c2ee89b76 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Neonode infrared touchscreen controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: neonode,zforce + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + irq-gpios: + maxItems: 1 + + x-size: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + y-size: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-supply: true + +required: + - compatible + - reg + - interrupts + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@50 { + compatible = "neonode,zforce"; + reg = <0x50>; + interrupts = <2 0>; + vdd-supply = <®_zforce_vdd>; + + reset-gpios = <&gpio5 9 0>; /* RST */ + irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ + + touchscreen-min-x = <0>; + touchscreen-size-x = <800>; + touchscreen-min-y = <0>; + touchscreen-size-y = <600>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/novatek,nvt-ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/novatek,nvt-ts.yaml new file mode 100644 index 000000000..bd6a60486 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/novatek,nvt-ts.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/novatek,nvt-ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NVT Touchscreen Controller + +maintainers: + - Hans de Goede <hdegoede@redhat.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - novatek,nt11205-ts + - novatek,nt36672a-ts + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vcc-supply: true + iovcc-supply: true + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@1 { + compatible = "novatek,nt36672a-ts"; + reg = <0x01>; + interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l22a_2p85>; + iovcc-supply = <&vreg_l14a_1p8>; + pinctrl-0 = <&ts_int_default &ts_reset_default>; + pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>; + pinctrl-names = "default", "sleep"; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2246>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml new file mode 100644 index 000000000..b6feda127 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/nxp,lpc3220-tsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx SoC Touchscreen Controller (TSC) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc3220-tsc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc32xx-clock.h> + + touchscreen@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + clocks = <&clk LPC32XX_CLK_ADC>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml new file mode 100644 index 000000000..3305eda5e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pixcir Touchscreen Controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - pixcir,pixcir_ts + - pixcir,pixcir_tangoc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + attb-gpio: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + wake-gpios: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - attb-gpio + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "pixcir,pixcir_ts"; + reg = <0x5c>; + interrupts = <2 0>; + attb-gpio = <&gpf 2 0 2>; + touchscreen-size-x = <800>; + touchscreen-size-y = <600>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml new file mode 100644 index 000000000..059d419f6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic resistive touchscreen ADC + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Generic ADC based resistive touchscreen controller + The device must be connected to an ADC device that provides channels for + position measurement and optional pressure. + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: resistive-adc-touch + + io-channels: + minItems: 2 + items: + - description: x + - description: y + - description: pressure (optional) + - description: z1 (optional) + - description: z2 (optional) + + io-channel-names: + oneOf: + - items: + - enum: [x, y] + - enum: [x, y] + - items: + - enum: [x, y, pressure] + - enum: [x, y, pressure] + - enum: [x, y, pressure] + - items: + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + - enum: [x, y, z1, z2] + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + touchscreen-min-pressure: true + touchscreen-x-plate-ohms: true + +unevaluatedProperties: false + +required: + - compatible + - io-channels + - io-channel-names + +examples: + - | + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc 24>, <&adc 25>; + io-channel-names = "y", "x"; + }; + - | + touchscreen { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 24>, <&adc 25>, <&adc 26>; + io-channel-names = "y", "pressure", "x"; + }; + - | + touchscreen { + compatible = "resistive-adc-touch"; + touchscreen-min-pressure = <50000>; + io-channels = <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + io-channel-names = "x", "z1", "z2", "y"; + touchscreen-x-plate-ohms = <800>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml b/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml new file mode 100644 index 000000000..adea2c4ed --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/rohm,bu21013.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rohm BU21013 touchscreen + +description: + Rohm BU21013 I2C driven touchscreen controller. + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - rohm,bu21013_tp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + touch-gpios: + maxItems: 1 + description: GPIO registering a touch event. + + avdd-supply: + description: Analogic power supply + + rohm,touch-max-x: + deprecated: true + description: Maximum value on the X axis. + $ref: /schemas/types.yaml#/definitions/uint32 + + rohm,touch-max-y: + deprecated: true + description: Maximum value on the Y axis. + $ref: /schemas/types.yaml#/definitions/uint32 + + rohm,flip-x: + deprecated: true + description: Flip touch coordinates on the X axis + type: boolean + + rohm,flip-y: + deprecated: true + description: Flip touch coordinates on the Y axis + type: boolean + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - reset-gpios + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "rohm,bu21013_tp"; + reg = <0x5c>; + + interrupt-parent = <&gpio2>; + interrupts = <0x20 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + touchscreen-size-x = <384>; + touchscreen-size-y = <704>; + touchscreen-inverted-y; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml new file mode 100644 index 000000000..1ffd17af3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/samsung,s6sy761.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6SY761 touchscreen controller + +maintainers: + - Andi Shyti <andi.shyti@kernel.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: samsung,s6sy761 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + avdd-supply: true + vdd-supply: true + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - vdd-supply + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml new file mode 100644 index 000000000..5381a96f4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silead GSL1680 Touchscreen Controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - silead,gsl1680 + - silead,gsl1688 + - silead,gsl3670 + - silead,gsl3675 + - silead,gsl3692 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-gpios: + maxItems: 1 + + firmware-name: + maxItems: 1 + description: > + File basename for board specific firmware + + silead,max-fingers: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 5 + description: > + Maximum number of fingers the touchscreen can detect + + silead,home-button: + type: boolean + description: > + Does the device have a capacitive home-button build into the + touchscreen? + + avdd-supply: + description: > + Regulator phandle for controller AVDD + + vddio-supply: + description: > + Regulator phandle for controller VDDIO + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - power-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + silead,max-fingers = <5>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt new file mode 100644 index 000000000..8f5322e01 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt @@ -0,0 +1,31 @@ +* SiS I2C Multiple Touch Controller + +Required properties: +- compatible: must be "sis,9200-ts" +- reg: i2c slave address +- interrupts: touch controller interrupt (see interrupt + binding [0]) + +Optional properties: +- pinctrl-names: should be "default" (see pinctrl binding [1]). +- pinctrl-0: a phandle pointing to the pin settings for the + device (see pinctrl binding [1]). +- attn-gpios: the gpio pin used as attention line +- reset-gpios: the gpio pin used to reset the controller +- wakeup-source: touchscreen can be used as a wakeup source + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example: + + sis9255@5c { + compatible = "sis,9200-ts"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sis>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml new file mode 100644 index 000000000..fe1fa217d --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/sitronix,st1232.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix st1232 or st1633 touchscreen controller + +maintainers: + - Bastian Hecht <hechtb@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + oneOf: + - enum: + - sitronix,st1232 + - sitronix,st1633 + - items: + - const: sitronix,st1624 + - const: sitronix,st1633 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpios: + description: A phandle to the reset GPIO + maxItems: 1 + + wakeup-source: + type: boolean + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/linux-event-codes.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupts = <2 0>; + gpios = <&gpio1 166 0>; + wakeup-source; + + touch-overlay { + segment-0 { + label = "Touchscreen"; + x-origin = <0>; + x-size = <240>; + y-origin = <40>; + y-size = <280>; + }; + + segment-1a { + label = "Camera light"; + linux,code = <KEY_LIGHTS_TOGGLE>; + x-origin = <40>; + x-size = <40>; + y-origin = <0>; + y-size = <40>; + }; + + segment-2a { + label = "Power"; + linux,code = <KEY_POWER>; + x-origin = <160>; + x-size = <40>; + y-origin = <0>; + y-size = <40>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml new file mode 100644 index 000000000..64c4f24ea --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/st,stmfts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Microelectronics FingerTip touchscreen controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + The ST-Microelectronics FingerTip device provides a basic touchscreen + functionality. Along with it the user can enable the touchkey which can work + as a basic HOME and BACK key for phones. + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: st,stmfts + + reg: + maxItems: 1 + + avdd-supply: + description: Analogic power supply + + interrupts: + maxItems: 1 + + ledvdd-supply: + description: Power supply to the touch key leds + + touch-key-connected: + type: boolean + description: The touchkey feature is connected + + vdd-supply: + description: Power supply + + reset-gpios: + description: Reset GPIO (active-low) + maxItems: 1 + +required: + - compatible + - reg + - avdd-supply + - interrupts + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@49 { + compatible = "st,stmfts"; + reg = <0x49>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <1599>; + touchscreen-size-y = <2559>; + touch-key-connected; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + ledvdd-supply = <&ldo33_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/technologic,ts4800-ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/technologic,ts4800-ts.yaml new file mode 100644 index 000000000..c033774b4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/technologic,ts4800-ts.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/technologic,ts4800-ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TS-4800 Touchscreen + +maintainers: + - Eduard Bostina <egbostina@gmail.com> + +properties: + compatible: + const: technologic,ts4800-ts + + reg: + maxItems: 1 + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the FPGA's syscon + - description: Offset to the touchscreen register + - description: Offset to the touchscreen enable bit + description: Phandle / integers array that points to the syscon node which + describes the FPGA's syscon registers. + +required: + - compatible + - reg + - syscon + +additionalProperties: false + +examples: + - | + touchscreen@1000 { + compatible = "technologic,ts4800-ts"; + reg = <0x1000 0x100>; + syscon = <&fpga_syscon 0x20 3>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml new file mode 100644 index 000000000..1b58fc263 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti,ads7843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI's SPI driven touch screen controllers + +maintainers: + - Alexander Stein <alexander.stein@ew.tq-group.com> + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + - Marek Vasut <marex@denx.de> + +description: + TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046 SPI driven touch screen + controllers. + +properties: + compatible: + enum: + - ti,ads7843 + - ti,ads7845 + - ti,ads7846 + - ti,ads7873 + - ti,tsc2046 + + interrupts: + maxItems: 1 + + pendown-gpio: + maxItems: 1 + description: + GPIO handle describing the pin the !PENIRQ line is connected to. + + vcc-supply: + description: + A regulator node for the supply voltage. + + wakeup-source: true + + ti,debounce-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Max number of additional readings per sample. + + ti,debounce-rep: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Additional consecutive good readings required after the first two. + + ti,debounce-tol: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Tolerance used for filtering. + + ti,hsync-gpios: + maxItems: 1 + description: + GPIO line to poll for hsync. + + ti,keep-vref-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set to keep Vref on for differential measurements as well. + + ti,pendown-gpio-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Platform specific debounce time for the pendown-gpio. + + ti,penirq-recheck-delay-usecs: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + If set to non-zero, after samples are taken this delay is applied and + penirq is rechecked, to help avoid false events. This value is + affected by the material used to build the touch layer. + + ti,pressure-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Maximum reported pressure value. + + ti,pressure-min: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Minimum reported pressure value (threshold). + + ti,settle-delay-usec: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Settling time of the analog signals; a function of Vcc and the + capacitance on the X/Y drivers. If set to non-zero, two samples are + taken with settle_delay us apart, and the second one is used. ~150 + uSec with 0.01uF caps. + + ti,swap-xy: + deprecated: true + $ref: /schemas/types.yaml#/definitions/flag + description: + Swap x and y axis. + + ti,vref-delay-usecs: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Vref supply delay in usecs, 0 for external Vref. + + ti,vref-mv: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + The VREF voltage, in millivolts. + Set to 0 to use internal references (ADS7846). + + ti,x-plate-ohms: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Resistance of the X-plate, in Ohms. + + ti,x-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Maximum value on the X axis. + + ti,x-min: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Minimum value on the X axis. + + ti,y-plate-ohms: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Resistance of the Y-plate, in Ohms. + + ti,y-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Maximum value on the Y axis. + + ti,y-min: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Minimum value on the Y axis. + +required: + - compatible + - reg + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi{ + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "ti,tsc2046"; + reg = <0>; /* CS0 */ + interrupt-parent = <&gpio1>; + interrupts = <8 0>; /* BOOT6 / GPIO 8 */ + pendown-gpio = <&gpio1 8 0>; + spi-max-frequency = <1000000>; + vcc-supply = <®_vcc3>; + wakeup-source; + + ti,pressure-max = /bits/ 16 <255>; + ti,x-max = /bits/ 16 <8000>; + ti,x-min = /bits/ 16 <0>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,y-max = /bits/ 16 <4800>; + ti,y-min = /bits/ 16 <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml new file mode 100644 index 000000000..e44cc65ab --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM3359 Touchscreen controller + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + const: ti,am3359-tsc + + ti,wires: + description: Wires refer to application modes i.e. 4/5/8 wire touchscreen + support on the platform. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [4, 5, 8] + + ti,x-plate-resistance: + description: X plate resistance + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,coordinate-readouts: + description: The sequencer supports a total of 16 programmable steps. Each + step is used to read a single coordinate. A single readout is enough but + multiple reads can increase the quality. A value of 5 means, 5 reads for + X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps + available. The remaining 4 can be used by the ADC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 6 + + ti,wire-config: + description: Different boards could have a different order for connecting + wires on touchscreen. We need to provide an 8-bit number where the + first four bits represent the analog lines and the next 4 bits represent + positive/negative terminal on that input line. Notations to represent the + input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1 + and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 8 + + ti,charge-delay: + description: Length of touch screen charge delay step in terms of ADC clock + cycles. Charge delay value should be large in order to avoid false pen-up + events. This value effects the overall sampling speed, hence need to be + kept as low as possible, while avoiding false pen-up event. Start from a + lower value, say 0x400, and increase value until false pen-up events are + avoided. The pen-up detection happens immediately after the charge step, + so this does in fact function as a hardware knob for adjusting the amount + of "settling time". + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - ti,wires + - ti,x-plate-resistance + - ti,coordinate-readouts + - ti,wire-config + +additionalProperties: false + +examples: + - | + tsc { + compatible = "ti,am3359-tsc"; + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + ti,charge-delay = <0x400>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml new file mode 100644 index 000000000..7187c390b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TSC2004 and TSC2005 touchscreen controller + +maintainers: + - Marek Vasut <marex@denx.de> + - Michael Welling <mwelling@ieee.org> + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + enum: + - ti,tsc2004 + - ti,tsc2005 + + reg: + maxItems: 1 + description: | + I2C address when used on the I2C bus, or the SPI chip select index + when used on the SPI bus + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO specifier for the controller reset line + + spi-max-frequency: + description: TSC2005 SPI bus clock frequency. + maximum: 25000000 + + ti,x-plate-ohms: + description: resistance of the touchscreen's X plates in ohm (defaults to 280) + + ti,esd-recovery-timeout-ms: + description: | + if the touchscreen does not respond after the configured time + (in milli seconds), the driver will reset it. This is disabled + by default. + + vio-supply: + description: Regulator specifier + + touchscreen-fuzz-pressure: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-max-pressure: true + touchscreen-size-x: true + touchscreen-size-y: true + +allOf: + - $ref: touchscreen.yaml# + - if: + properties: + compatible: + contains: + const: ti,tsc2004 + then: + properties: + spi-max-frequency: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>; + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@0 { + compatible = "ti,tsc2005"; + spi-max-frequency = <6000000>; + reg = <0>; + + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml new file mode 100644 index 000000000..d9cb53e86 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2007.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments tsc2007 touchscreen controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: ti,tsc2007 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,x-plate-ohms: + description: X-plate resistance in ohms. + + gpios: true + + pendown-gpio: true + + wakeup-source: true + + ti,max-rt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum pressure. + + ti,fuzzx: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + specifies the absolute input fuzz x value. + If set, it will permit noise in the data up to +- the value given to the fuzz + parameter, that is used to filter noise from the event stream. + + ti,fuzzy: + $ref: /schemas/types.yaml#/definitions/uint32 + description: specifies the absolute input fuzz y value. + + ti,fuzzz: + $ref: /schemas/types.yaml#/definitions/uint32 + description: specifies the absolute input fuzz z value. + + ti,poll-period: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + how much time to wait (in milliseconds) before reading again the + values from the tsc2007. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - ti,x-plate-ohms + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touch@49 { + compatible = "ti,tsc2007"; + reg = <0x49>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 0x8>; + gpios = <&gpio4 0 0>; + ti,x-plate-ohms = <180>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml new file mode 100644 index 000000000..5094c5183 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/toradex,vf50-touchscreen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toradex Colibri VF50 Touchscreen + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + - Sanchayan Maity <maitysanchayan@gmail.com> + +properties: + compatible: + const: toradex,vf50-touchscreen + + interrupts: + maxItems: 1 + + io-channels: + maxItems: 4 + description: + adc channels being used by the Colibri VF50 module + IIO ADC for Y-, X-, Y+, X+ connections + + xp-gpios: + description: FET gate driver for input of X+ + + xm-gpios: + description: FET gate driver for input of X- + + yp-gpios: + description: FET gate driver for input of Y+ + + ym-gpios: + description: FET gate driver for input of Y- + + vf50-ts-min-pressure: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 50 + maximum: 2000 + description: pressure level at which to stop measuring X/Y values + +required: + - compatible + - io-channels + - xp-gpios + - xm-gpios + - yp-gpios + - ym-gpios + - interrupts + - vf50-ts-min-pressure + +allOf: + - $ref: touchscreen.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + touchscreen { + compatible = "toradex,vf50-touchscreen"; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + io-channels = <&adc1 0>, <&adc0 0>, <&adc0 1>, <&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "idle", "default"; + pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>; + pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>; + vf50-ts-min-pressure = <200>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml new file mode 100644 index 000000000..7023e8c73 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common touchscreen + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +properties: + panel: + description: If this touchscreen is integrally connected to a panel, this + is a reference to that panel. The presence of this reference indicates + that the touchscreen should be power sequenced together with the panel + and that they may share power and/or reset signals. + $ref: /schemas/types.yaml#/definitions/phandle + + touchscreen-min-x: + description: minimum x coordinate reported + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + touchscreen-min-y: + description: minimum y coordinate reported + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + touchscreen-size-x: + description: horizontal resolution of touchscreen (maximum x coordinate reported + 1) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-size-y: + description: vertical resolution of touchscreen (maximum y coordinate reported + 1) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-max-pressure: + description: maximum reported pressure (arbitrary range dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-min-pressure: + description: minimum pressure on the touchscreen to be achieved in order + for the touchscreen driver to report a touch event. + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-x: + description: horizontal noise value of the absolute input device (in pixels) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-y: + description: vertical noise value of the absolute input device (in pixels) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-pressure: + description: pressure noise value of the absolute input device (arbitrary + range dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-average-samples: + description: Number of data samples which are averaged for each read (valid + values dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-inverted-x: + description: X axis is inverted + type: boolean + + touchscreen-inverted-y: + description: Y axis is inverted + type: boolean + + touchscreen-swapped-x-y: + description: X and Y axis are swapped + Swapping is done after inverting the axis + type: boolean + + touchscreen-x-mm: + description: horizontal length in mm of the touchscreen + + touchscreen-y-mm: + description: vertical length in mm of the touchscreen + + touchscreen-x-plate-ohms: + description: Resistance of the X-plate in Ohms + + touchscreen-y-plate-ohms: + description: Resistance of the Y-plate in Ohms + + touch-overlay: + description: | + List of nodes defining segments (touch areas) on the touchscreen. + + This object can be used to describe a series of segments to restrict + the region within touch events are reported or buttons with a specific + functionality. + + This is of special interest if the touchscreen is shipped with a physical + overlay on top of it with a frame that hides some part of the original + touchscreen area. Printed buttons on that overlay are also a typical + use case. + + A new touchscreen area is defined as a sub-node without a key code. If a + key code is defined in the sub-node, it will be interpreted as a button. + + The x-origin and y-origin properties of a touchscreen area define the + offset of a new origin from where the touchscreen events are referenced. + This offset is applied to the events accordingly. The x-size and y-size + properties define the size of the touchscreen effective area. + + The following example shows a new touchscreen area with the new origin + (0',0') for the touch events generated by the device. + + Touchscreen (full area) + ┌────────────────────────────────────────┐ + │ ┌───────────────────────────────┐ │ + │ │ │ │ + │ ├ y-size │ │ + │ │ │ │ + │ │ touchscreen area │ │ + │ │ (no key code) │ │ + │ │ │ │ + │ │ x-size │ │ + │ ┌└──────────────┴────────────────┘ │ + │(0',0') │ + ┌└────────────────────────────────────────┘ + (0,0) + + where (0',0') = (0+x-origin,0+y-origin) + + Sub-nodes with key codes report the touch events on their surface as key + events instead. + + The following example shows a touchscreen with a single button on it. + + Touchscreen (full area) + ┌───────────────────────────────────┐ + │ │ + │ │ + │ ┌─────────┐ │ + │ │button 0 │ │ + │ │KEY_POWER│ │ + │ └─────────┘ │ + │ │ + │ │ + ┌└───────────────────────────────────┘ + (0,0) + + Segments defining buttons and clipped toushcreen areas can be combined + as shown in the following example. + In that case only the events within the touchscreen area are reported + as touch events. Events within the button areas report their associated + key code. Any events outside the defined areas are ignored. + + Touchscreen (full area) + ┌─────────┬──────────────────────────────┐ + │ │ │ + │ │ ┌───────────────────────┐ │ + │ button 0│ │ │ │ + │KEY_POWER│ │ │ │ + │ │ │ │ │ + ├─────────┤ │ touchscreen area │ │ + │ │ │ (no key code) │ │ + │ │ │ │ │ + │ button 1│ │ │ │ + │ KEY_INFO│ ┌└───────────────────────┘ │ + │ │(0',0') │ + ┌└─────────┴──────────────────────────────┘ + (0,0) + + type: object + + patternProperties: + '^segment-': + type: object + description: + Each segment is represented as a sub-node. + properties: + x-origin: + description: horizontal origin of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + y-origin: + description: vertical origin of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + x-size: + description: horizontal resolution of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + y-size: + description: vertical resolution of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + label: + description: descriptive name of the segment + $ref: /schemas/types.yaml#/definitions/string + + linux,code: true + + required: + - x-origin + - y-origin + - x-size + - y-size + + unevaluatedProperties: false + + debounce-delay-us: + description: Minimum duration in microseconds a signal must remain stable + to be considered valid. + +dependencies: + touchscreen-size-x: [ touchscreen-size-y ] + touchscreen-size-y: [ touchscreen-size-x ] + touchscreen-x-mm: [ touchscreen-y-mm ] + touchscreen-y-mm: [ touchscreen-x-mm ] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/touchscreen/trivial-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/trivial-touch.yaml new file mode 100644 index 000000000..6316a8d32 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/trivial-touch.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/trivial-touch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial touch screen controller with i2c interface + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + # The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers + - azoteq,iqs550 + - azoteq,iqs572 + - azoteq,iqs525 + # Himax hx83100a touchscreen controller + - himax,hx83100a + # Himax hx83112b touchscreen controller + - himax,hx83112b + # Hynitron cstxxx series touchscreen controller + - hynitron,cst340 + # Ilitek I2C Touchscreen Controller + - ilitek,ili2130 + - ilitek,ili2131 + - ilitek,ili2132 + - ilitek,ili2316 + - ilitek,ili2322 + - ilitek,ili2323 + - ilitek,ili2326 + - ilitek,ili2520 + - ilitek,ili2521 + # MAXI MAX11801 Resistive touch screen controller with i2c interface + - maxim,max11801 + # Microchip AR1020 and AR1021 touchscreen interface (I2C) + - microchip,ar1021-i2c + # Trivial touch screen controller with i2c interface + - semtech,sx8650 + - semtech,sx8654 + - semtech,sx8655 + - semtech,sx8656 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: true + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: touchscreen.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml b/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml new file mode 100644 index 000000000..6d1da6a43 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/wacom,w9007a-lt03.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wacom W9000-series penabled I2C touchscreen + +maintainers: + - Hendrik Noack <hendrik-noack@gmx.de> + +description: | + The W9000-series are penabled touchscreen controllers by Wacom. + + The firmware of controllers in different devices may differ. This can also + affect the controller's behavior. + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - wacom,w9002 + - wacom,w9007a-lt03 + - wacom,w9007a-v1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + + flash-mode-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + digitizer@56 { + compatible = "wacom,w9007a-lt03"; + reg = <0x56>; + interrupt-parent = <&gpd1>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&stylus_reg>; + + flash-mode-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; + + touchscreen-x-mm = <216>; + touchscreen-y-mm = <135>; + touchscreen-inverted-x; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml b/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml new file mode 100644 index 000000000..d5e132ec0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/zeitec,zet6223.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zeitec ZET6223 touchscreen controller + +description: + Zeitec ZET6223 I2C driven touchscreen controller. + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - zeitec,zet6223 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vio-supply: + description: 1.8V or 3.3V VIO supply. + + vcc-supply: + description: 3.3V VCC supply. + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@76 { + compatible = "zeitec,zet6223"; + reg = <0x76>; + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml new file mode 100644 index 000000000..f1ce837b1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zinitix BT4xx and BT5xx series touchscreen controller + +description: The Zinitix BT4xx and BT5xx series of touchscreen controllers + are Korea-produced touchscreens with embedded microcontrollers. The + BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014. + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + - Linus Walleij <linusw@kernel.org> + +allOf: + - $ref: touchscreen.yaml# + - $ref: ../input.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + enum: + - zinitix,bt402 + - zinitix,bt403 + - zinitix,bt404 + - zinitix,bt412 + - zinitix,bt413 + - zinitix,bt431 + - zinitix,bt432 + - zinitix,bt531 + - zinitix,bt532 + - zinitix,bt538 + - zinitix,bt541 + - zinitix,bt548 + - zinitix,bt554 + - zinitix,at100 + + reg: + description: I2C address on the I2C bus + + clock-frequency: + description: I2C client clock frequency, defined for host when using + the device on the I2C bus + minimum: 0 + maximum: 400000 + + interrupts: + description: Interrupt to host + maxItems: 1 + + vcca-supply: + description: Analog power supply regulator on the VCCA pin + + vdd-supply: + description: Digital power supply regulator on the VDD pin. + In older device trees this can be the accidental name for the analog + supply on the VCCA pin, and in that case the deprecated vddo-supply is + used for the digital power supply. + + vddo-supply: + description: Deprecated name for the digital power supply, use vdd-supply + as this reflects the real name of the pin. If this supply is present, + the vdd-supply represents VCCA instead of VDD. Implementers should first + check for this property, and if it is present assume that the vdd-supply + represents the analog supply. + deprecated: true + + reset-gpios: + description: Reset line for the touchscreen, should be tagged + as GPIO_ACTIVE_LOW + + zinitix,mode: + description: Mode of reporting touch points. Some modes may not work + with a particular ts firmware for unknown reasons. Available modes are + 1 and 2. Mode 2 is the default and preferred. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + + linux,keycodes: + description: + This property specifies an array of keycodes assigned to the + touch-keys that can be present in some touchscreen configurations. + If the touch-keys are enabled, controller firmware will assign some + touch sense lines to those keys. + minItems: 1 + maxItems: 8 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + interrupt-parent = <&gpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + vcca-supply = <®_vcca_tsp>; + vdd-supply = <®_vdd_tsp>; + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + zinitix,mode = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml new file mode 100644 index 000000000..b26e6fe17 --- /dev/null +++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/zii,rave-sp-pwrbutton.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zodiac Inflight Innovations RAVE Supervisory Processor Power Button + +maintainers: + - Frank Li <Frank.li@nxp.com> + +description: + RAVE SP input device is a "MFD cell" device corresponding to power + button functionality of RAVE Supervisory Processor. It is expected + that its Device Tree node is specified as a child of the node + corresponding to the parent RAVE SP device (as documented in + Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml) + +properties: + compatible: + const: zii,rave-sp-pwrbutton + +required: + - compatible + +allOf: + - $ref: input.yaml + +unevaluatedProperties: false + +examples: + - | + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + |