Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

9 files changed, 912 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/i3c/adi,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/adi,i3c-master.yaml
new file mode 100644
index 000000000..2498672d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/adi,i3c-master.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/adi,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices I3C Controller
+
+description:
+  FPGA-based I3C controller designed to interface with I3C and I2C peripherals,
+  implementing a subset of the I3C-basic specification. The IP core is tested
+  on arm, microblaze, and arm64 architectures.
+
+  https://analogdevicesinc.github.io/hdl/library/i3c_controller
+
+maintainers:
+  - Jorge Marques <jorge.marques@analog.com>
+
+properties:
+  compatible:
+    const: adi,i3c-master-v1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The AXI interconnect clock, drives the register map.
+      - description:
+          The secondary clock, drives the internal logic asynchronously to the
+          register map. The presence of this entry states that the IP Core was
+          synthesized with a second clock input, and the absence of this entry
+          indicates a topology where a single clock input drives all the
+          internal logic.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: i3c
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: i3c.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i3c@44a00000 {
+        compatible = "adi,i3c-master-v1";
+        reg = <0x44a00000 0x1000>;
+        interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 15>, <&clkc 15>;
+        clock-names = "axi", "i3c";
+        #address-cells = <3>;
+        #size-cells = <0>;
+
+        /* I3C and I2C devices */
+    };
diff --git a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
new file mode 100644
index 000000000..47be5d9a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/aspeed,ast2600-i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 i3c controller
+
+maintainers:
+  - Jeremy Kerr <jk@codeconstruct.com.au>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: aspeed,ast2600-i3c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  sda-pullup-ohms:
+    enum: [545, 750, 2000]
+    default: 2000
+    description: |
+      Value to configure SDA pullup resistor, in Ohms.
+
+  aspeed,global-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to i3c global register syscon node
+          - description: index of this i3c controller in the global register set
+    description: |
+      A (phandle, controller index) reference to the i3c global register set
+      used for this device.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - aspeed,global-regs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i3c@2000 {
+        compatible = "aspeed,ast2600-i3c";
+        reg = <0x2000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        clocks = <&syscon 0>;
+        resets = <&syscon 0>;
+        aspeed,global-regs = <&i3c_global 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i3c1_default>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
new file mode 100644
index 000000000..280f0ada3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/cdns,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence I3C master block
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cdns,i3c-master
+      - items:
+          - enum:
+              - axiado,ax3000-i3c
+              - axiado,ax3005-i3c
+          - const: cdns,i3c-master
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sysclk
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
new file mode 100644
index 000000000..5603f2e78
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -0,0 +1,222 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I3C bus
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  I3C busses can be described with a node for the primary I3C controller device
+  and a set of child nodes for each I2C or I3C slave on the bus. Each of them
+  may, during the life of the bus, request mastership.
+
+properties:
+  $nodename:
+    pattern: "^i3c@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 3
+    description: |
+      Each I2C device connected to the bus should be described in a subnode.
+
+      All I3C devices are supposed to support DAA (Dynamic Address Assignment),
+      and are thus discoverable. So, by default, I3C devices do not have to be
+      described in the device tree. This being said, one might want to attach
+      extra resources to these devices, and those resources may have to be
+      described in the device tree, which in turn means we have to describe
+      I3C devices.
+
+      Other use-cases for describing an I3C device in the device tree are:
+      - When the I3C device has a static I2C address and we want to assign
+        it a specific I3C dynamic address before the DAA takes place (so
+        that other devices on the bus can't take this dynamic address).
+      - When the I3C device requires SETAASA for its discovery and uses a
+        pre-defined static address.
+
+  "#size-cells":
+    const: 0
+
+  i3c-scl-hz:
+    description: |
+      Frequency of the SCL signal used for I3C transfers. When undefined, the
+      default value should be 12.5MHz.
+
+      May not be supported by all controllers.
+
+  i2c-scl-hz:
+    description: |
+      Frequency of the SCL signal used for I2C transfers. When undefined, the
+      default should be to look at LVR (Legacy Virtual Register) values of
+      I2C devices described in the device tree to determine the maximum I2C
+      frequency.
+
+      May not be supported by all controllers.
+
+  mctp-controller:
+    type: boolean
+    description: |
+      Indicates that the system is accessible via this bus as an endpoint for
+      MCTP over I3C transport.
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+    description: |
+      I2C child, should be named: <device-type>@<i2c-address>
+
+      All properties described in dtschema schemas/i2c/i2c-controller.yaml
+      are valid here, except the reg property whose content is changed.
+
+    properties:
+      compatible:
+        description:
+          Compatible of the I2C device.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  I2C address. 10 bit addressing is not supported. Devices with
+                  10-bit address can't be properly passed through DEFSLVS
+                  command.
+                minimum: 0
+                maximum: 0x7f
+              - const: 0
+              - description: |
+                  Shall encode the I3C LVR (Legacy Virtual Register):
+                  See include/dt-bindings/i3c/i3c.h
+                    bit[31:8]: unused/ignored
+                    bit[7:5]: I2C device index. Possible values:
+                      * 0: I2C device has a 50 ns spike filter
+                      * 1: I2C device does not have a 50 ns spike filter but
+                           supports high frequency on SCL
+                      * 2: I2C device does not have a 50 ns spike filter and is
+                           not tolerant to high frequencies
+                      * 3-7: reserved
+                    bit[4]: tell whether the device operates in FM (Fast Mode)
+                            or FM+ mode:
+                      * 0: FM+ mode
+                      * 1: FM mode
+                    bit[3:0]: device type
+                      * 0-15: reserved
+
+    required:
+      - compatible
+      - reg
+
+  "@[0-9a-f]+,[0-9a-f]+$":
+    type: object
+    description: |
+      I3C child, should be named: <device-type>@<static-i2c-address>,<i3c-pid>
+
+    properties:
+      reg:
+        items:
+          - items:
+              - description: |
+                  Encodes the static I2C address. Should be 0 if the device does
+                  not have one (0 is not a valid I2C address).
+                minimum: 0
+                maximum: 0x7f
+              - description: |
+                  First half of the Provisioned ID (following the PID
+                  definition provided by the I3C specification).
+
+                  Contains the manufacturer ID left-shifted by 1.
+              - description: |
+                  Second half of the Provisioned ID (following the PID
+                  definition provided by the I3C specification).
+
+                  Contains the ORing of the part ID left-shifted by 16,
+                  the instance ID left-shifted by 12 and extra information.
+
+      assigned-address:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0x1
+        maximum: 0xff
+        description: |
+          Dynamic address to be assigned to this device. In case static address is
+          present (first cell of the reg property != 0), this address is assigned
+          through SETDASA. If static address is not present, this address is assigned
+          through SETNEWDA after assigning a temporary address via ENTDAA. If
+          SETAASA is used, this property is not used, and the static address itself
+          becomes the dynamic address.
+
+      mipi-i3c-static-method:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0x1
+        maximum: 0x7
+        default: 1
+        description: |
+          Bitmap describing which methods of Dynamic Address Assignment from a
+          static address are supported by this I3C Target. For each defined bit
+          position, a set bit indicates support for that method and a cleared
+          bit indicates lack of support.
+
+            Bit 0: SETDASA CCC (Direct)
+            Bit 1: SETAASA CCC (Broadcast)
+            Bit 2: Other CCC (vendor / standards extension)
+            All other bits are reserved.
+
+          This property follows the MIPI I3C specification. The primary use
+          of this property is to indicate support for SETAASA, i.e Bit 1, but
+          will allow other values mentioned in the specification so that it
+          mirrors the specification. SETDASA will remain as the default method
+          even if this property is not present.
+
+    required:
+      - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/i3c/i3c.h>
+
+    i3c@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        /* I2C device. */
+        eeprom@57 {
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 (I2C_FM | I2C_FILTER)>;
+            pagesize = <0x8>;
+        };
+
+        /* I3C device with a static I2C address and assigned address. */
+        thermal_sensor: sensor@68,39200144004 {
+            reg = <0x68 0x392 0x144004>;
+            assigned-address = <0xa>;
+        };
+
+        /* I3C device with only assigned address. */
+        pressure_sensor: sensor@0,39200124004 {
+            reg = <0x0 0x392 0x124000>;
+            assigned-address = <0xc>;
+        };
+
+        /*
+         * I3C device without a static I2C address but requiring
+         * resources described in the DT.
+         */
+        sensor@0,39200154004 {
+            reg = <0x0 0x392 0x154004>;
+            clocks = <&clock_provider 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
new file mode 100644
index 000000000..d488fb420
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI I3C HCI
+
+maintainers:
+  - Nicolas Pitre <npitre@baylibre.com>
+
+description: |
+  MIPI I3C Host Controller Interface
+
+  The MIPI I3C HCI (Host Controller Interface) specification defines
+  a common software driver interface to support compliant MIPI I3C
+  host controller hardware implementations from multiple vendors.
+
+  The hardware is self-advertising for differences in implementation
+  capabilities, including the spec version it is based on, so there
+  isn't much to describe here (yet).
+
+  For details, please see:
+  https://www.mipi.org/specifications/i3c-hci
+
+properties:
+  compatible:
+    enum:
+      - mipi-i3c-hci
+      - microchip,sama7d65-i3c-hci
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral bus clock
+      - description: System Generic clock
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/i3c/i3c.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,sama7d65-i3c-hci
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c@a0000000 {
+      compatible = "mipi-i3c-hci";
+      reg = <0xa0000000 0x2000>;
+      interrupts = <89>;
+      #address-cells = <3>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml b/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
new file mode 100644
index 000000000..a20d87508
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/renesas,i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas I3C Bus Interface
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+  - Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a08g045-i3c # RZ/G3S
+              - renesas,r9a09g047-i3c # RZ/G3E
+      - items:
+          - enum:
+              - renesas,r9a09g056-i3c # RZ/V2N
+              - renesas,r9a09g057-i3c # RZ/V2H(P)
+          - const: renesas,r9a09g047-i3c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Non-recoverable internal error interrupt
+      - description: Normal transfer error interrupt
+      - description: Normal transfer abort interrupt
+      - description: Normal response status buffer full interrupt
+      - description: Normal command buffer empty interrupt
+      - description: Normal IBI status buffer full interrupt
+      - description: Normal Rx data buffer full interrupt
+      - description: Normal Tx data buffer empty interrupt
+      - description: Normal receive status buffer full interrupt
+      - description: START condition detection interrupt
+      - description: STOP condition detection interrupt
+      - description: Transmit end interrupt
+      - description: NACK detection interrupt
+      - description: Arbitration lost interrupt
+      - description: Timeout detection interrupt
+      - description: Wake-up condition detection interrupt
+      - description: HDR Exit Pattern detection interrupt
+    minItems: 16
+
+  interrupt-names:
+    items:
+      - const: ierr
+      - const: terr
+      - const: abort
+      - const: resp
+      - const: cmd
+      - const: ibi
+      - const: rx
+      - const: tx
+      - const: rcv
+      - const: st
+      - const: sp
+      - const: tend
+      - const: nack
+      - const: al
+      - const: tmo
+      - const: wu
+      - const: exit
+    minItems: 16
+
+  clocks:
+    items:
+      - description: APB bus clock
+      - description: transfer clock
+      - description: SFRs clock
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: tclk
+      - const: pclkrw
+    minItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Reset signal
+      - description: APB interface reset signal/SCAN reset signal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: tresetn
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clock-names
+  - clocks
+  - power-domains
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: i3c.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a08g045-i3c
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+        interrupts:
+          minItems: 17
+        interrupt-names:
+          minItems: 17
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g047-i3c
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+        interrupts:
+          maxItems: 16
+        interrupt-names:
+          maxItems: 16
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a08g045-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i3c@1005b000 {
+        compatible = "renesas,r9a08g045-i3c";
+        reg = <0x1005b000 0x1000>;
+        clocks = <&cpg CPG_MOD R9A08G045_I3C_PCLK>,
+                 <&cpg CPG_MOD R9A08G045_I3C_TCLK>;
+        clock-names = "pclk", "tclk";
+        interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ierr", "terr", "abort", "resp",
+                          "cmd", "ibi", "rx", "tx", "rcv",
+                          "st", "sp", "tend", "nack",
+                          "al", "tmo", "wu", "exit";
+        resets = <&cpg R9A08G045_I3C_PRESETN>,
+                 <&cpg R9A08G045_I3C_TRESETN>;
+        reset-names = "presetn", "tresetn";
+        power-domains = <&cpg>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
new file mode 100644
index 000000000..853092f75
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/silvaco,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silvaco I3C master
+
+maintainers:
+  - Conor Culhane <conor.culhane@silvaco.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nuvoton,npcm845-i3c
+          - silvaco,i3c-master-v1
+      - items:
+          - enum:
+              - nxp,imx94-i3c
+              - nxp,imx95-i3c
+          - const: silvaco,i3c-master-v1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: system clock
+      - description: bus clock
+      - description: other (slower) events clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pclk
+      - const: fast_clk
+      - const: slow_clk
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+allOf:
+  - $ref: i3c.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nuvoton,npcm845-i3c
+            - silvaco,i3c-master-v1
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,imx94-i3c
+              - nxp,imx95-i3c
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c@a0000000 {
+        compatible = "silvaco,i3c-master-v1";
+        clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
+        clock-names = "pclk", "fast_clk", "slow_clk";
+        interrupt-parent = <&gic>;
+        interrupts = <0 89 4>;
+        reg = <0xa0000000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
new file mode 100644
index 000000000..dc7ee3800
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare I3C master block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dw-i3c-master-1.00a
+      - items:
+          - const: altr,agilex5-dw-i3c-master
+          - const: snps,dw-i3c-master-1.00a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Core clock
+      - description: APB clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: apb
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c@2000 {
+        compatible = "snps,dw-i3c-master-1.00a";
+        #address-cells = <3>;
+        #size-cells = <0>;
+        reg = <0x02000 0x1000>;
+        interrupts = <0>;
+        clocks = <&i3cclk>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c-1.0.yaml b/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c-1.0.yaml
new file mode 100644
index 000000000..2caa245a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c-1.0.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/xlnx,axi-i3c-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD I3C master
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Shubham Patil <shubhamsanjay.patil@amd.com>
+
+description:
+  The AXI-I3C IP is an I3C Controller with an AXI4-Lite interface, compatible
+  with the MIPI I3C Specification v1.1.1. The design includes bidirectional I/O
+  buffers that implement open collector drivers for the SDA and SCL signals.
+  External pull-up resistors are required to properly hold the bus at a Logic-1
+  level when the drivers are released.
+
+  For more details, please see https://docs.amd.com/r/en-US/pg439-axi-i3c
+
+properties:
+  compatible:
+    const: xlnx,axi-i3c-1.0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: i3c.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i3c@80000000 {
+        compatible = "xlnx,axi-i3c-1.0";
+        reg = <0x80000000 0x10000>;
+        clocks = <&zynqmp_clk 71>;
+        interrupt-parent = <&imux>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+    };
+...