staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 272 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
new file mode 100644
index 000000000..fb8d7a9a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Phase-Locked Loop (DPLL) Device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Digital Phase-Locked Loop (DPLL) device is used for precise clock
+  synchronization in networking and telecom hardware. The device can
+  have one or more channels (DPLLs) and one or more physical input and
+  output pins. Each DPLL channel can either produce pulse-per-clock signal
+  or drive ethernet equipment clock. The type of each channel can be
+  indicated by dpll-types property.
+
+properties:
+  $nodename:
+    pattern: "^dpll(@.*)?$"
+
+  "#address-cells":
+    const: 0
+
+  "#size-cells":
+    const: 0
+
+  dpll-types:
+    description: List of DPLL channel types, one per DPLL instance.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum: [pps, eec]
+
+  input-pins:
+    type: object
+    description: DPLL input pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9a-f]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  output-pins:
+    type: object
+    description: DPLL output pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/dpll/dpll-pin.yaml b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
new file mode 100644
index 000000000..1287a472f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPLL Pin
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description: |
+  The DPLL pin is either a physical input or output pin that is provided
+  by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by
+  its physical order number that is stored in reg property and can have
+  an additional set of properties like supported (allowed) frequencies,
+  label, type and may support embedded sync.
+
+  Note that the pin in this context has nothing to do with pinctrl.
+
+properties:
+  reg:
+    description: Hardware index of the DPLL pin.
+    maxItems: 1
+
+  connection-type:
+    description: Connection type of the pin
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ext, gnss, int, mux, synce]
+
+  esync-control:
+    description: Indicates whether the pin supports embedded sync functionality.
+    type: boolean
+
+  label:
+    description: String exposed as the pin board label
+    $ref: /schemas/types.yaml#/definitions/string
+
+  ref-sync-sources:
+    description: |
+      List of phandles to input pins that can serve as the sync source
+      in a Reference-Sync pair with this pin acting as the clock source.
+      A Ref-Sync pair consists of a clock reference and a low-frequency
+      sync signal.  The DPLL locks to the clock reference but
+      phase-aligns to the sync reference.
+      Only valid for input pins.  Each referenced pin must be a
+      different input pin on the same device.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+
+  supported-frequencies-hz:
+    description: List of supported frequencies for this pin, expressed in Hz.
+
+required:
+  - reg
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
new file mode 100644
index 000000000..17983e6c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Azurite DPLL device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that
+  provides up to 5 independent DPLL channels, up to 10 differential or
+  single-ended inputs and 10 differential or 20 single-ended outputs.
+  These devices support both I2C and SPI interfaces.
+  The ZL3064x line card timing ICs  share the ZL3073x register map
+  and are described with a fallback to the register equivalent ZL3073x
+  part.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - microchip,zl30731
+          - microchip,zl30732
+          - microchip,zl30733
+          - microchip,zl30734
+          - microchip,zl30735
+      - items:
+          - const: microchip,zl30643
+          - const: microchip,zl30733
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/dpll/dpll-device.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30732";
+        reg = <0x70>;
+        dpll-types = "pps", "eec";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          sync0: pin@0 { /* REF0P - 1 PPS sync source */
+            reg = <0>;
+            connection-type = "ext";
+            label = "SMA1";
+            supported-frequencies-hz = /bits/ 64 <1>;
+          };
+
+          pin@1 { /* REF0N - clock source, can pair with sync0 */
+            reg = <1>;
+            connection-type = "ext";
+            label = "SMA2";
+            supported-frequencies-hz = /bits/ 64 <10000 10000000>;
+            ref-sync-sources = <&sync0>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30731";
+        reg = <0x70>;
+        spi-max-frequency = <12500000>;
+
+        dpll-types = "pps";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          sync1: pin@0 { /* REF0P - 1 PPS sync source */
+            reg = <0>;
+            connection-type = "gnss";
+            label = "GNSS_1PPS_IN";
+            supported-frequencies-hz = /bits/ 64 <1>;
+          };
+
+          pin@1 { /* REF0N - clock source */
+            reg = <1>;
+            connection-type = "gnss";
+            label = "GNSS_10M_IN";
+            supported-frequencies-hz = /bits/ 64 <10000000>;
+            ref-sync-sources = <&sync1>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+...