Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

4 files changed, 420 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml b/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml
new file mode 100644
index 000000000..50d3fabe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/rockchip,dfi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DFI
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dfi
+      - rockchip,rk3568-dfi
+      - rockchip,rk3588-dfi
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk_ddr_mon
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  reg:
+    maxItems: 1
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3399-dfi
+
+then:
+  required:
+    - clocks
+    - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3308-cru.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dfi: dfi@ff630000 {
+        compatible = "rockchip,rk3399-dfi";
+        reg = <0x00 0xff630000 0x00 0x4000>;
+        interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+        rockchip,pmu = <&pmugrf>;
+        clocks = <&cru PCLK_DDR_MON>;
+        clock-names = "pclk_ddr_mon";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
new file mode 100644
index 000000000..2bdd05af6
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-nocp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos NoC (Network on Chip) Probe
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus.
+  NoC provides the primitive values to get the performance data. The packets
+  that the Network on Chip (NoC) probes detects are transported over the
+  network infrastructure to observer units. You can configure probes to capture
+  packets with header or data on the data request response network, or as
+  traffic debug or statistic collectors. Exynos542x bus has multiple NoC probes
+  to provide bandwidth information about behavior of the SoC that you can use
+  while analyzing system performance.
+
+properties:
+  compatible:
+    const: samsung,exynos5420-nocp
+
+  clock-names:
+    items:
+      - const: nocp
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nocp_mem0_0: nocp@10ca1000 {
+        compatible = "samsung,exynos5420-nocp";
+        reg = <0x10ca1000 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
new file mode 100644
index 000000000..a3f0cd508
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-ppmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit)
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
+  each IP. PPMU provides the primitive values to get performance data. These
+  PPMU events provide information of the SoC's behaviors so that you may use to
+  analyze system performance, to make behaviors visible and to count usages of
+  each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).  The
+  Exynos PPMU driver uses the devfreq-event class to provide event data to
+  various devfreq devices. The devfreq devices would use the event data when
+  determining the current state of each IP.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-ppmu
+      - samsung,exynos-ppmu-v2
+
+  clock-names:
+    items:
+      - const: ppmu
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  events:
+    type: object
+
+    patternProperties:
+      '^ppmu-event[0-9]+(-[a-z0-9]+){0,2}$':
+        type: object
+        properties:
+          event-name:
+            description: |
+              The unique event name among PPMU device
+            $ref: /schemas/types.yaml#/definitions/string
+
+          event-data-type:
+            description: |
+              Define the type of data which shell be counted by the counter.
+              You can check include/dt-bindings/pmu/exynos_ppmu.h for all
+              possible type, i.e. count read requests, count write data in
+              bytes, etc.  This field is optional and when it is missing, the
+              driver code will use default data type.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - event-name
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    // PPMUv1 nodes for Exynos3250 (although the board DTS defines events)
+    #include <dt-bindings/clock/exynos3250.h>
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+
+            ppmu_dmc0_2: ppmu-event2-dmc0 {
+                event-name = "ppmu-event2-dmc0";
+            };
+
+            ppmu_dmc0_1: ppmu-event1-dmc0 {
+                event-name = "ppmu-event1-dmc0";
+            };
+
+            ppmu_dmc0_0: ppmu-event0-dmc0 {
+                event-name = "ppmu-event0-dmc0";
+            };
+        };
+    };
+
+    ppmu_rightbus: ppmu@112a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x112a0000 0x2000>;
+        clocks = <&cmu CLK_PPMURIGHT>;
+        clock-names = "ppmu";
+
+        events {
+            ppmu_rightbus_3: ppmu-event3-rightbus {
+                event-name = "ppmu-event3-rightbus";
+            };
+        };
+    };
+
+  - |
+    // PPMUv2 nodes in Exynos5433
+    ppmu_d0_cpu: ppmu@10480000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x10480000 0x2000>;
+    };
+
+    ppmu_d0_general: ppmu@10490000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x10490000 0x2000>;
+
+        events {
+            ppmu_event0_d0_general: ppmu-event0-d0-general {
+                event-name = "ppmu-event0-d0-general";
+            };
+        };
+    };
+
+    ppmu_d0_rt: ppmu@104a0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104a0000 0x2000>;
+    };
+
+    ppmu_d1_cpu: ppmu@104b0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104b0000 0x2000>;
+    };
+
+    ppmu_d1_general: ppmu@104c0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104c0000 0x2000>;
+    };
+
+    ppmu_d1_rt: ppmu@104d0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104d0000 0x2000>;
+    };
+
+  - |
+    // PPMUv1 nodes with event-data-type for Exynos4412
+    #include <dt-bindings/pmu/exynos_ppmu.h>
+
+    ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        clocks = <&clock 400>;
+        clock-names = "ppmu";
+
+        events {
+            ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+                event-data-type = <(PPMU_RO_DATA_CNT |
+                                    PPMU_WO_DATA_CNT)>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
new file mode 100644
index 000000000..ea1dc86bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Activity Monitor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The activity monitor block collects statistics about the behaviour of other
+  components in the system. This information can be used to derive the rate at
+  which the external memory needs to be clocked in order to serve all requests
+  from the monitored clients.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra30-actmon
+          - nvidia,tegra114-actmon
+          - nvidia,tegra124-actmon
+      - items:
+          - const: nvidia,tegra210-actmon
+          - const: nvidia,tegra124-actmon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: actmon
+      - const: emc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: actmon
+
+  interrupts:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 12
+
+  interconnect-names:
+    minItems: 1
+    maxItems: 12
+    description:
+      Should include name of the interconnect path for each interconnect
+      entry. Consult TRM documentation for information about available
+      memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
+  "#cooling-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - interrupts
+  - interconnects
+  - interconnect-names
+  - operating-points-v2
+  - "#cooling-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra30-mc.h>
+
+    mc: memory-controller@7000f000 {
+        compatible = "nvidia,tegra30-mc";
+        reg = <0x7000f000 0x400>;
+        clocks = <&clk 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
+
+    emc: external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra30-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+    };
+
+    actmon@6000c800 {
+        compatible = "nvidia,tegra30-actmon";
+        reg = <0x6000c800 0x400>;
+        interrupts = <0 45 4>;
+        clocks = <&clk 119>, <&clk 57>;
+        clock-names = "actmon", "emc";
+        resets = <&rst 119>;
+        reset-names = "actmon";
+        operating-points-v2 = <&dvfs_opp_table>;
+        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
+        interconnect-names = "cpu-read";
+        #cooling-cells = <2>;
+    };