KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

2 files changed, 111 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/csky/cpus.txt b/Documentation/devicetree/bindings/csky/cpus.txt
new file mode 100644
index 000000000..ae79412f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/csky/cpus.txt
@@ -0,0 +1,73 @@
+==================
+C-SKY CPU Bindings
+==================
+
+The device tree allows to describe the layout of CPUs in a system through
+the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+defining properties for every cpu.
+
+Only SMP system need to care about the cpus node and single processor
+needn't define cpus node at all.
+
+=====================================
+cpus and cpu node bindings definition
+=====================================
+
+- cpus node
+
+	Description: Container of cpu nodes
+
+	The node name must be "cpus".
+
+	A cpus node must define the following properties:
+
+	- #address-cells
+		Usage: required
+		Value type: <u32>
+		Definition: must be set to 1
+	- #size-cells
+		Usage: required
+		Value type: <u32>
+		Definition: must be set to 0
+
+- cpu node
+
+	Description: Describes one of SMP cores
+
+	PROPERTIES
+
+	- device_type
+		Usage: required
+		Value type: <string>
+		Definition: must be "cpu"
+	- reg
+		Usage: required
+		Value type: <u32>
+		Definition: CPU index
+	- compatible:
+		Usage: required
+		Value type: <string>
+		Definition: must contain "csky", eg:
+			"csky,610"
+			"csky,807"
+			"csky,810"
+			"csky,860"
+
+Example:
+--------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			status = "ok";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			status = "ok";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/csky/pmu.txt b/Documentation/devicetree/bindings/csky/pmu.txt
new file mode 100644
index 000000000..728d05ca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/csky/pmu.txt
@@ -0,0 +1,38 @@
+===============================
+C-SKY Performance Monitor Units
+===============================
+
+C-SKY Performance Monitor is designed for ck807/ck810/ck860 SMP soc and
+it could count cpu's events for helping analysis performance issues.
+
+============================
+PMU node bindings definition
+============================
+
+	Description: Describes PMU
+
+	PROPERTIES
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be "csky,csky-pmu"
+	- interrupts
+		Usage: required
+		Value type: <u32 IRQ_TYPE_XXX>
+		Definition: must be pmu irq num defined by soc
+	- count-width
+		Usage: optional
+		Value type: <u32>
+		Definition: the width of pmu counter
+
+Examples:
+---------
+#include <dt-bindings/interrupt-controller/irq.h>
+
+	pmu: performace-monitor {
+		compatible = "csky,csky-pmu";
+		interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&intc>;
+		count-width = <48>;
+        };