diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-30 09:22:00 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-30 09:22:00 -0700 |
| commit | 034dd340b08be1f2f0477ad16131d609f9dbd53c (patch) | |
| tree | 2536f4b2d7893ccd916b5abdf3c454ad6edc03c2 /Documentation/devicetree/bindings/bus | |
| download | linux-stable-034dd340b08be1f2f0477ad16131d609f9dbd53c.tar.gz linux-stable-034dd340b08be1f2f0477ad16131d609f9dbd53c.zip | |
Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted
Pull tracing fixes from Steven Rostedt:
- Fix error output of boot instance creation failure
Currently if a boot instance creation fails, instead of printing out
the name of the instance that failed, it prints "(null)". That is
because it prints "cur_str" that had already been processed by
strsep(). Print the saved name instead.
While at it, print the error code of the failure.
- Fix use-after-free for same named historgrams
Histograms can be named so that they can be used in multiple events.
But if the named histogram has a variable attached, the second event
that uses the named histogram which duplicates it and needs to free
the original after duplication leaves the old variable in place and
still visible. If another histogram uses than variable, it will use
the stale one which will try to reference the freed duplicate
histogram and crash the kernel.
Free the duplicate variables along with the duplicated histogram
data.
- Check return value of kthread_run() in event self test
The events self tests uses a kthread for testing but does not check
if it succeeded in creating a kthread. If the kthread creation were
to fail, the code will still try to call kthread_stop() on the error
returned.
- Fix race between reading trace_pipe and updating subbuffer size
If a user is reading the trace_pipe file at the same time they update
the ring buffer sub-buffer size, can cause the trace_pipe read to
read stale data. Add trace_access_lock() around updating the ring
buffer sub-buffer size.
- Fix eventfs_inode on failure path in creation of the events directory
In the creation of the "events" directory, if after allocating the
eventfs_inode a failure is detected, it calls cleanup_ei() which
calls free_ei(). The free_ei() will test if eventfs_inode being freed
has no children. It is a bug if it does. But on the failure case of
the creation of the "events" directory, the children lists have not
yet been initialized and the free will trigger a warning because
list_empty() on an uninitialized list returns false.
Move the initialization into init_ei() where it makes more sense and
makes sure that a created eventfs_inode has its lists initialized
upon creation.
- Check return value of kthread_run() in ftrace direct sample code
The sample code that shows how to use the ftrace direct calls does
not test the return of kthread_run() to see if it succeeds. Return a
failure if the kthread_run() doesn't succeed.
- Clear user events state on fork in case of alloc failure
On fork, the child gets a pointer to the parent's user events state.
It makes a copy of it then updates the child's pointer to it. But if
the allocation fails, the duplication function leaves the child with
a pointer to its parent's descriptor. When the child cleans up its
data, it will free the parent's descriptor while the parent is still
using it.
In the duplication function, set the child's user_event_mm to NULL
before testing if the allocation succeeded, and when it exits it will
not free the parent's descriptor.
- Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a
failed replacement leaves it at -1.
But the check for success expects the retry value to be non-zero and
exits with an error on zero. This is the opposite result. Fix it.
- Fail nicely when the remote swap_reader_page() returns an error
Currently, if the swap_reader_page() of a remote buffer fails, it
triggers a WARN_ON_ONCE() and continues normally. Instead, have it
exit with an error and a pr_warn() print instead of a full WARNING.
* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Stop remote reader update when page swap fails
tracing: Fix retry exhaustion in simple ring buffer reader swap
tracing/user_events: Clear copied tracing state before fork duplication
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
eventfs: Initialize ei->children and ei->list in init_ei()
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
tracing: Fix crash passing ERR_PTR to kthread_stop()
tracing: Fix use-after-free with same-name named triggers
tracing: Fix logged instance name on creation failure
Diffstat (limited to 'Documentation/devicetree/bindings/bus')
30 files changed, 2890 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml new file mode 100644 index 000000000..232252e88 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A64 Display Engine Bus + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + $nodename: + pattern: "^bus(@[0-9a-f]+)?$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + compatible: + oneOf: + - const: allwinner,sun50i-a64-de2 + - items: + - const: allwinner,sun50i-h6-de3 + - const: allwinner,sun50i-a64-de2 + + reg: + maxItems: 1 + + allwinner,sram: + description: + The SRAM that needs to be claimed to access the display engine + bus. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device + + ranges: true + +patternProperties: + # All other properties should be child nodes with unit-address and 'reg' + "@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - allwinner,sram + +additionalProperties: false + +examples: + - | + bus@1000000 { + compatible = "allwinner,sun50i-a64-de2"; + reg = <0x1000000 0x400000>; + allwinner,sram = <&de2_sram 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000000 0x400000>; + + display_clocks: clock@0 { + compatible = "allwinner,sun50i-a64-de2-clk"; + reg = <0x0 0x100000>; + clocks = <&ccu 52>, <&ccu 99>; + clock-names = "bus", "mod"; + resets = <&ccu 30>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml new file mode 100644 index 000000000..cd5c2a532 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 RSB + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun8i-a23-rsb + - items: + - enum: + - allwinner,sun8i-a83t-rsb + - allwinner,sun50i-h616-rsb + - const: allwinner,sun8i-a23-rsb + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 20000000 + +patternProperties: + "@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +examples: + - | + rsb@1f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <3000000>; + resets = <&apb0_rst 3>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@3e3 { + reg = <0x3e3>; + + /* ... */ + }; + }; + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml new file mode 100644 index 000000000..47227427c --- /dev/null +++ b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Integrator/AP Logic Module extension bus + +maintainers: + - Linus Walleij <linusw@kernel.org> + +description: The Integrator/AP is a prototyping platform and as such has a + site for stacking up to four logic modules (LM) designed specifically for + use with this platform. A special system controller register can be read to + determine if a logic module is connected at index 0, 1, 2 or 3. The logic + module connector is described in this binding. The logic modules per se + then have their own specific per-module bindings and they will be described + as subnodes under this logic module extension bus. + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + compatible: + items: + - const: arm,integrator-ap-lm + + ranges: true + dma-ranges: true + +patternProperties: + "^bus(@[0-9a-f]*)?$": + description: Nodes on the Logic Module bus represent logic modules + and are named with bus. The first module is at 0xc0000000, the second + at 0xd0000000 and so on until the top of the memory of the system at + 0xffffffff. All information about the memory used by the module is + in ranges and dma-ranges. + type: object + + required: + - compatible + +required: + - compatible + +examples: + - | + bus@c0000000 { + compatible = "arm,integrator-ap-lm"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc0000000 0xc0000000 0x40000000>; + dma-ranges; + + bus@c0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xc0000000 0x10000000>; + /* The Logic Modules sees the Core Module 0 RAM @80000000 */ + dma-ranges = <0x00000000 0x80000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + + serial@100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00100000 0x1000>; + interrupts-extended = <&impd1_vic 1>; + }; + + impd1_vic: interrupt-controller@3000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x03000000 0x1000>; + valid-mask = <0x00000bff>; + interrupts-extended = <&pic 9>; + }; + }; + }; + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml new file mode 100644 index 000000000..77e60b32d --- /dev/null +++ b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED Advanced High-Performance Bus Controller (AHBC) + +maintainers: + - Neal Liu <neal_liu@aspeedtech.com> + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> + +description: | + Advanced High-performance Bus Controller (AHBC) supports plenty of mechanisms + including a priority arbiter, an address decoder and a data multiplexer + to control the overall operations of Advanced High-performance Bus (AHB). + +properties: + compatible: + items: + - enum: + - aspeed,ast2600-ahbc + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + ahbc@1e600000 { + compatible = "aspeed,ast2600-ahbc", "syscon"; + reg = <0x1e600000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt b/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt new file mode 100644 index 000000000..edd44d802 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt @@ -0,0 +1,53 @@ +Driver for ARM AXI Bus with Broadcom Plugins (bcma) + +Required properties: + +- compatible : brcm,bus-axi + +- reg : iomem address range of chipcommon core + +The cores on the AXI bus are automatically detected by bcma with the +memory ranges they are using and they get registered afterwards. +Automatic detection of the IRQ number is not working on +BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide +them manually through device tree. Use an interrupt-map to specify the +IRQ used by the devices on the bus. The first address is just an index, +because we do not have any special register. + +The top-level axi bus may contain children representing attached cores +(devices). This is needed since some hardware details can't be auto +detected (e.g. IRQ numbers). Also some of the cores may be responsible +for extra things, e.g. ChipCommon providing access to the GPIO chip. + +Example: + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* Ethernet Controller 0 */ + <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + + chipcommon { + reg = <0x00000000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml new file mode 100644 index 000000000..9017c5a3f --- /dev/null +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom GISB bus Arbiter controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm7445-gisb-arb # for other 28nm chips + - const: brcm,gisb-arb + - items: + - enum: + - brcm,bcm74165-gisb-arb # for V7 new style 16nm chips + - brcm,bcm7278-gisb-arb # for V7 28nm chips + - brcm,bcm7435-gisb-arb # for newer 40nm chips + - brcm,bcm7400-gisb-arb # for older 40nm chips and all 65nm chips + - brcm,bcm7038-gisb-arb # for 130nm chips + - brcm,gisb-arb # fallback compatible + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: timeout interrupt line + - description: target abort interrupt line + - description: breakpoint interrupt line + + brcm,gisb-arb-master-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + 32-bits wide bitmask used to specify which GISB masters are valid at the + system level + + brcm,gisb-arb-master-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: > + String list of the literal name of the GISB masters. Should match the + number of bits set in brcm,gisb-master-mask and the order in which they + appear from MSB to LSB. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + gisb-arb@f0400000 { + compatible = "brcm,gisb-arb"; + reg = <0xf0400000 0x800>; + interrupts = <0>, <2>; + interrupt-parent = <&sun_l2_intc>; + brcm,gisb-arb-master-mask = <0x7>; + brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0"; + }; diff --git a/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml new file mode 100644 index 000000000..d340899ca --- /dev/null +++ b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/cznic,moxtet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Turris Moxtet SPI bus + +maintainers: + - Marek Behún <kabel@kernel.org> + +description: > + Turris Mox module status and configuration bus (over SPI) + + The driver finds the devices connected to the bus by itself, but it may be + needed to reference some of them from other parts of the device tree. In that + case the devices can be defined as subnodes of the moxtet node. + +properties: + compatible: + const: cznic,moxtet + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + spi-cpol: true + + spi-cpha: true + + spi-max-frequency: true + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - spi-cpol + - spi-cpha + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + + required: + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + moxtet@1 { + compatible = "cznic,moxtet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml new file mode 100644 index 000000000..993293ebc --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/fsl,imx8mp-aipstz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Secure AHB to IP Slave bus (AIPSTZ) bridge + +description: + The secure AIPS bridge (AIPSTZ) acts as a bridge for AHB masters issuing + transactions to IP Slave peripherals. Additionally, this module offers access + control configurations meant to restrict which peripherals a master can + access. + +maintainers: + - Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> + +properties: + compatible: + const: fsl,imx8mp-aipstz + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#access-controller-cells": + const: 3 + description: + First cell - consumer ID + Second cell - consumer type (master or peripheral) + Third cell - configuration value + + ranges: true + +# borrowed from simple-bus.yaml, no additional requirements for children +patternProperties: + "@(0|[1-9a-f][0-9a-f]*)$": + type: object + additionalProperties: true + properties: + reg: + items: + minItems: 2 + maxItems: 4 + minItems: 1 + maxItems: 1024 + ranges: + oneOf: + - items: + minItems: 3 + maxItems: 7 + minItems: 1 + maxItems: 1024 + - $ref: /schemas/types.yaml#/definitions/flag + anyOf: + - required: + - reg + - required: + - ranges + +required: + - compatible + - reg + - power-domains + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus@30df0000 { + compatible = "fsl,imx8mp-aipstz"; + reg = <0x30df0000 0x10000>; + ranges = <0x30c00000 0x30c00000 0x400000>; + power-domains = <&pgc_audio>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <3>; + + dma-controller@30e00000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e00000 0x10000>; + #dma-cells = <3>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml new file mode 100644 index 000000000..6645352c7 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os + sitting together with the PHYs. It is not the same as the MSI bus coming + from i.MX8 System Controller Unit (SCU) which is used to control power, + clock and reset through the i.MX8 Distributed Slave System Controller (DSC). + + i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks, + that is, MSI clock and AHB clock, need to be enabled so that peripherals + connected to the bus can be accessed. Also, the bus is part of a power + domain. The power domain needs to be enabled before the peripherals can + be accessed. + + Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems, + like I2C controller, PWM controller, MIPI DSI controller and Control and + Status Registers (CSR) module, are accessed through the bus. + + The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp + pixel link MSI bus controller and does not allow SCFW user to control it. + So, the controller's registers cannot be accessed by SCFW user. Hence, + the interrupts generated by the controller don't make any sense from SCFW + user's point of view. + +allOf: + - $ref: simple-pm-bus.yaml# + +# We need a select here so we don't match all nodes with 'simple-pm-bus'. +select: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-display-pixel-link-msi-bus + - fsl,imx8qm-display-pixel-link-msi-bus + required: + - compatible + +properties: + compatible: + items: + - enum: + - fsl,imx8qxp-display-pixel-link-msi-bus + - fsl,imx8qm-display-pixel-link-msi-bus + - const: simple-pm-bus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: master gated clock from system + - description: AHB clock + + clock-names: + items: + - const: msi + - const: ahb + +patternProperties: + "@[0-9a-f]+$": + description: Devices attached to the bus + type: object + + required: + - reg + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + bus@56200000 { + compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus"; + reg = <0x56200000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&dc0_irqsteer>; + interrupts = <320>; + ranges; + clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>, + <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>; + clock-names = "msi", "ahb"; + power-domains = <&pd IMX_SC_R_DC_0>; + + bus@56221000 { + compatible = "simple-pm-bus", "syscon"; + reg = <0x56221000 0x1000>; + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>; + clock-names = "ipg"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = <IMX_SC_R_MIPI_0>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; + + ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + }; + }; + + clock-controller@56223004 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56223004 0x4>; + #clock-cells = <1>; + clocks = <&mipi_lvds_0_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_0>; + }; + + phy@56228300 { + compatible = "fsl,imx8qxp-mipi-dphy"; + reg = <0x56228300 0x100>; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; + clock-names = "phy_ref"; + #phy-cells = <0>; + fsl,syscon = <&mipi_lvds_0_csr>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml new file mode 100644 index 000000000..5e872ddac --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Shared Peripherals Bus Interface + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +description: | + A simple bus enabling access to shared peripherals. + + The "spba-bus" follows the "simple-bus" set of properties, as + specified in the Devicetree Specification. It is an extension of + "simple-bus" because the SDMA controller uses this compatible flag to + determine which peripherals are available to it and the range over which + the SDMA can access. There are no special clocks for the bus, because + the SDMA controller itself has its interrupt and clock assignments. + + EMI (External Memory Interface) for legacy i.MX35. + +select: + properties: + compatible: + contains: + enum: + - fsl,aipi-bus + - fsl,aips + - fsl,eim-bus + - fsl,emi + - fsl,emi-bus + - fsl,spba-bus + required: + - compatible + +properties: + $nodename: + pattern: "^((spba|emi|eim)-bus|bus)(@[0-9a-f]+)?$" + + compatible: + items: + - enum: + - fsl,aipi-bus + - fsl,aips + - fsl,eim-bus + - fsl,emi + - fsl,emi-bus + - fsl,spba-bus + - const: simple-bus + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + reg: + maxItems: 1 + + ranges: true + +required: + - compatible + - '#address-cells' + - '#size-cells' + - reg + - ranges + +additionalProperties: + type: object + +examples: + - | + spba-bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + }; diff --git a/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml new file mode 100644 index 000000000..0bea4f528 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/microsoft,vmbus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsoft Hyper-V VMBus + +maintainers: + - Saurabh Sengar <ssengar@linux.microsoft.com> + +description: + VMBus is a software bus that implements the protocols for communication + between the root or host OS and guest OS'es (virtual machines). + +properties: + compatible: + const: microsoft,vmbus + + ranges: true + + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + + dma-coherent: true + + interrupts: + maxItems: 1 + description: Interrupt is used to report a message from the host. + +required: + - compatible + - ranges + - interrupts + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <2>; + #size-cells = <1>; + bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + vmbus@ff0000000 { + compatible = "microsoft,vmbus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0f 0xf0000000 0x0f 0xf0000000 0x10000000>; + dma-coherent; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 2 IRQ_TYPE_EDGE_RISING>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml new file mode 100644 index 000000000..6a7b26b04 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/mti,mips-cdmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPS Common Device Memory Map + +description: | + Defines a location of the MIPS Common Device Memory Map registers. + +maintainers: + - James Hogan <jhogan@kernel.org> + +properties: + compatible: + const: mti,mips-cdmm + + reg: + description: | + Base address and size of an unoccupied memory region, which will be + used to map the MIPS CDMM registers block. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cdmm@1bde8000 { + compatible = "mti,mips-cdmm"; + reg = <0x1bde8000 0x8000>; + }; +... diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt new file mode 100644 index 000000000..f2ab7fd01 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -0,0 +1,276 @@ + +* Marvell MBus + +Required properties: + +- compatible: Should be set to one of the following: + marvell,armada370-mbus + marvell,armadaxp-mbus + marvell,armada375-mbus + marvell,armada380-mbus + marvell,kirkwood-mbus + marvell,dove-mbus + marvell,orion5x-88f5281-mbus + marvell,orion5x-88f5182-mbus + marvell,orion5x-88f5181-mbus + marvell,orion5x-88f6183-mbus + marvell,mv78xx0-mbus + +- address-cells: Must be '2'. The first cell for the MBus ID encoding, + the second cell for the address offset within the window. + +- size-cells: Must be '1'. + +- ranges: Must be set up to provide a proper translation for each child. + See the examples below. + +- controller: Contains a single phandle referring to the MBus controller + node. This allows to specify the node that contains the + registers that control the MBus, which is typically contained + within the internal register window (see below). + +Optional properties: + +- pcie-mem-aperture: This optional property contains the aperture for + the memory region of the PCIe driver. + If it's defined, it must encode the base address and + size for the address decoding windows allocated for + the PCIe memory region. + +- pcie-io-aperture: Just as explained for the above property, this + optional property contains the aperture for the + I/O region of the PCIe driver. + +* Marvell MBus controller + +Required properties: + +- compatible: Should be set to "marvell,mbus-controller". + +- reg: Device's register space. + Two or three entries are expected (see the examples below): + the first one controls the devices decoding window, + the second one controls the SDRAM decoding window and + the third controls the MBus bridge (only with the + marvell,armada370-mbus and marvell,armadaxp-mbus + compatible strings) + +Example: + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + internal-regs { + compatible = "simple-bus"; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; + }; + + /* more children ...*/ + }; + }; + +** MBus address decoding window specification + +The MBus children address space is comprised of two cells: the first one for +the window ID and the second one for the offset within the window. +In order to allow to describe valid and non-valid window entries, the +following encoding is used: + + 0xSIAA0000 0x00oooooo + +Where: + + S = 0x0 for a MBus valid window + S = 0xf for a non-valid window (see below) + +If S = 0x0, then: + + I = 4-bit window target ID + AA = windpw attribute + +If S = 0xf, then: + + I = don't care + AA = 1 for internal register + +Following the above encoding, for each ranges entry for a MBus valid window +(S = 0x0), an address decoding window is allocated. On the other side, +entries for translation that do not correspond to valid windows (S = 0xf) +are skipped. + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + + ranges = <0xf0010000 0 0 0xd0000000 0x100000 + 0x01e00000 0 0 0xfff00000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <0x01e00000 0 0x100000>; + }; + + /* other children */ + ... + + internal-regs { + compatible = "simple-bus"; + ranges = <0 0xf0010000 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; + }; + + /* more children ...*/ + }; + }; + +In the shown example, the translation entry in the 'ranges' property is what +makes the MBus driver create a static decoding window for the corresponding +given child device. Note that the binding does not require child nodes to be +present. Of course, child nodes are needed to probe the devices. + +Since each window is identified by its target ID and attribute ID there's +a special macro that can be use to simplify the translation entries: + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + +Using this macro, the above example would be: + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + + ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>; + }; + + /* other children */ + ... + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; + }; + + /* other children */ + ... + }; + }; + + +** About the window base address + +Remember the MBus controller allows a great deal of flexibility for choosing +the decoding window base address. When planning the device tree layout it's +possible to choose any address as the base address, provided of course there's +a region large enough available, and with the required alignment. + +Yet in other words: there's nothing preventing us from setting a base address +of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is +unused. + +** Window allocation policy + +The mbus-node ranges property defines a set of mbus windows that are expected +to be set by the operating system and that are guaranteed to be free of overlaps +with one another or with the system memory ranges. + +Each entry in the property refers to exactly one window. If the operating system +chooses to use a different set of mbus windows, it must ensure that any address +translations performed from downstream devices are adapted accordingly. + +The operating system may insert additional mbus windows that do not conflict +with the ones listed in the ranges, e.g. for mapping PCIe devices. +As a special case, the internal register window must be set up by the boot +loader at the address listed in the ranges property, since access to that region +is needed to set up the other windows. + +** Example + +See the example below, where a more complete device tree is shown: + + soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + controller = <&mbusc>; + + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 /* internal-regs */ + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; + }; + + devbus-bootcs { + ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; + + /* NOR */ + nor { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */ + 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>; + + + pcie@1,0 { + /* Port 0, Lane 0 */ + }; + }; + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; + }; + + interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt new file mode 100644 index 000000000..c1e706217 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt @@ -0,0 +1,128 @@ +Device tree bindings for NVIDIA Tegra Generic Memory Interface bus + +The Generic Memory Interface bus enables memory transfers between internal and +external memory. Can be used to attach various high speed devices such as +synchronous/asynchronous NOR, FPGA, UARTS and more. + +The actual devices are instantiated from the child nodes of a GMI node. + +Required properties: + - compatible : Should contain one of the following: + For Tegra20 must contain "nvidia,tegra20-gmi". + For Tegra30 must contain "nvidia,tegra30-gmi". + - reg: Should contain GMI controller registers location and length. + - clocks: Must contain an entry for each entry in clock-names. + - clock-names: Must include the following entries: "gmi" + - resets : Must contain an entry for each entry in reset-names. + - reset-names : Must include the following entries: "gmi" + - #address-cells: The number of cells used to represent physical base + addresses in the GMI address space. Should be 2. + - #size-cells: The number of cells used to represent the size of an address + range in the GMI address space. Should be 1. + - ranges: Must be set up to reflect the memory layout with three integer values + for each chip-select line in use (only one entry is supported, see below + comments): + <cs-number> <offset> <physical address of mapping> <size> + +Note that the GMI controller does not have any internal chip-select address +decoding, because of that chip-selects either need to be managed via software +or by employing external chip-select decoding logic. + +If external chip-select logic is used to support multiple devices it is assumed +that the devices use the same timing and so are probably the same type. It also +assumes that they can fit in the 256MB address range. In this case only one +child device is supported which represents the active chip-select line, see +examples for more insight. + +The chip-select number is decoded from the child nodes second address cell of +'ranges' property, if 'ranges' property is not present or empty chip-select will +then be decoded from the first cell of the 'reg' property. + +Optional child cs node properties: + + - nvidia,snor-data-width-32bit: Use 32bit data-bus, default is 16bit. + - nvidia,snor-mux-mode: Enable address/data MUX mode. + - nvidia,snor-rdy-active-before-data: Assert RDY signal one cycle before data. + If omitted it will be asserted with data. + - nvidia,snor-rdy-active-high: RDY signal is active high + - nvidia,snor-adv-active-high: ADV signal is active high + - nvidia,snor-oe-active-high: WE/OE signal is active high + - nvidia,snor-cs-active-high: CS signal is active high + + Note that there is some special handling for the timing values. + From Tegra TRM: + Programming 0 means 1 clock cycle: actual cycle = programmed cycle + 1 + + - nvidia,snor-muxed-width: Number of cycles MUX address/data asserted on the + bus. Valid values are 0-15, default is 1 + - nvidia,snor-hold-width: Number of cycles CE stays asserted after the + de-assertion of WR_N (in case of SLAVE/MASTER Request) or OE_N + (in case of MASTER Request). Valid values are 0-15, default is 1 + - nvidia,snor-adv-width: Number of cycles during which ADV stays asserted. + Valid values are 0-15, default is 1. + - nvidia,snor-ce-width: Number of cycles before CE is asserted. + Valid values are 0-15, default is 4 + - nvidia,snor-we-width: Number of cycles during which WE stays asserted. + Valid values are 0-15, default is 1 + - nvidia,snor-oe-width: Number of cycles during which OE stays asserted. + Valid values are 0-255, default is 1 + - nvidia,snor-wait-width: Number of cycles before READY is asserted. + Valid values are 0-255, default is 3 + +Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the +controllers with a simple-bus node since they are all connected to the same +chip-select (CS4), in this example external address decoding is provided: + +gmi@70009000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + ranges = <4 0 0xd0000000 0xfffffff>; + + bus@4,0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 4 0 0x40100>; + + nvidia,snor-mux-mode; + nvidia,snor-adv-active-high; + + can@0 { + reg = <0 0x100>; + ... + }; + + can@40000 { + reg = <0x40000 0x100>; + ... + }; + }; +}; + +Example with one SJA1000 CAN controller connected to the GMI bus +on CS4: + +gmi@70009000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + ranges = <4 0 0xd0000000 0xfffffff>; + + can@4,0 { + reg = <4 0 0x100>; + nvidia,snor-mux-mode; + nvidia,snor-adv-active-high; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml new file mode 100644 index 000000000..81a65e9f9 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/nvidia,tegra210-aconnect.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra ACONNECT Bus + +description: | + The Tegra ACONNECT bus is an AXI switch which is used to connect various + components inside the Audio Processing Engine (APE). All CPU accesses to + the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All + devices accessed via the ACONNECT are described by child-nodes. + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - const: nvidia,tegra210-aconnect + - items: + - enum: + - nvidia,tegra264-aconnect + - nvidia,tegra234-aconnect + - nvidia,tegra186-aconnect + - nvidia,tegra194-aconnect + - const: nvidia,tegra210-aconnect + + clocks: + items: + - description: Must contain the entry for APE clock + - description: Must contain the entry for APE interface clock + + clock-names: + items: + - const: ape + - const: apb2ape + + power-domains: + maxItems: 1 + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + +patternProperties: + "@[0-9a-f]+$": + type: object + +required: + - compatible + - clocks + - clock-names + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include<dt-bindings/clock/tegra210-car.h> + + aconnect@702c0000 { + compatible = "nvidia,tegra210-aconnect"; + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&pd_audio>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x702c0000 0x702c0000 0x00040000>; + + // Child device nodes follow ... + }; + +... diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt new file mode 100644 index 000000000..18729f6fe --- /dev/null +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt @@ -0,0 +1,29 @@ +* OMAP OCP2SCP - ocp interface to scp interface + +properties: +- compatible : Should be "ti,am437x-ocp2scp" for AM437x processor + Should be "ti,omap-ocp2scp" for all others +- reg : Address and length of the register set for the device +- #address-cells, #size-cells : Must be present if the device has sub-nodes +- ranges : the child address space are mapped 1:1 onto the parent address space +- ti,hwmods : must be "ocp2scp_usb_phy" + +Sub-nodes: +All the devices connected to ocp2scp are described using sub-node to ocp2scp + +ocp2scp@4a0ad000 { + compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp_usb_phy"; + + subnode1 { + ... + }; + + subnode2 { + ... + }; +}; diff --git a/Documentation/devicetree/bindings/bus/palmbus.yaml b/Documentation/devicetree/bindings/bus/palmbus.yaml new file mode 100644 index 000000000..c36c1e92a --- /dev/null +++ b/Documentation/devicetree/bindings/bus/palmbus.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/palmbus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink PalmBus + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + The ralink palmbus controller can be found in all ralink MIPS + SoCs. It provides an external bus for connecting multiple + external devices to the SoC. + +properties: + $nodename: + pattern: "^palmbus(@[0-9a-f]+)?$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + compatible: + const: palmbus + + reg: + maxItems: 1 + + ranges: true + +patternProperties: + # All other properties should be child nodes with unit-address and 'reg' + "@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + palmbus@1e000000 { + compatible = "palmbus"; + reg = <0x1e000000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000000 0x0fffff>; + + gpio@600 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "mediatek,mt7621-gpio"; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 95>; + interrupt-controller; + reg = <0x600 0x100>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml new file mode 100644 index 000000000..693cfa969 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Single-wire Serial Bus Interface (SSBI) + +description: + Some Qualcomm MSM devices contain a point-to-point serial bus used to + communicate with a limited range of devices (mostly power management + chips). + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + const: qcom,ssbi + + reg: + maxItems: 1 + + qcom,controller-type: + description: + Indicates the SSBI bus variant the controller should use to talk + with the slave device. The type chosen is determined by the attached + slave. + enum: + - ssbi + - ssbi2 + - pmic-arbiter + + pmic: + $ref: /schemas/mfd/qcom-pm8xxx.yaml# + +required: + - compatible + - reg + - qcom,controller-type + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pmic { + compatible = "qcom,pm8821"; + interrupt-parent = <&msmgpio>; + interrupts = <76 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml new file mode 100644 index 000000000..8e9e6ff35 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +description: | + This binding describes the dependencies (clocks, resets, power domains) which + need to be turned on in a sequence before communication over the AHB bus + becomes possible. + + Additionally, the reg property is used to pass to the driver the location of + two sadly undocumented registers which need to be poked as part of the sequence. + + The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart + controllers, a hexagon core, and a clock controller which provides clocks for + the above. + +properties: + compatible: + items: + - const: qcom,msm8998-ssc-block-bus + - const: qcom,ssc-block-bus + + reg: + items: + - description: SSCAON_CONFIG0 registers + - description: SSCAON_CONFIG1 registers + + reg-names: + items: + - const: mpm_sscaon_config0 + - const: mpm_sscaon_config1 + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: + maxItems: 6 + + clock-names: + items: + - const: xo + - const: aggre2 + - const: gcc_im_sleep + - const: aggre2_north + - const: ssc_xo + - const: ssc_ahbs + + power-domains: + items: + - description: CX power domain + - description: MX power domain + + power-domain-names: + items: + - const: ssc_cx + - const: ssc_mx + + resets: + items: + - description: Main reset + - description: + SSC Branch Control Register reset (associated with the ssc_xo and + ssc_ahbs clocks) + + reset-names: + items: + - const: ssc_reset + - const: ssc_bcr + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: describes how to locate the ssc AXI halt register + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offset for the ssc AXI halt register + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + + // devices under this node are physically located in the SSC block, connected to an ssc-internal bus; + ssc_ahb_slave: bus@10ac008 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus"; + reg = <0x10ac008 0x4>, <0x10ac010 0x4>; + reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1"; + + clocks = <&xo>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_IM_SLEEP>, + <&gcc AGGRE2_SNOC_NORTH_AXI>, + <&gcc SSC_XO>, + <&gcc SSC_CNOC_AHBS_CLK>; + clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs"; + + resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>; + reset-names = "ssc_reset", "ssc_bcr"; + + power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>; + power-domain-names = "ssc_cx", "ssc_mx"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x26000>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml new file mode 100644 index 000000000..ff3c78317 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml @@ -0,0 +1,74 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/renesas,bsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Bus State Controller (BSC) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus + Bridge", or "External Bus Interface") can be found in several Renesas ARM + SoCs. It provides an external bus for connecting multiple external + devices to the SoC, driving several chip select lines, for e.g. NOR + FLASH, Ethernet and USB. + + While the BSC is a fairly simple memory-mapped bus, it may be part of a + PM domain, and may have a gateable functional clock. Before a device + connected to the BSC can be accessed, the PM domain containing the BSC + must be powered on, and the functional clock driving the BSC must be + enabled. + + The bindings for the BSC extend the bindings for "simple-pm-bus". + +allOf: + - $ref: simple-pm-bus.yaml# + +properties: + compatible: + items: + - enum: + - renesas,bsc-r8a73a4 # R-Mobile APE6 (r8a73a4) + - renesas,bsc-sh73a0 # SH-Mobile AG5 (sh73a0) + - const: renesas,bsc + - {} # simple-pm-bus, but not listed here to avoid false select + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +patternProperties: + # All other properties should be child nodes with unit-address and 'reg' + "@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + bsc: bus@fec10000 { + compatible = "renesas,bsc-sh73a0", "renesas,bsc", "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20000000>; + reg = <0xfec10000 0x400>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&zb_clk>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml new file mode 100644 index 000000000..182134d7a --- /dev/null +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Power-Managed Bus + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + A Simple Power-Managed Bus is a transparent bus that doesn't need a real + driver, as it's typically initialized by the boot loader. + + However, its bus controller is part of a PM domain, or under the control + of a functional clock. Hence, the bus controller's PM domain and/or + clock must be enabled for child devices connected to the bus (either + on-SoC or externally) to function. + + While "simple-pm-bus" follows the "simple-bus" set of properties, as + specified in the Devicetree Specification, it is not an extension of + "simple-bus". + +properties: + $nodename: + pattern: "^bus(@[0-9a-f]+)?$" + + compatible: + contains: + const: simple-pm-bus + description: + Shall contain "simple-pm-bus" in addition to a optional bus-specific + compatible strings defined in individual pm-bus bindings. + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: true + # Functional clocks + # Required if power-domains is absent, optional otherwise + + power-domains: + # Required if clocks is absent, optional otherwise + minItems: 1 + +required: + - compatible + - '#address-cells' + - '#size-cells' + - ranges + +anyOf: + - required: + - clocks + - required: + - power-domains + +additionalProperties: true + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/interrupt-controller/irq.h> + + bus { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml new file mode 100644 index 000000000..49df13fc2 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier System Bus + +description: | + The UniPhier System Bus is an external bus that connects on-board devices to + the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and + some control signals. It supports up to 8 banks (chip selects). + + Before any access to the bus, the bus controller must be configured; the bus + controller registers provide the control for the translation from the offset + within each bank to the CPU-viewed address. The needed setup includes the + base address, the size of each bank. Optionally, some timing parameters can + be optimized for faster bus access. + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + const: socionext,uniphier-system-bus + + reg: + maxItems: 1 + + "#address-cells": + description: | + The first cell is the bank number (chip select). + The second cell is the address offset within the bank. + const: 2 + + "#size-cells": + const: 1 + + ranges: + description: | + Provide address translation from the System Bus to the parent bus. + + Note: + The address region(s) that can be assigned for the System Bus is + implementation defined. Some SoCs can use 0x00000000-0x0fffffff and + 0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff. + There might be additional limitations depending on SoCs and the boot mode. + The address translation is arbitrary as long as the banks are assigned in + the supported address space with the required alignment and they do not + overlap one another. + + For example, it is possible to map: + bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff + It is also possible to map: + bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff + There is no reason to stick to a particular translation mapping, but the + "ranges" property should provide a "reasonable" default that is known to + work. The software should initialize the bus controller according to it. + +patternProperties: + "^.*@[1-5],[1-9a-f][0-9a-f]+$": + description: Devices attached to chip selects + type: object + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, + // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and + // mapped to 0x43f00000 of the parent bus. + // - the UART device is connected at the offset 0x00200000 of CS5 and + // mapped to 0x46200000 of the parent bus. + + system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0x00000000 0x42000000 0x02000000>, + <5 0x00000000 0x46000000 0x01000000>; + + ethernet@1,1f00000 { + compatible = "smsc,lan9115"; + reg = <1 0x01f00000 0x1000>; + interrupts = <0 48 4>; + phy-mode = "mii"; + }; + + serial@5,200000 { + compatible = "ns16550a"; + reg = <5 0x00200000 0x20>; + interrupts = <0 49 4>; + clock-frequency = <12288000>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml new file mode 100644 index 000000000..bf0af3424 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Extended TrustZone protection controller + +description: | + The ETZPC configures TrustZone security in a SoC having bus masters and + devices with programmable-security attributes (securable resources). + +maintainers: + - Gatien Chevallier <gatien.chevallier@foss.st.com> + +select: + properties: + compatible: + contains: + const: st,stm32-etzpc + required: + - compatible + +properties: + compatible: + items: + - const: st,stm32-etzpc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its access + // controller. + // Access rights are verified before creating devices. + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp13-clks.h> + #include <dt-bindings/reset/stm32mp13-resets.h> + + etzpc: bus@5c007000 { + compatible = "st,stm32-etzpc", "simple-bus"; + reg = <0x5c007000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + access-controllers = <&etzpc 17>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp131-dbg-bus.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp131-dbg-bus.yaml new file mode 100644 index 000000000..6c74433ef --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32mp131-dbg-bus.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32mp131-dbg-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Coresight bus + +maintainers: + - Gatien Chevallier <gatien.chevallier@foss.st.com> + +description: + The STM32 debug bus is in charge of checking the debug configuration + of the platform before probing the peripheral drivers that rely on the debug + domain. + +properties: + compatible: + items: + - enum: + - st,stm32mp131-dbg-bus + - st,stm32mp151-dbg-bus + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + minItems: 1 + maxItems: 2 + + "#access-controller-cells": + const: 1 + description: + Contains the debug profile necessary to access the peripheral. + +patternProperties: + "@[0-9a-f]+$": + description: Debug related peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - "#access-controller-cells" + - "#address-cells" + - "#size-cells" + - compatible + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + + dbg_bus: bus@50080000 { + compatible = "st,stm32mp131-dbg-bus"; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges = <0x50080000 0x50080000 0x3f80000>; + + cti@50094000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x50094000 0x1000>; + clocks = <&rcc CK_DBG>; + clock-names = "apb_pclk"; + access-controllers = <&dbg_bus 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml new file mode 100644 index 000000000..c6280c8c5 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 Resource isolation framework security controller + +maintainers: + - Gatien Chevallier <gatien.chevallier@foss.st.com> + +description: | + Resource isolation framework (RIF) is a comprehensive set of hardware blocks + designed to enforce and manage isolation of STM32 hardware resources like + memory and peripherals. + + The RIFSC (RIF security controller) is composed of three sets of registers, + each managing a specific set of hardware resources: + - RISC registers associated with RISUP logic (resource isolation device unit + for peripherals), assign all non-RIF aware peripherals to zero, one or + any security domains (secure, privilege, compartment). + - RIMC registers: associated with RIMU logic (resource isolation master + unit), assign all non RIF-aware bus master to one security domain by + setting secure, privileged and compartment information on the system bus. + Alternatively, the RISUP logic controlling the device port access to a + peripheral can assign target bus attributes to this peripheral master port + (supported attribute: CID). + - RISC registers associated with RISAL logic (resource isolation device unit + for address space - Lite version), assign address space subregions to one + security domains (secure, privilege, compartment). + +select: + properties: + compatible: + contains: + enum: + - st,stm32mp21-rifsc + - st,stm32mp25-rifsc + required: + - compatible + +properties: + compatible: + items: + - enum: + - st,stm32mp21-rifsc + - st,stm32mp25-rifsc + - const: simple-bus + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + "#access-controller-cells": + const: 1 + description: + Contains the firewall ID associated to the peripheral. + +patternProperties: + "@[0-9a-f]+$": + description: Peripherals + type: object + + additionalProperties: true + + required: + - access-controllers + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + // In this example, the usart2 device refers to rifsc as its domain + // controller. + // Access rights are verified before creating devices. + + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rifsc: bus@42080000 { + compatible = "st,stm32mp25-rifsc", "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_flexgen_08>; + access-controllers = <&rifsc 32>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/ti,da850-mstpri.yaml b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.yaml new file mode 100644 index 000000000..5b03abd3f --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/ti,da850-mstpri.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DA8XX Master Peripheral Priority Registers + +maintainers: + - Eduard Bostina <egbostina@gmail.com> + +description: | + DA8XX SoCs feature a set of registers allowing to change the priority of all + peripherals classified as masters. + + Documentation: + OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf + +properties: + compatible: + const: ti,da850-mstpri + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + mstpri@14110 { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; + }; diff --git a/Documentation/devicetree/bindings/bus/ti,omap-l4.yaml b/Documentation/devicetree/bindings/bus/ti,omap-l4.yaml new file mode 100644 index 000000000..0b09fb919 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti,omap-l4.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/ti,omap-l4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP SoCs L4 interconnect bus + +maintainers: + - Eduard Bostina <egbostina@gmail.com> + +description: + These bindings describe the OMAP SoCs L4 interconnect bus. + +select: + properties: + compatible: + contains: + enum: + - ti,omap2-l4 + - ti,omap2-l4-wkup + - ti,omap3-l4-core + - ti,omap4-l4-abe + - ti,omap4-l4-cfg + - ti,omap4-l4-per + - ti,omap4-l4-wkup + - ti,omap5-l4-abe + - ti,omap5-l4-cfg + - ti,omap5-l4-per + - ti,omap5-l4-wkup + - ti,dra7-l4-cfg + - ti,dra7-l4-per1 + - ti,dra7-l4-per2 + - ti,dra7-l4-per3 + - ti,dra7-l4-wkup + - ti,am33xx-l4-fast + - ti,am33xx-l4-fw + - ti,am33xx-l4-mpuss + - ti,am33xx-l4-per + - ti,am33xx-l4-wkup + - ti,am4-l4-fast + - ti,am4-l4-per + - ti,am4-l4-wkup + - ti,dm814-l4hs + - ti,dm814-l4ls + required: + - compatible + +properties: + compatible: + items: + - enum: + - ti,omap2-l4 + - ti,omap2-l4-wkup + - ti,omap3-l4-core + - ti,omap4-l4-abe + - ti,omap4-l4-cfg + - ti,omap4-l4-per + - ti,omap4-l4-wkup + - ti,omap5-l4-abe + - ti,omap5-l4-cfg + - ti,omap5-l4-per + - ti,omap5-l4-wkup + - ti,dra7-l4-cfg + - ti,dra7-l4-per1 + - ti,dra7-l4-per2 + - ti,dra7-l4-per3 + - ti,dra7-l4-wkup + - ti,am33xx-l4-fast + - ti,am33xx-l4-fw + - ti,am33xx-l4-mpuss + - ti,am33xx-l4-per + - ti,am33xx-l4-wkup + - ti,am4-l4-fast + - ti,am4-l4-per + - ti,am4-l4-wkup + - ti,dm814-l4hs + - ti,dm814-l4ls + - enum: + - simple-bus + - simple-pm-bus + + reg: + minItems: 1 + maxItems: 6 + + reg-names: + minItems: 1 + maxItems: 6 + items: + enum: + - ap + - la + - ia0 + - ia1 + - ia2 + - ia3 + + ranges: true + + dma-ranges: true + + clocks: + maxItems: 1 + + clock-names: + items: + - const: fck + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +required: + - compatible + - ranges + +additionalProperties: + type: object + +examples: + - | + bus@48000000 { + compatible = "ti,omap4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x100000>; + }; diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml new file mode 100644 index 000000000..6d7bca6c1 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/ti-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments interconnect target module + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + Texas Instruments SoCs can have a generic interconnect target module + for devices connected to various interconnects such as L3 interconnect + using Arteris NoC, and L4 interconnect using Sonics s3220. This module + is mostly used for interaction between module and Power, Reset and Clock + Manager PRCM. It participates in the OCP Disconnect Protocol, but other + than that it is mostly independent of the interconnect. + + Each interconnect target module can have one or more devices connected to + it. There is a set of control registers for managing the interconnect target + module clocks, idle modes and interconnect level resets. + + The interconnect target module control registers are sprinkled into the + unused register address space of the first child device IP block managed by + the interconnect target module. Typically the register names are REVISION, + SYSCONFIG and SYSSTATUS. + +properties: + $nodename: + pattern: "^target-module(@[0-9a-f]+)?$" + + compatible: + oneOf: + - items: + - enum: + - ti,sysc-omap2 + - ti,sysc-omap4 + - ti,sysc-omap4-simple + - ti,sysc-omap2-timer + - ti,sysc-omap4-timer + - ti,sysc-omap3430-sr + - ti,sysc-omap3630-sr + - ti,sysc-omap4-sr + - ti,sysc-omap3-sham + - ti,sysc-omap-aes + - ti,sysc-mcasp + - ti,sysc-dra7-mcasp + - ti,sysc-usb-host-fs + - ti,sysc-dra7-mcan + - ti,sysc-pruss + - const: ti,sysc + - items: + - const: ti,sysc + + reg: + description: + Interconnect target module control registers consisting of + REVISION, SYSCONFIG and SYSSTATUS registers as defined in the + Technical Reference Manual for the SoC. + minItems: 1 + maxItems: 3 + + reg-names: + description: + Interconnect target module control register names consisting + of "rev", "sysc" and "syss". + oneOf: + - minItems: 1 + items: + - const: rev + - const: sysc + - const: syss + - items: + - const: rev + - const: syss + - enum: [ sysc, syss ] + + power-domains: + description: Target module power domain if available. + maxItems: 1 + + clocks: + description: + Target module clocks consisting of one functional clock, one + interface clock, and up to 8 module specific optional clocks. + Some modules may have only the functional clock, and some have + no configurable clocks. + minItems: 1 + maxItems: 4 + + clock-names: + description: + Target module clock names like "fck", "ick", "optck1", "optck2" + if the clocks are configurable. + oneOf: + - enum: [ ick, fck, sys_clk ] + - items: + - const: fck + - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ] + - items: + - const: fck + - const: phy-clk + - const: phy-clk-div + - items: + - const: fck + - const: hdmi_clk + - const: sys_clk + - const: tv_clk + - items: + - const: fck + - const: ahclkx + - const: ahclkr + + resets: + description: + Target module reset bit in the RSTCTRL register if wired for the module. + Note that the other reset bits should be mapped for the child device + driver to use. + maxItems: 1 + + reset-names: + description: + Target module reset names in the RSTCTRL register, typically named + "rstctrl" if only one reset bit is wired for the module. + items: + - const: rstctrl + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + dma-ranges: true + + ti,sysc-mask: + description: Mask of supported register bits for the SYSCONFIG register + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,sysc-midle: + description: List of hardware supported idle modes + $ref: /schemas/types.yaml#/definitions/uint32-array + + ti,sysc-sidle: + description: List of hardware supported idle modes + $ref: /schemas/types.yaml#/definitions/uint32-array + + ti,syss-mask: + description: Mask of supported register bits for the SYSSTATUS register + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,sysc-delay-us: + description: Delay needed after OCP softreset before accessing SYCONFIG + default: 0 + minimum: 0 + maximum: 2 + + ti,no-reset-on-init: + description: Interconnect target module shall not be reset at init + type: boolean + + ti,no-idle-on-init: + description: Interconnect target module shall not be idled at init + type: boolean + + ti,no-idle: + description: Interconnect target module shall not be idled + type: boolean + + ti,hwmods: + description: Interconnect module name to use with legacy hwmod data + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +required: + - compatible + - '#address-cells' + - '#size-cells' + - ranges + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/bus/ti-sysc.h> + #include <dt-bindings/clock/omap4.h> + + target-module@2b000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2b000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt new file mode 100644 index 000000000..2a10d065b --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt @@ -0,0 +1,50 @@ +Technologic Systems NBUS + +The NBUS is a bus used to interface with peripherals in the Technologic +Systems FPGA on the TS-4600 SoM. + +Required properties : + - compatible : "technologic,ts-nbus" + - #address-cells : must be 1 + - #size-cells : must be 0 + - pwms : The PWM bound to the FPGA + - ts,data-gpios : The 8 GPIO pins connected to the data lines on the FPGA + - ts,csn-gpios : The GPIO pin connected to the csn line on the FPGA + - ts,txrx-gpios : The GPIO pin connected to the txrx line on the FPGA + - ts,strobe-gpios : The GPIO pin connected to the stobe line on the FPGA + - ts,ale-gpios : The GPIO pin connected to the ale line on the FPGA + - ts,rdy-gpios : The GPIO pin connected to the rdy line on the FPGA + +Child nodes: + +The NBUS node can contain zero or more child nodes representing peripherals +on the bus. + +Example: + + nbus { + compatible = "technologic,ts-nbus"; + pinctrl-0 = <&nbus_pins>; + #address-cells = <1>; + #size-cells = <0>; + pwms = <&pwm 2 83>; + ts,data-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH + &gpio0 1 GPIO_ACTIVE_HIGH + &gpio0 2 GPIO_ACTIVE_HIGH + &gpio0 3 GPIO_ACTIVE_HIGH + &gpio0 4 GPIO_ACTIVE_HIGH + &gpio0 5 GPIO_ACTIVE_HIGH + &gpio0 6 GPIO_ACTIVE_HIGH + &gpio0 7 GPIO_ACTIVE_HIGH>; + ts,csn-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + ts,txrx-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + ts,ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + ts,rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + + watchdog@2a { + compatible = "..."; + + /* ... */ + }; + }; diff --git a/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml new file mode 100644 index 000000000..7f62ffbdc --- /dev/null +++ b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/xlnx,versal-net-cdx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD CDX bus controller + +description: | + CDX bus controller for AMD devices is implemented to dynamically + detect CDX bus and devices using the firmware. + The CDX bus manages multiple FPGA based hardware devices, which + can support network, crypto or any other specialized type of + devices. These FPGA based devices can be added/modified dynamically + on run-time. + + All devices on the CDX bus will have a unique streamid (for IOMMU) + and a unique device ID (for MSI) corresponding to a requestor ID + (one to one associated with the device). The streamid and deviceid + are used to configure SMMU and GIC-ITS respectively. + + iommu-map property is used to define the set of stream ids + corresponding to each device and the associated IOMMU. + + The MSI writes are accompanied by sideband data (Device ID). + The msi-map property is used to associate the devices with the + device ID as well as the associated ITS controller. + + rproc property (xlnx,rproc) is used to identify the remote processor + with which APU (Application Processor Unit) interacts to find out + the bus and device configuration. + +maintainers: + - Nipun Gupta <nipun.gupta@amd.com> + - Nikhil Agarwal <nikhil.agarwal@amd.com> + +properties: + compatible: + const: xlnx,versal-net-cdx + + iommu-map: true + + msi-map: true + + xlnx,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the remoteproc_r5 rproc node using which APU interacts + with remote processor. + + ranges: true + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + +required: + - compatible + - iommu-map + - msi-map + - xlnx,rproc + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + cdx { + compatible = "xlnx,versal-net-cdx"; + #address-cells = <1>; + #size-cells = <1>; + /* define map for RIDs 250-259 */ + iommu-map = <250 &smmu 250 10>; + /* define msi map for RIDs 250-259 */ + msi-map = <250 &its 250 10>; + xlnx,rproc = <&remoteproc_r5>; + ranges; + }; |