ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted

make htmldocs fails with:

  Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
  ERROR: Unexpected indentation. [docutils]

The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.

Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.

Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.

Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>

7 files changed, 486 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
new file mode 100644
index 000000000..51d68a778
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/arm,versatile-lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Character LCD
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+  - Rob Herring <robh@kernel.org>
+
+description:
+  This binding defines the character LCD interface found on ARM Versatile AB
+  and PB reference platforms.
+
+properties:
+  compatible:
+    const: arm,versatile-lcd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd@10008000 {
+        compatible = "arm,versatile-lcd";
+        reg = <0x10008000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml
new file mode 100644
index 000000000..328954893
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO based LED segment display
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: gpio-7-segment
+
+  segment-gpios:
+    description: |
+      An array of GPIOs one per segment. The first GPIO corresponds to the A
+      segment, the seventh GPIO corresponds to the G segment. Some LED blocks
+      also have a decimal point which can be specified as an optional eighth
+      segment.
+
+               -a-
+              |   |
+              f   b
+              |   |
+               -g-
+              |   |
+              e   c
+              |   |
+               -d-  dp
+
+    minItems: 7
+    maxItems: 8
+
+required:
+  - segment-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+
+    led-7seg {
+        compatible = "gpio-7-segment";
+        segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                        <&gpio 1 GPIO_ACTIVE_LOW>,
+                        <&gpio 2 GPIO_ACTIVE_LOW>,
+                        <&gpio 3 GPIO_ACTIVE_LOW>,
+                        <&gpio 4 GPIO_ACTIVE_LOW>,
+                        <&gpio 5 GPIO_ACTIVE_LOW>,
+                        <&gpio 6 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
new file mode 100644
index 000000000..3ca0e9863
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hitachi HD44780 Character LCD Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+
+description:
+  The Hitachi HD44780 Character LCD Controller is commonly used on character
+  LCDs that can display one or more lines of text. It exposes an M6800 bus
+  interface, which can be used in either 4-bit or 8-bit mode. By using a
+  GPIO expander it is possible to use the driver with one of the popular I2C
+  expander boards based on the PCF8574 available for these displays. For
+  an example see below.
+
+properties:
+  compatible:
+    const: hit,hd44780
+
+  data-gpios:
+    description:
+      GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or
+      DB4-DB7 (4-bit mode) of the LCD Controller's bus interface.
+    oneOf:
+      - maxItems: 4
+      - maxItems: 8
+
+  enable-gpios:
+    description:
+      GPIO pin connected to the "E" (Enable) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rs-gpios:
+    description:
+      GPIO pin connected to the "RS" (Register Select) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rw-gpios:
+    description:
+      GPIO pin connected to the "RW" (Read/Write) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  backlight-gpios:
+    description: GPIO pin used for enabling the LCD's backlight.
+    maxItems: 1
+
+  display-height-chars:
+    description: Height of the display, in character cells,
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+
+  display-width-chars:
+    description: Width of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+  internal-buffer-width:
+    description:
+      Internal buffer width (default is 40 for displays with 1 or 2 lines, and
+      display-width-chars for displays with more than 2 lines).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+required:
+  - compatible
+  - data-gpios
+  - enable-gpios
+  - rs-gpios
+  - display-height-chars
+  - display-width-chars
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    display-controller {
+        compatible = "hit,hd44780";
+
+        data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                     <&hc595 1 GPIO_ACTIVE_HIGH>,
+                     <&hc595 2 GPIO_ACTIVE_HIGH>,
+                     <&hc595 3 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+        display-height-chars = <2>;
+        display-width-chars = <16>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcf8574: gpio-expander@27 {
+            compatible = "nxp,pcf8574";
+            reg = <0x27>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+    display-controller {
+        compatible = "hit,hd44780";
+        display-height-chars = <2>;
+        display-width-chars = <16>;
+        data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 5 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 6 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 7 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>;
+        rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>;
+        backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
new file mode 100644
index 000000000..1d2e2429b
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Holtek HT16K33 RAM mapping 16*8 LED controller with keyscan
+
+maintainers:
+  - Robin van der Gracht <robin@protonic.nl>
+
+allOf:
+  - $ref: /schemas/input/input.yaml#
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - adafruit,3108  # 0.56" 4-Digit 7-Segment FeatherWing Display (Red)
+              - adafruit,3130  # 0.54" Quad Alphanumeric FeatherWing Display (Red)
+          - const: holtek,ht16k33
+
+      - const: holtek,ht16k33     # Generic 16*8 LED controller with dot-matrix display
+
+  reg:
+    maxItems: 1
+
+  refresh-rate-hz:
+    maxItems: 1
+    description: Display update interval in Hertz for dot-matrix displays
+
+  interrupts:
+    maxItems: 1
+
+  debounce-delay-ms: true
+
+  linux,keymap: true
+
+  linux,no-autorepeat:
+    type: boolean
+    description: Disable keyrepeat
+
+  default-brightness-level:
+    minimum: 1
+    maximum: 16
+    default: 16
+    description: Initial brightness level
+
+  led:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      const: holtek,ht16k33
+then:
+  required:
+    - refresh-rate-hz
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@70 {
+            compatible = "holtek,ht16k33";
+            reg = <0x70>;
+            refresh-rate-hz = <20>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+            debounce-delay-ms = <50>;
+            linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                           <MATRIX_KEY(3, 0, KEY_F8)>,
+                           <MATRIX_KEY(4, 0, KEY_F10)>,
+                           <MATRIX_KEY(5, 0, KEY_F4)>,
+                           <MATRIX_KEY(6, 0, KEY_F2)>,
+                           <MATRIX_KEY(2, 1, KEY_F5)>,
+                           <MATRIX_KEY(3, 1, KEY_F7)>,
+                           <MATRIX_KEY(4, 1, KEY_F9)>,
+                           <MATRIX_KEY(5, 1, KEY_F3)>,
+                           <MATRIX_KEY(6, 1, KEY_F1)>;
+
+            led {
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_BACKLIGHT;
+                linux,default-trigger = "backlight";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
new file mode 100644
index 000000000..55e9831b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/img,ascii-lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASCII LCD displays on Imagination Technologies boards
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - img,boston-lcd
+      - mti,malta-lcd
+      - mti,sead3-lcd
+
+  reg:
+    maxItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset in bytes to the LCD registers within the system controller
+
+required:
+  - compatible
+
+oneOf:
+  - required:
+      - reg
+  - required:
+      - offset
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: img,boston-lcd
+then:
+  required:
+    - reg
+else:
+  required:
+    - offset
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd: lcd@17fff000 {
+        compatible = "img,boston-lcd";
+        reg = <0x17fff000 0x8>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml
new file mode 100644
index 000000000..20dd9e8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX6958/6959 7-segment LED display controller
+
+maintainers:
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+description:
+  The Maxim MAX6958/6959 7-segment LED display controller provides
+  an I2C interface to up to four 7-segment LED digits. The MAX6959,
+  in comparison to MAX6958, adds input support. Type of the chip can
+  be autodetected via specific register read, and hence the features
+  may be enabled in the driver at run-time, in case they are requested
+  via Device Tree. A given hardware is simple and does not provide
+  any additional pins, such as reset or power enable.
+
+properties:
+  compatible:
+    const: maxim,max6959
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@38 {
+            compatible = "maxim,max6959";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml
new file mode 100644
index 000000000..a1d55a263
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/modtronix,lcd2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Modtronix engineering LCD2S Character LCD Display
+
+maintainers:
+  - Lars Poeschel <poeschel@lemonage.de>
+
+description:
+  The LCD2S is a Character LCD Display manufactured by Modtronix Engineering.
+  The display supports a serial I2C and SPI interface. The driver currently
+  only supports the I2C interface.
+
+properties:
+  compatible:
+    const: modtronix,lcd2s
+
+  reg:
+    maxItems: 1
+    description:
+      I2C bus address of the display.
+
+  display-height-chars:
+    description: Height of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+
+  display-width-chars:
+    description: Width of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 16
+    maximum: 20
+
+required:
+  - compatible
+  - reg
+  - display-height-chars
+  - display-width-chars
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lcd2s: auxdisplay@28 {
+        compatible = "modtronix,lcd2s";
+        reg = <0x28>;
+        display-height-chars = <4>;
+        display-width-chars = <20>;
+      };
+    };