iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

6 files changed, 82 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arc/axs101.txt b/Documentation/devicetree/bindings/arc/axs101.txt
new file mode 100644
index 000000000..48290d517
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/axs101.txt
@@ -0,0 +1,7 @@
+Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+SDP Main Board with an AXC001 CPU Card hoisting ARC700 core in silicon
+
+Required root node properties:
+    - compatible = "snps,axs101", "snps,arc-sdp";
diff --git a/Documentation/devicetree/bindings/arc/axs103.txt b/Documentation/devicetree/bindings/arc/axs103.txt
new file mode 100644
index 000000000..6eea862e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/axs103.txt
@@ -0,0 +1,8 @@
+Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+SDP Main Board with an AXC003 FPGA Card which can contain various flavours of
+HS38x cores.
+
+Required root node properties:
+    - compatible = "snps,axs103", "snps,arc-sdp";
diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
new file mode 100644
index 000000000..1aa50c640
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/eznps.txt
@@ -0,0 +1,7 @@
+EZchip NPS Network Processor Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+Appliance main board with NPS400 ASIC.
+
+Required root node properties:
+    - compatible = "ezchip,arc-nps";
diff --git a/Documentation/devicetree/bindings/arc/hsdk.txt b/Documentation/devicetree/bindings/arc/hsdk.txt
new file mode 100644
index 000000000..be50654bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/hsdk.txt
@@ -0,0 +1,7 @@
+Synopsys DesignWare ARC HS Development Kit Device Tree Bindings
+---------------------------------------------------------------------------
+
+ARC HSDK Board with quad-core ARC HS38x4 in silicon.
+
+Required root node properties:
+    - compatible = "snps,hsdk";
diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt
new file mode 100644
index 000000000..4e874d9a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/pct.txt
@@ -0,0 +1,20 @@
+* ARC Performance Counters
+
+The ARC700 can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits. Like conventional PCT there
+are 100+ hardware conditions dynamically mapped to up to 32 counters
+
+Note that:
+ * The ARC 700 PCT does not support interrupts; although HW events may be
+   counted, the HW events themselves cannot serve as a trigger for a sample.
+
+Required properties:
+
+- compatible : should contain
+	"snps,arc700-pct"
+
+Example:
+
+pmu {
+        compatible = "snps,arc700-pct";
+};
diff --git a/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml b/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml
new file mode 100644
index 000000000..532f7584f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arc/snps,archs-pct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC HS Performance Counters
+
+maintainers:
+  - Aryabhatta Dey <aryabhattadey35@gmail.com>
+
+description:
+  The ARC HS can be configured with a pipeline performance monitor for counting
+  CPU and cache events like cache misses and hits. Like conventional PCT there
+  are 100+ hardware conditions dynamically mapped to up to 32 counters.
+  It also supports overflow interrupts.
+
+properties:
+  compatible:
+    const: snps,archs-pct
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false