sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling buggrafted

alb_break_llc() decides whether to break LLC preference during active
load balance. It does so by testing that every runnable fair task on the
source rq prefers its LLC:

	env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable

But the two counters cover different sets. nr_pref_llc_running is updated
in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued,
so it follows queued tasks. h_nr_runnable is updated in set_delayed()/
clear_delayed() and drops delay-dequeued tasks.

So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted
in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks,
alb_break_llc() returns false, and active balance is free to pull a task
off its preferred LLC. Active balance only moves runnable tasks, and this
is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB
skips the per-task test in can_migrate_task(). The runnable set is the one
we want.

Fix it on the counter side. A task should be counted in
nr_pref_llc_running exactly while it is both queued on its preferred LLC
(pref_llc_queued) and runnable (!sched_delayed). Define that membership
once in task_pref_llc_runnable(), and adjust the counter only through
pref_llc_running_inc()/pref_llc_running_dec() from the four sites that
change either input: account_llc_enqueue(), account_llc_dequeue(),
set_delayed() and clear_delayed(). Gating every update on the same
predicate keeps the delay, wake and dequeue paths from double-counting
or underflowing; see the comments at those sites for the ordering.

nr_llc_running and sd->llc_counts are not touched and stay on queued
semantics.

Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC")
Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/
Reported-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kayra Cizmeci <kayracizmeci@gmail.com>
Cc: <stable@kernel.org> # v7.2.x
Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com

1 files changed, 187 insertions, 0 deletions

diff --git a/Documentation/dev-tools/propeller.rst b/Documentation/dev-tools/propeller.rst
new file mode 100644
index 000000000..e92731994
--- /dev/null
+++ b/Documentation/dev-tools/propeller.rst
@@ -0,0 +1,187 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Using Propeller with the Linux kernel
+=====================================
+
+This enables Propeller build support for the kernel when using Clang
+compiler. Propeller is a profile-guided optimization (PGO) method used
+to optimize binary executables. Like AutoFDO, it utilizes hardware
+sampling to gather information about the frequency of execution of
+different code paths within a binary. Unlike AutoFDO, this information
+is then used right before linking phase to optimize (among others)
+block layout within and across functions.
+
+A few important notes about adopting Propeller optimization:
+
+#. Although it can be used as a standalone optimization step, it is
+   strongly recommended to apply Propeller on top of AutoFDO,
+   AutoFDO+ThinLTO or Instrument FDO. The rest of this document
+   assumes this paradigm.
+
+#. Propeller uses another round of profiling on top of
+   AutoFDO/AutoFDO+ThinLTO/iFDO. The whole build process involves
+   "build-afdo - train-afdo - build-propeller - train-propeller -
+   build-optimized".
+
+#. Propeller requires LLVM 19 release or later for Clang/Clang++
+   and the linker(ld.lld).
+
+#. In addition to LLVM toolchain, Propeller requires a profiling
+   conversion tool: https://github.com/google/llvm-propeller.
+
+Current supported architectures include x86/X86_64 (via LBR),
+and arm64 (via SPE).
+
+The Propeller optimization process involves the following steps:
+
+#. Initial building: Build the AutoFDO or AutoFDO+ThinLTO binary as
+   you would normally do, but with a set of compile-time / link-time
+   flags, so that a special metadata section is created within the
+   kernel binary. The special section is only intend to be used by the
+   profiling tool, it is not part of the runtime image, nor does it
+   change kernel run time text sections.
+
+#. Profiling: The above kernel is then run with a representative
+   workload to gather execution frequency data. This data is collected
+   using hardware sampling, via perf. Propeller is most effective on
+   platforms supporting advanced PMU features like LBR on Intel
+   machines. This step is the same as profiling the kernel for AutoFDO
+   (the exact perf parameters can be different).
+
+#. Propeller profile generation: Perf output file is converted to a
+   pair of Propeller profiles via an offline tool.
+
+#. Optimized build: Build the AutoFDO or AutoFDO+ThinLTO optimized
+   binary as you would normally do, but with a compile-time /
+   link-time flag to pick up the Propeller compile time and link time
+   profiles. This build step uses 3 profiles - the AutoFDO profile,
+   the Propeller compile-time profile and the Propeller link-time
+   profile.
+
+#. Deployment: The optimized kernel binary is deployed and used
+   in production environments, providing improved performance
+   and reduced latency.
+
+Preparation
+===========
+
+Configure the kernel with::
+
+   CONFIG_AUTOFDO_CLANG=y
+   CONFIG_PROPELLER_CLANG=y
+
+Customization
+=============
+
+The default CONFIG_PROPELLER_CLANG setting covers kernel space objects
+for Propeller builds. One can, however, enable or disable Propeller build
+for individual files and directories by adding a line similar to the
+following to the respective kernel Makefile:
+
+- For enabling a single file (e.g. foo.o)::
+
+   PROPELLER_PROFILE_foo.o := y
+
+- For enabling all files in one directory::
+
+   PROPELLER_PROFILE := y
+
+- For disabling one file::
+
+   PROPELLER_PROFILE_foo.o := n
+
+- For disabling all files in one directory::
+
+   PROPELLER__PROFILE := n
+
+
+Workflow
+========
+
+Here is an example workflow for building an AutoFDO+Propeller kernel:
+
+1) Assuming an AutoFDO profile is already collected following
+   instructions in the AutoFDO document, build the kernel on the host
+   machine, with AutoFDO and Propeller build configs ::
+
+      CONFIG_AUTOFDO_CLANG=y
+      CONFIG_PROPELLER_CLANG=y
+
+   and ::
+
+      $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo-profile-name>
+
+2) Install the kernel on the test machine.
+
+3) Run the load tests. The '-c' option in perf specifies the sample
+   event period. We suggest using a suitable prime number, like 500009,
+   for this purpose.
+
+   - For Intel platforms::
+
+      $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> -o <perf_file> -- <loadtest>
+
+   - For AMD platforms::
+
+      $ perf record --pfm-event RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a -N -b -c <count> -o <perf_file> -- <loadtest>
+
+   - For arm64 with SPE::
+     There are a few kernel features that must be enabled to collect SPE profiles on Arm.
+     Below is a list of the required features:
+
+      - CONFIG_ARM_SPE_PMU=y
+      - CONFIG_PID_IN_CONTEXTIDR=y
+      - kpti=off
+
+     Use the following command to generate SPE perf data file::
+
+      $ perf record -e 'arm_spe_0/branch_filter=1,load_filter=0,store_filter=0/' -a -N -c <count> --no-switch-events -o <perf_file> -- <loadtest>
+
+     Note you can repeat the above steps to collect multiple <perf_file>s.
+
+4) (Optional) Download the raw perf file(s) to the host machine.
+
+5) Use the generate_propeller_profiles tool (https://github.com/google/llvm-propeller) to
+   generate Propeller profile. ::
+
+      $ generate_propeller_profiles \
+             --binary=<vmlinux> --profile=<perf_file> \
+             --format=propeller --propeller_output_module_name \
+             --out=<propeller_profile_prefix>_cc_profile.txt \
+             --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
+
+   "<propeller_profile_prefix>" can be something like "/home/user/dir/any_string".
+
+   This command generates a pair of Propeller profiles:
+   "<propeller_profile_prefix>_cc_profile.txt" and
+   "<propeller_profile_prefix>_ld_profile.txt".
+
+   If there are more than 1 perf_file collected in the previous step,
+   you can create a temp list file "<perf_file_list>" with each line
+   containing one perf file name and run::
+
+      $ generate_propeller_profiles \
+             --binary=<vmlinux> --profile=@<perf_file_list> \
+             --format=propeller --propeller_output_module_name \
+             --out=<propeller_profile_prefix>_cc_profile.txt \
+             --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
+
+   For arm64 SPE, add the option '--profiler=perf_spe', like::
+
+      $ generate_propeller_profiles  \
+             --binary=<vmlinux> --profile=<perf_file> \
+             --profiler=perf_spe \
+             --format=propeller --propeller_output_module_name \
+             --out=<propeller_profile_prefix>_cc_profile.txt \
+             --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
+
+6) Rebuild the kernel using the AutoFDO and Propeller
+   profiles. ::
+
+      CONFIG_AUTOFDO_CLANG=y
+      CONFIG_PROPELLER_CLANG=y
+
+   and ::
+
+      $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<profile_file> CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>