Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 84 insertions, 0 deletions

diff --git a/Documentation/bpf/linux-notes.rst b/Documentation/bpf/linux-notes.rst
new file mode 100644
index 000000000..00d2693de
--- /dev/null
+++ b/Documentation/bpf/linux-notes.rst
@@ -0,0 +1,84 @@
+.. contents::
+.. sectnum::
+
+==========================
+Linux implementation notes
+==========================
+
+This document provides more details specific to the Linux kernel implementation of the eBPF instruction set.
+
+Byte swap instructions
+======================
+
+``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and ``BPF_TO_BE`` respectively.
+
+Jump instructions
+=================
+
+``BPF_CALL | BPF_X | BPF_JMP`` (0x8d), where the helper function
+integer would be read from a specified register, is not currently supported
+by the verifier.  Any programs with this instruction will fail to load
+until such support is added.
+
+Maps
+====
+
+Linux only supports the 'map_val(map)' operation on array maps with a single element.
+
+Linux uses an fd_array to store maps associated with a BPF program. Thus,
+map_by_idx(imm) uses the fd at that index in the array.
+
+Variables
+=========
+
+The following 64-bit immediate instruction specifies that a variable address,
+which corresponds to some integer stored in the 'imm' field, should be loaded:
+
+=========================  ======  ===  =========================================  ===========  ==============
+opcode construction        opcode  src  pseudocode                                 imm type     dst type
+=========================  ======  ===  =========================================  ===========  ==============
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x3  dst = var_addr(imm)                        variable id  data pointer
+=========================  ======  ===  =========================================  ===========  ==============
+
+On Linux, this integer is a BTF ID.
+
+Legacy BPF Packet access instructions
+=====================================
+
+As mentioned in the `ISA standard documentation
+<instruction-set.html#legacy-bpf-packet-access-instructions>`_,
+Linux has special eBPF instructions for access to packet data that have been
+carried over from classic BPF to retain the performance of legacy socket
+filters running in the eBPF interpreter.
+
+The instructions come in two forms: ``BPF_ABS | <size> | BPF_LD`` and
+``BPF_IND | <size> | BPF_LD``.
+
+These instructions are used to access packet data and can only be used when
+the program context is a pointer to a networking packet.  ``BPF_ABS``
+accesses packet data at an absolute offset specified by the immediate data
+and ``BPF_IND`` access packet data at an offset that includes the value of
+a register in addition to the immediate data.
+
+These instructions have seven implicit operands:
+
+* Register R6 is an implicit input that must contain a pointer to a
+  struct sk_buff.
+* Register R0 is an implicit output which contains the data fetched from
+  the packet.
+* Registers R1-R5 are scratch registers that are clobbered by the
+  instruction.
+
+These instructions have an implicit program exit condition as well. If an
+eBPF program attempts access data beyond the packet boundary, the
+program execution will be aborted.
+
+``BPF_ABS | BPF_W | BPF_LD`` (0x20) means::
+
+  R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + imm))
+
+where ``ntohl()`` converts a 32-bit value from network byte order to host byte order.
+
+``BPF_IND | BPF_W | BPF_LD`` (0x40) means::
+
+  R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + src + imm))