staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 119 insertions, 0 deletions

diff --git a/Documentation/block/pr.rst b/Documentation/block/pr.rst
new file mode 100644
index 000000000..c893d6da8
--- /dev/null
+++ b/Documentation/block/pr.rst
@@ -0,0 +1,119 @@
+===============================================
+Block layer support for Persistent Reservations
+===============================================
+
+The Linux kernel supports a user space interface for simplified
+Persistent Reservations which map to block devices that support
+these (like SCSI). Persistent Reservations allow restricting
+access to block devices to specific initiators in a shared storage
+setup.
+
+This document gives a general overview of the support ioctl commands.
+For a more detailed reference please refer to the SCSI Primary
+Commands standard, specifically the section on Reservations and the
+"PERSISTENT RESERVE IN" and "PERSISTENT RESERVE OUT" commands.
+
+All implementations are expected to ensure the reservations survive
+a power loss and cover all connections in a multi path environment.
+These behaviors are optional in SPC but will be automatically applied
+by Linux.
+
+
+The following types of reservations are supported:
+--------------------------------------------------
+
+ - PR_WRITE_EXCLUSIVE
+	Only the initiator that owns the reservation can write to the
+	device.  Any initiator can read from the device.
+
+ - PR_EXCLUSIVE_ACCESS
+	Only the initiator that owns the reservation can access the
+	device.
+
+ - PR_WRITE_EXCLUSIVE_REG_ONLY
+	Only initiators with a registered key can write to the device,
+	Any initiator can read from the device.
+
+ - PR_EXCLUSIVE_ACCESS_REG_ONLY
+	Only initiators with a registered key can access the device.
+
+ - PR_WRITE_EXCLUSIVE_ALL_REGS
+
+	Only initiators with a registered key can write to the device,
+	Any initiator can read from the device.
+	All initiators with a registered key are considered reservation
+	holders.
+	Please reference the SPC spec on the meaning of a reservation
+	holder if you want to use this type.
+
+ - PR_EXCLUSIVE_ACCESS_ALL_REGS
+	Only initiators with a registered key can access the device.
+	All initiators with a registered key are considered reservation
+	holders.
+	Please reference the SPC spec on the meaning of a reservation
+	holder if you want to use this type.
+
+
+The following ioctl are supported:
+----------------------------------
+
+1. IOC_PR_REGISTER
+^^^^^^^^^^^^^^^^^^
+
+This ioctl command registers a new reservation if the new_key argument
+is non-null.  If no existing reservation exists old_key must be zero,
+if an existing reservation should be replaced old_key must contain
+the old reservation key.
+
+If the new_key argument is 0 it unregisters the existing reservation passed
+in old_key.
+
+
+2. IOC_PR_RESERVE
+^^^^^^^^^^^^^^^^^
+
+This ioctl command reserves the device and thus restricts access for other
+devices based on the type argument.  The key argument must be the existing
+reservation key for the device as acquired by the IOC_PR_REGISTER,
+IOC_PR_REGISTER_IGNORE, IOC_PR_PREEMPT or IOC_PR_PREEMPT_ABORT commands.
+
+
+3. IOC_PR_RELEASE
+^^^^^^^^^^^^^^^^^
+
+This ioctl command releases the reservation specified by key and flags
+and thus removes any access restriction implied by it.
+
+
+4. IOC_PR_PREEMPT
+^^^^^^^^^^^^^^^^^
+
+This ioctl command releases the existing reservation referred to by
+old_key and replaces it with a new reservation of type for the
+reservation key new_key.
+
+
+5. IOC_PR_PREEMPT_ABORT
+^^^^^^^^^^^^^^^^^^^^^^^
+
+This ioctl command works like IOC_PR_PREEMPT except that it also aborts
+any outstanding command sent over a connection identified by old_key.
+
+6. IOC_PR_CLEAR
+^^^^^^^^^^^^^^^
+
+This ioctl command unregisters both key and any other reservation key
+registered with the device and drops any existing reservation.
+
+
+Flags
+-----
+
+All the ioctls have a flag field.  Currently only one flag is supported:
+
+ - PR_FL_IGNORE_KEY
+	Ignore the existing reservation key.  This is commonly supported for
+	IOC_PR_REGISTER, and some implementation may support the flag for
+	IOC_PR_RESERVE.
+
+For all unknown flags the kernel will return -EOPNOTSUPP.