objtool: Validate disassembler headers in libopcodes probegrafted

commit 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
tested for libopcodes availability by linking a test snippet with a forward
declaration of disassemble_init_for_target().

However, testing symbol linkage with an extern declaration only verifies
the presence of the library (.so/.a) and bypasses checking for development
headers (binutils-dev). On systems where libopcodes is present without
development headers installed, the probe succeeds, enabling BUILD_DISAS.
Subsequent compilation of objtool then fails:

  fatal error: 'bfd.h' file not found
    113 | #include <bfd.h>

Additionally, the probe invokes $(HOSTCC) without $(HOSTCFLAGS), ignoring
any sysroot or include flags specified for the host compiler.

Fix this by including <bfd.h> and <dis-asm.h> directly in the test snippet,
passing $(HOSTCFLAGS) so host compiler options are respected, and defining
PACKAGE="objtool" to satisfy the configuration check in <bfd.h>.

Fixes: 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
Fixes: 436326bc525d ("objtool: fix build failure due to missing libopcodes check")
Reported-by: Alice Ryhl <aliceryhl@google.com>
Assisted-by: Antigravity:Gemini-Next
Signed-off-by: Ulises Mendez Martinez <umendez@google.com>
Link: https://patch.msgid.link/20260904150710.2997558-1-umendez@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>

1 files changed, 119 insertions, 0 deletions

diff --git a/Documentation/block/pr.rst b/Documentation/block/pr.rst
new file mode 100644
index 000000000..c893d6da8
--- /dev/null
+++ b/Documentation/block/pr.rst
@@ -0,0 +1,119 @@
+===============================================
+Block layer support for Persistent Reservations
+===============================================
+
+The Linux kernel supports a user space interface for simplified
+Persistent Reservations which map to block devices that support
+these (like SCSI). Persistent Reservations allow restricting
+access to block devices to specific initiators in a shared storage
+setup.
+
+This document gives a general overview of the support ioctl commands.
+For a more detailed reference please refer to the SCSI Primary
+Commands standard, specifically the section on Reservations and the
+"PERSISTENT RESERVE IN" and "PERSISTENT RESERVE OUT" commands.
+
+All implementations are expected to ensure the reservations survive
+a power loss and cover all connections in a multi path environment.
+These behaviors are optional in SPC but will be automatically applied
+by Linux.
+
+
+The following types of reservations are supported:
+--------------------------------------------------
+
+ - PR_WRITE_EXCLUSIVE
+	Only the initiator that owns the reservation can write to the
+	device.  Any initiator can read from the device.
+
+ - PR_EXCLUSIVE_ACCESS
+	Only the initiator that owns the reservation can access the
+	device.
+
+ - PR_WRITE_EXCLUSIVE_REG_ONLY
+	Only initiators with a registered key can write to the device,
+	Any initiator can read from the device.
+
+ - PR_EXCLUSIVE_ACCESS_REG_ONLY
+	Only initiators with a registered key can access the device.
+
+ - PR_WRITE_EXCLUSIVE_ALL_REGS
+
+	Only initiators with a registered key can write to the device,
+	Any initiator can read from the device.
+	All initiators with a registered key are considered reservation
+	holders.
+	Please reference the SPC spec on the meaning of a reservation
+	holder if you want to use this type.
+
+ - PR_EXCLUSIVE_ACCESS_ALL_REGS
+	Only initiators with a registered key can access the device.
+	All initiators with a registered key are considered reservation
+	holders.
+	Please reference the SPC spec on the meaning of a reservation
+	holder if you want to use this type.
+
+
+The following ioctl are supported:
+----------------------------------
+
+1. IOC_PR_REGISTER
+^^^^^^^^^^^^^^^^^^
+
+This ioctl command registers a new reservation if the new_key argument
+is non-null.  If no existing reservation exists old_key must be zero,
+if an existing reservation should be replaced old_key must contain
+the old reservation key.
+
+If the new_key argument is 0 it unregisters the existing reservation passed
+in old_key.
+
+
+2. IOC_PR_RESERVE
+^^^^^^^^^^^^^^^^^
+
+This ioctl command reserves the device and thus restricts access for other
+devices based on the type argument.  The key argument must be the existing
+reservation key for the device as acquired by the IOC_PR_REGISTER,
+IOC_PR_REGISTER_IGNORE, IOC_PR_PREEMPT or IOC_PR_PREEMPT_ABORT commands.
+
+
+3. IOC_PR_RELEASE
+^^^^^^^^^^^^^^^^^
+
+This ioctl command releases the reservation specified by key and flags
+and thus removes any access restriction implied by it.
+
+
+4. IOC_PR_PREEMPT
+^^^^^^^^^^^^^^^^^
+
+This ioctl command releases the existing reservation referred to by
+old_key and replaces it with a new reservation of type for the
+reservation key new_key.
+
+
+5. IOC_PR_PREEMPT_ABORT
+^^^^^^^^^^^^^^^^^^^^^^^
+
+This ioctl command works like IOC_PR_PREEMPT except that it also aborts
+any outstanding command sent over a connection identified by old_key.
+
+6. IOC_PR_CLEAR
+^^^^^^^^^^^^^^^
+
+This ioctl command unregisters both key and any other reservation key
+registered with the device and drops any existing reservation.
+
+
+Flags
+-----
+
+All the ioctls have a flag field.  Currently only one flag is supported:
+
+ - PR_FL_IGNORE_KEY
+	Ignore the existing reservation key.  This is commonly supported for
+	IOC_PR_REGISTER, and some implementation may support the flag for
+	IOC_PR_RESERVE.
+
+For all unknown flags the kernel will return -EOPNOTSUPP.