diff options
| author | Tim Chen <tim.c.chen@linux.intel.com> | 2026-09-21 17:37:22 -0700 |
|---|---|---|
| committer | Ingo Molnar <mingo@kernel.org> | 2026-09-22 10:49:53 +0200 |
| commit | 0d6526f82c3cdefcca47f73f5fc08dc6f335eac6 (patch) | |
| tree | 176dc2d685debcfb082c151ee94f2425ac96b364 /Documentation/block/pr.rst | |
| download | linux-stable-0d6526f82c3cdefcca47f73f5fc08dc6f335eac6.tar.gz linux-stable-0d6526f82c3cdefcca47f73f5fc08dc6f335eac6.zip | |
sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling buggrafted
alb_break_llc() decides whether to break LLC preference during active
load balance. It does so by testing that every runnable fair task on the
source rq prefers its LLC:
env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable
But the two counters cover different sets. nr_pref_llc_running is updated
in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued,
so it follows queued tasks. h_nr_runnable is updated in set_delayed()/
clear_delayed() and drops delay-dequeued tasks.
So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted
in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks,
alb_break_llc() returns false, and active balance is free to pull a task
off its preferred LLC. Active balance only moves runnable tasks, and this
is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB
skips the per-task test in can_migrate_task(). The runnable set is the one
we want.
Fix it on the counter side. A task should be counted in
nr_pref_llc_running exactly while it is both queued on its preferred LLC
(pref_llc_queued) and runnable (!sched_delayed). Define that membership
once in task_pref_llc_runnable(), and adjust the counter only through
pref_llc_running_inc()/pref_llc_running_dec() from the four sites that
change either input: account_llc_enqueue(), account_llc_dequeue(),
set_delayed() and clear_delayed(). Gating every update on the same
predicate keeps the delay, wake and dequeue paths from double-counting
or underflowing; see the comments at those sites for the ordering.
nr_llc_running and sd->llc_counts are not touched and stay on queued
semantics.
Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC")
Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/
Reported-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kayra Cizmeci <kayracizmeci@gmail.com>
Cc: <stable@kernel.org> # v7.2.x
Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com
Diffstat (limited to 'Documentation/block/pr.rst')
| -rw-r--r-- | Documentation/block/pr.rst | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/Documentation/block/pr.rst b/Documentation/block/pr.rst new file mode 100644 index 000000000..c893d6da8 --- /dev/null +++ b/Documentation/block/pr.rst @@ -0,0 +1,119 @@ +=============================================== +Block layer support for Persistent Reservations +=============================================== + +The Linux kernel supports a user space interface for simplified +Persistent Reservations which map to block devices that support +these (like SCSI). Persistent Reservations allow restricting +access to block devices to specific initiators in a shared storage +setup. + +This document gives a general overview of the support ioctl commands. +For a more detailed reference please refer to the SCSI Primary +Commands standard, specifically the section on Reservations and the +"PERSISTENT RESERVE IN" and "PERSISTENT RESERVE OUT" commands. + +All implementations are expected to ensure the reservations survive +a power loss and cover all connections in a multi path environment. +These behaviors are optional in SPC but will be automatically applied +by Linux. + + +The following types of reservations are supported: +-------------------------------------------------- + + - PR_WRITE_EXCLUSIVE + Only the initiator that owns the reservation can write to the + device. Any initiator can read from the device. + + - PR_EXCLUSIVE_ACCESS + Only the initiator that owns the reservation can access the + device. + + - PR_WRITE_EXCLUSIVE_REG_ONLY + Only initiators with a registered key can write to the device, + Any initiator can read from the device. + + - PR_EXCLUSIVE_ACCESS_REG_ONLY + Only initiators with a registered key can access the device. + + - PR_WRITE_EXCLUSIVE_ALL_REGS + + Only initiators with a registered key can write to the device, + Any initiator can read from the device. + All initiators with a registered key are considered reservation + holders. + Please reference the SPC spec on the meaning of a reservation + holder if you want to use this type. + + - PR_EXCLUSIVE_ACCESS_ALL_REGS + Only initiators with a registered key can access the device. + All initiators with a registered key are considered reservation + holders. + Please reference the SPC spec on the meaning of a reservation + holder if you want to use this type. + + +The following ioctl are supported: +---------------------------------- + +1. IOC_PR_REGISTER +^^^^^^^^^^^^^^^^^^ + +This ioctl command registers a new reservation if the new_key argument +is non-null. If no existing reservation exists old_key must be zero, +if an existing reservation should be replaced old_key must contain +the old reservation key. + +If the new_key argument is 0 it unregisters the existing reservation passed +in old_key. + + +2. IOC_PR_RESERVE +^^^^^^^^^^^^^^^^^ + +This ioctl command reserves the device and thus restricts access for other +devices based on the type argument. The key argument must be the existing +reservation key for the device as acquired by the IOC_PR_REGISTER, +IOC_PR_REGISTER_IGNORE, IOC_PR_PREEMPT or IOC_PR_PREEMPT_ABORT commands. + + +3. IOC_PR_RELEASE +^^^^^^^^^^^^^^^^^ + +This ioctl command releases the reservation specified by key and flags +and thus removes any access restriction implied by it. + + +4. IOC_PR_PREEMPT +^^^^^^^^^^^^^^^^^ + +This ioctl command releases the existing reservation referred to by +old_key and replaces it with a new reservation of type for the +reservation key new_key. + + +5. IOC_PR_PREEMPT_ABORT +^^^^^^^^^^^^^^^^^^^^^^^ + +This ioctl command works like IOC_PR_PREEMPT except that it also aborts +any outstanding command sent over a connection identified by old_key. + +6. IOC_PR_CLEAR +^^^^^^^^^^^^^^^ + +This ioctl command unregisters both key and any other reservation key +registered with the device and drops any existing reservation. + + +Flags +----- + +All the ioctls have a flag field. Currently only one flag is supported: + + - PR_FL_IGNORE_KEY + Ignore the existing reservation key. This is commonly supported for + IOC_PR_REGISTER, and some implementation may support the flag for + IOC_PR_RESERVE. + +For all unknown flags the kernel will return -EOPNOTSUPP. |
