openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

1 files changed, 151 insertions, 0 deletions

diff --git a/Documentation/block/null_blk.rst b/Documentation/block/null_blk.rst
new file mode 100644
index 000000000..4dd78f24d
--- /dev/null
+++ b/Documentation/block/null_blk.rst
@@ -0,0 +1,151 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Null block device driver
+========================
+
+Overview
+========
+
+The null block device (``/dev/nullb*``) is used for benchmarking the various
+block-layer implementations. It emulates a block device of X gigabytes in size.
+It does not execute any read/write operation, just mark them as complete in
+the request queue. The following instances are possible:
+
+  Multi-queue block-layer
+
+    - Request-based.
+    - Configurable submission queues per device.
+
+  No block-layer (Known as bio-based)
+
+    - Bio-based. IO requests are submitted directly to the device driver.
+    - Directly accepts bio data structure and returns them.
+
+All of them have a completion queue for each core in the system.
+
+Module parameters
+=================
+
+queue_mode=[0-2]: Default: 2-Multi-queue
+  Selects which block-layer the module should instantiate with.
+
+  =  ============
+  0  Bio-based
+  1  Single-queue (deprecated)
+  2  Multi-queue
+  =  ============
+
+home_node=[0--nr_nodes]: Default: NUMA_NO_NODE
+  Selects what CPU node the data structures are allocated from.
+
+gb=[Size in GB]: Default: 250GB
+  The size of the device reported to the system.
+
+bs=[Block size (in bytes)]: Default: 512 bytes
+  The block size reported to the system.
+
+nr_devices=[Number of devices]: Default: 1
+  Number of block devices instantiated. They are instantiated as /dev/nullb0,
+  etc.
+
+irqmode=[0-2]: Default: 1-Soft-irq
+  The completion mode used for completing IOs to the block-layer.
+
+  =  ===========================================================================
+  0  None.
+  1  Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
+     when IOs are issued from another CPU node than the home the device is
+     connected to.
+  2  Timer: Waits a specific period (completion_nsec) for each IO before
+     completion.
+  =  ===========================================================================
+
+completion_nsec=[ns]: Default: 10,000ns
+  Combined with irqmode=2 (timer). The time each completion event must wait.
+
+submit_queues=[1..nr_cpus]: Default: 1
+  The number of submission queues attached to the device driver. If unset, it
+  defaults to 1. For multi-queue, it is ignored when use_per_node_hctx module
+  parameter is 1.
+
+hw_queue_depth=[0..qdepth]: Default: 64
+  The hardware queue depth of the device.
+
+memory_backed=[0/1]: Default: 0
+  Whether or not to use a memory buffer to respond to IO requests
+
+  =  =============================================
+  0  Transfer no data in response to IO requests
+  1  Use a memory buffer to respond to IO requests
+  =  =============================================
+
+discard=[0/1]: Default: 0
+  Support discard operations (requires memory-backed null_blk device).
+
+  =  =====================================
+  0  Do not support discard operations
+  1  Enable support for discard operations
+  =  =====================================
+
+cache_size=[Size in MB]: Default: 0
+  Cache size in MB for memory-backed device.
+
+mbps=[Maximum bandwidth in MB/s]: Default: 0 (no limit)
+  Bandwidth limit for device performance.
+
+Multi-queue specific parameters
+-------------------------------
+
+use_per_node_hctx=[0/1]: Default: 0
+  Number of hardware context queues.
+
+  =  =====================================================================
+  0  The number of submit queues are set to the value of the submit_queues
+     parameter.
+  1  The multi-queue block layer is instantiated with a hardware dispatch
+     queue for each CPU node in the system.
+  =  =====================================================================
+
+no_sched=[0/1]: Default: 0
+  Enable/disable the io scheduler.
+
+  =  ======================================
+  0  nullb* use default blk-mq io scheduler
+  1  nullb* doesn't use io scheduler
+  =  ======================================
+
+blocking=[0/1]: Default: 0
+  Blocking behavior of the request queue.
+
+  =  ===============================================================
+  0  Register as a non-blocking blk-mq driver device.
+  1  Register as a blocking blk-mq driver device, null_blk will set
+     the BLK_MQ_F_BLOCKING flag, indicating that it sometimes/always
+     needs to block in its ->queue_rq() function.
+  =  ===============================================================
+
+shared_tags=[0/1]: Default: 0
+  Sharing tags between devices.
+
+  =  ================================================================
+  0  Tag set is not shared.
+  1  Tag set shared between devices for blk-mq. Only makes sense with
+     nr_devices > 1, otherwise there's no tag set to share.
+  =  ================================================================
+
+zoned=[0/1]: Default: 0
+  Device is a random-access or a zoned block device.
+
+  =  ======================================================================
+  0  Block device is exposed as a random-access block device.
+  1  Block device is exposed as a host-managed zoned block device. Requires
+     CONFIG_BLK_DEV_ZONED.
+  =  ======================================================================
+
+zone_size=[MB]: Default: 256
+  Per zone size when exposed as a zoned block device. Must be a power of two.
+
+zone_nr_conv=[nr_conv]: Default: 0
+  The number of conventional zones to create when block device is zoned.  If
+  zone_nr_conv >= nr_zones, it will be reduced to nr_zones - 1.