x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 59 insertions, 0 deletions

diff --git a/Documentation/block/error-injection.rst b/Documentation/block/error-injection.rst
new file mode 100644
index 000000000..81f31af82
--- /dev/null
+++ b/Documentation/block/error-injection.rst
@@ -0,0 +1,59 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Configurable Error Injection
+============================
+
+Overview
+--------
+
+Configurable error injection allows injecting specific block layer status codes
+for sector ranges of a block device.  Errors can be injected unconditionally, or
+with a given probability.
+
+To use configurable error injection, CONFIG_BLK_ERROR_INJECTION must be enabled.
+
+The only interface is the error_injection debugfs file, which is created for
+each registered gendisk.  Writes to this file are used to create or delete rules
+and reads return a list of the current error injection sites.
+
+Options
+-------
+
+The following options specify the operations:
+
+===================	=======================================================
+add			add a new rule
+removeall		remove all existing rules
+===================	=======================================================
+
+The following options specify the details of the rule for the add operation:
+
+===================	=======================================================
+op=<string>		block layer operation this rule applies to.  This uses
+			the XYZ for each REQ_OP_XYZ operation, e.g. READ, WRITE
+			or DISCARD. Mandatory.
+status=<string>		Status to return.  This uses XYZ for each BLK_STS_XYZ
+			code, e.g. IOERR or MEDIUM. Mandatory.
+start=<number>		First block layer sector the rule applies to.
+			Optional, defaults to 0.
+nr_sectors=<number>	Number of sectors this rule applies.
+			Optional, defaults to the remainder of the device.
+chance=<number>		Only return a failure with a likelihood of 1/chance.
+			Optional, defaults to 1 (always).
+===================	=======================================================
+
+Example
+-------
+
+Return BLK_STS_IOERR for one in 10 reads of sector 0 of /dev/nvme0n1:
+
+	$ echo 'add,op=READ,start=0,status=IOERR,chance=10' > /sys/kernel/debug/block/nvme0n1/error_injection
+
+Return BLK_STS_MEDIUM for every write to /dev/nvme0n1:
+
+	$ echo 'add,op=WRITE,start=0,status=MEDIUM' > /sys/kernel/debug/block/nvme0n1/error_injection
+
+Remove all rules for /dev/nvme0n1:
+
+	$ echo 'removeall' > /sys/kernel/debug/block/nvme0n1/error_injection