arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 59 insertions, 0 deletions

diff --git a/Documentation/block/error-injection.rst b/Documentation/block/error-injection.rst
new file mode 100644
index 000000000..81f31af82
--- /dev/null
+++ b/Documentation/block/error-injection.rst
@@ -0,0 +1,59 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Configurable Error Injection
+============================
+
+Overview
+--------
+
+Configurable error injection allows injecting specific block layer status codes
+for sector ranges of a block device.  Errors can be injected unconditionally, or
+with a given probability.
+
+To use configurable error injection, CONFIG_BLK_ERROR_INJECTION must be enabled.
+
+The only interface is the error_injection debugfs file, which is created for
+each registered gendisk.  Writes to this file are used to create or delete rules
+and reads return a list of the current error injection sites.
+
+Options
+-------
+
+The following options specify the operations:
+
+===================	=======================================================
+add			add a new rule
+removeall		remove all existing rules
+===================	=======================================================
+
+The following options specify the details of the rule for the add operation:
+
+===================	=======================================================
+op=<string>		block layer operation this rule applies to.  This uses
+			the XYZ for each REQ_OP_XYZ operation, e.g. READ, WRITE
+			or DISCARD. Mandatory.
+status=<string>		Status to return.  This uses XYZ for each BLK_STS_XYZ
+			code, e.g. IOERR or MEDIUM. Mandatory.
+start=<number>		First block layer sector the rule applies to.
+			Optional, defaults to 0.
+nr_sectors=<number>	Number of sectors this rule applies.
+			Optional, defaults to the remainder of the device.
+chance=<number>		Only return a failure with a likelihood of 1/chance.
+			Optional, defaults to 1 (always).
+===================	=======================================================
+
+Example
+-------
+
+Return BLK_STS_IOERR for one in 10 reads of sector 0 of /dev/nvme0n1:
+
+	$ echo 'add,op=READ,start=0,status=IOERR,chance=10' > /sys/kernel/debug/block/nvme0n1/error_injection
+
+Return BLK_STS_MEDIUM for every write to /dev/nvme0n1:
+
+	$ echo 'add,op=WRITE,start=0,status=MEDIUM' > /sys/kernel/debug/block/nvme0n1/error_injection
+
+Remove all rules for /dev/nvme0n1:
+
+	$ echo 'removeall' > /sys/kernel/debug/block/nvme0n1/error_injection