iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 51 insertions, 0 deletions

diff --git a/Documentation/arch/xtensa/atomctl.rst b/Documentation/arch/xtensa/atomctl.rst
new file mode 100644
index 000000000..75d174169
--- /dev/null
+++ b/Documentation/arch/xtensa/atomctl.rst
@@ -0,0 +1,51 @@
+===========================================
+Atomic Operation Control (ATOMCTL) Register
+===========================================
+
+We Have Atomic Operation Control (ATOMCTL) Register.
+This register determines the effect of using a S32C1I instruction
+with various combinations of:
+
+     1. With and without an Coherent Cache Controller which
+        can do Atomic Transactions to the memory internally.
+
+     2. With and without An Intelligent Memory Controller which
+        can do Atomic Transactions itself.
+
+The Core comes up with a default value of for the three types of cache ops::
+
+      0x28: (WB: Internal, WT: Internal, BY:Exception)
+
+On the FPGA Cards we typically simulate an Intelligent Memory controller
+which can implement  RCW transactions. For FPGA cards with an External
+Memory controller we let it to the atomic operations internally while
+doing a Cached (WB) transaction and use the Memory RCW for un-cached
+operations.
+
+For systems without an coherent cache controller, non-MX, we always
+use the memory controllers RCW, though non-MX controllers likely
+support the Internal Operation.
+
+CUSTOMER-WARNING:
+   Virtually all customers buy their memory controllers from vendors that
+   don't support atomic RCW memory transactions and will likely want to
+   configure this register to not use RCW.
+
+Developers might find using RCW in Bypass mode convenient when testing
+with the cache being bypassed; for example studying cache alias problems.
+
+See Section 4.3.12.4 of ISA; Bits::
+
+                             WB     WT      BY
+                           5   4 | 3   2 | 1   0
+
+=========    ==================      ==================      ===============
+  2 Bit
+  Field
+  Values     WB - Write Back         WT - Write Thru         BY - Bypass
+=========    ==================      ==================      ===============
+    0        Exception               Exception               Exception
+    1        RCW Transaction         RCW Transaction         RCW Transaction
+    2        Internal Operation      Internal Operation      Reserved
+    3        Reserved                Reserved                Reserved
+=========    ==================      ==================      ===============