KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

4 files changed, 116 insertions, 0 deletions

diff --git a/Documentation/arch/mips/booting.rst b/Documentation/arch/mips/booting.rst
new file mode 100644
index 000000000..7c18a4eab
--- /dev/null
+++ b/Documentation/arch/mips/booting.rst
@@ -0,0 +1,28 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+BMIPS DeviceTree Booting
+------------------------
+
+  Some bootloaders only support a single entry point, at the start of the
+  kernel image.  Other bootloaders will jump to the ELF start address.
+  Both schemes are supported; CONFIG_BOOT_RAW=y and CONFIG_NO_EXCEPT_FILL=y,
+  so the first instruction immediately jumps to kernel_entry().
+
+  Similar to the arch/arm case (b), a DT-aware bootloader is expected to
+  set up the following registers:
+
+         a0 : 0
+
+         a1 : 0xffffffff
+
+         a2 : Physical pointer to the device tree block (defined in chapter
+         II) in RAM.  The device tree can be located anywhere in the first
+         512MB of the physical address space (0x00000000 - 0x1fffffff),
+         aligned on a 64 bit boundary.
+
+  Legacy bootloaders do not use this convention, and they do not pass in a
+  DT block.  In this case, Linux will look for a builtin DTB, selected via
+  CONFIG_DT_*.
+
+  This convention is defined for 32-bit systems only, as there are not
+  currently any 64-bit BMIPS implementations.
diff --git a/Documentation/arch/mips/features.rst b/Documentation/arch/mips/features.rst
new file mode 100644
index 000000000..6e0ffe3e7
--- /dev/null
+++ b/Documentation/arch/mips/features.rst
@@ -0,0 +1,3 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. kernel-feat:: features mips
diff --git a/Documentation/arch/mips/index.rst b/Documentation/arch/mips/index.rst
new file mode 100644
index 000000000..703e195b9
--- /dev/null
+++ b/Documentation/arch/mips/index.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+MIPS-specific Documentation
+===========================
+
+.. toctree::
+   :maxdepth: 2
+   :numbered:
+
+   booting
+   ingenic-tcu
+
+   features
diff --git a/Documentation/arch/mips/ingenic-tcu.rst b/Documentation/arch/mips/ingenic-tcu.rst
new file mode 100644
index 000000000..2ce4cb131
--- /dev/null
+++ b/Documentation/arch/mips/ingenic-tcu.rst
@@ -0,0 +1,71 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+Ingenic JZ47xx SoCs Timer/Counter Unit hardware
+===============================================
+
+The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
+hardware block. It features up to eight channels, that can be used as
+counters, timers, or PWM.
+
+- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all
+  have eight channels.
+
+- JZ4725B introduced a separate channel, called Operating System Timer
+  (OST). It is a 32-bit programmable timer. On JZ4760B and above, it is
+  64-bit.
+
+- Each one of the TCU channels has its own clock, which can be reparented to three
+  different clocks (pclk, ext, rtc), gated, and reclocked, through their TCSR register.
+
+    - The watchdog and OST hardware blocks also feature a TCSR register with the same
+      format in their register space.
+    - The TCU registers used to gate/ungate can also gate/ungate the watchdog and
+      OST clocks.
+
+- Each TCU channel works in one of two modes:
+
+    - mode TCU1: channels cannot work in sleep mode, but are easier to
+      operate.
+    - mode TCU2: channels can work in sleep mode, but the operation is a bit
+      more complicated than with TCU1 channels.
+
+- The mode of each TCU channel depends on the SoC used:
+
+    - On the oldest SoCs (up to JZ4740), all of the eight channels operate in
+      TCU1 mode.
+    - On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1.
+    - On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the
+      others operate as TCU1.
+
+- Each channel can generate an interrupt. Some channels share an interrupt
+  line, some don't, and this changes between SoC versions:
+
+    - on older SoCs (JZ4740 and below), channel 0 and channel 1 have their
+      own interrupt line; channels 2-7 share the last interrupt line.
+    - On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one
+      interrupt line; the OST uses the last interrupt line.
+    - on newer SoCs (JZ4750 and above), channel 5 has its own interrupt;
+      channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
+      the OST uses the last interrupt line.
+
+Implementation
+==============
+
+The functionalities of the TCU hardware are spread across multiple drivers:
+
+===========  =====
+clocks       drivers/clk/ingenic/tcu.c
+interrupts   drivers/irqchip/irq-ingenic-tcu.c
+timers       drivers/clocksource/ingenic-timer.c
+OST          drivers/clocksource/ingenic-ost.c
+PWM          drivers/pwm/pwm-jz4740.c
+watchdog     drivers/watchdog/jz4740_wdt.c
+===========  =====
+
+Because various functionalities of the TCU that belong to different drivers
+and frameworks can be controlled from the same registers, all of these
+drivers access their registers through the same regmap.
+
+For more information regarding the devicetree bindings of the TCU drivers,
+have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.yaml.