Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 83 insertions, 0 deletions

diff --git a/Documentation/admin-guide/sysctl/crypto.rst b/Documentation/admin-guide/sysctl/crypto.rst
new file mode 100644
index 000000000..9a1bd5328
--- /dev/null
+++ b/Documentation/admin-guide/sysctl/crypto.rst
@@ -0,0 +1,83 @@
+=================
+/proc/sys/crypto/
+=================
+
+These files show up in ``/proc/sys/crypto/``, depending on the
+kernel configuration:
+
+.. contents:: :local:
+
+.. _af_alg_restrict:
+
+af_alg_restrict
+===============
+
+Controls the level of restriction of AF_ALG.
+
+AF_ALG is a deprecated and rarely-used userspace interface that is a
+frequent source of vulnerabilities. It also unnecessarily exposes a
+large number of kernel implementation details. For more information
+about AF_ALG, see :ref:`Documentation/crypto/userspace-if.rst
+<crypto_userspace_interface>`.
+
+Starting in Linux v7.3, AF_ALG supports only a limited set of
+algorithms by default. This sysctl allows the system administrator to
+remove this restriction when needed for compatibility reasons, or to
+go further and disable AF_ALG entirely. The default value is 1.
+
+===  ==================================================================
+0    AF_ALG is unrestricted.
+
+1    AF_ALG is supported with a limited list of algorithms. The list
+     is designed for compatibility with known users such as iwd and
+     bluez that haven't yet been fixed to use userspace crypto code.
+
+     Specifically, there is an allowlist for unprivileged processes
+     and a somewhat longer allowlist for processes that hold
+     CAP_SYS_ADMIN or CAP_NET_ADMIN in the initial user namespace.
+
+     Attempts to bind() an AF_ALG socket with a disallowed algorithm
+     fail with ENOENT.
+
+2    AF_ALG is completely disabled. Attempts to create an AF_ALG
+     socket fail with EAFNOSUPPORT.
+===  ==================================================================
+
+fips_enabled
+============
+
+Read-only flag that indicates whether FIPS mode is enabled.
+
+- ``0``: FIPS mode is disabled (default).
+- ``1``: FIPS mode is enabled.
+
+This value is set at boot time via the ``fips=1`` kernel command line
+parameter. When enabled, the cryptographic API will restrict the use
+of certain algorithms and perform self-tests to ensure compliance with
+FIPS (Federal Information Processing Standards) requirements, such as
+FIPS 140-2 and the newer FIPS 140-3, depending on the kernel
+configuration and the module in use.
+
+fips_name
+=========
+
+Read-only file that contains the name of the FIPS module currently in use.
+The value is typically configured via the ``CONFIG_CRYPTO_FIPS_NAME``
+kernel configuration option.
+
+fips_version
+============
+
+Read-only file that contains the version string of the FIPS module.
+If ``CONFIG_CRYPTO_FIPS_CUSTOM_VERSION`` is set, it uses the value from
+``CONFIG_CRYPTO_FIPS_VERSION``. Otherwise, it defaults to the kernel
+release version (``UTS_RELEASE``).
+
+Copyright (c) 2026, Shubham Chakraborty <chakrabortyshubham66@gmail.com>
+
+For general info and legal blurb, please look in
+Documentation/admin-guide/sysctl/index.rst.
+
+.. See scripts/check-sysctl-docs to keep this up to date:
+.. scripts/check-sysctl-docs -vtable="crypto" \
+..         $(git grep -l register_sysctl_)