x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 61 insertions, 0 deletions

diff --git a/Documentation/admin-guide/perf/arm-ccn.rst b/Documentation/admin-guide/perf/arm-ccn.rst
new file mode 100644
index 000000000..f62f7fe50
--- /dev/null
+++ b/Documentation/admin-guide/perf/arm-ccn.rst
@@ -0,0 +1,61 @@
+==========================
+ARM Cache Coherent Network
+==========================
+
+CCN-504 is a ring-bus interconnect consisting of 11 crosspoints
+(XPs), with each crosspoint supporting up to two device ports,
+so nodes (devices) 0 and 1 are connected to crosspoint 0,
+nodes 2 and 3 to crosspoint 1 etc.
+
+PMU (perf) driver
+-----------------
+
+The CCN driver registers a perf PMU driver, which provides
+description of available events and configuration options
+in sysfs, see /sys/bus/event_source/devices/ccn*.
+
+The "format" directory describes format of the config, config1
+and config2 fields of the perf_event_attr structure. The "events"
+directory provides configuration templates for all documented
+events, that can be used with perf tool. For example "xp_valid_flit"
+is an equivalent of "type=0x8,event=0x4". Other parameters must be
+explicitly specified.
+
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
+
+Masks are defined separately from the event description
+(due to limited number of the config values) in the "cmp_mask"
+directory, with first 8 configurable by user and additional
+4 hardcoded for the most frequent use cases.
+
+Cycle counter is described by a "type" value 0xff and does
+not require any other settings.
+
+The driver also provides a "cpumask" sysfs attribute, which contains
+a single CPU ID, of the processor which will be used to handle all
+the CCN PMU events. It is recommended that the user space tools
+request the events on this processor (if not, the perf_event->cpu value
+will be overwritten anyway). In case of this processor being offlined,
+the events are migrated to another one and the attribute is updated.
+
+Example of perf tool use::
+
+  / # perf list | grep ccn
+    ccn/cycles/                                        [Kernel PMU event]
+  <...>
+    ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
+  <...>
+
+  / # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+                                                                         sleep 1
+
+The driver does not support sampling, therefore "perf record" will
+not work. Per-task (without "-a") perf sessions are not supported.