Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 55 insertions, 0 deletions

diff --git a/Documentation/admin-guide/numastat.rst b/Documentation/admin-guide/numastat.rst
new file mode 100644
index 000000000..08ec2c2bd
--- /dev/null
+++ b/Documentation/admin-guide/numastat.rst
@@ -0,0 +1,55 @@
+===============================
+Numa policy hit/miss statistics
+===============================
+
+/sys/devices/system/node/node*/numastat
+
+All units are pages. Hugepages have separate counters.
+
+The numa_hit, numa_miss and numa_foreign counters reflect how well processes
+are able to allocate memory from nodes they prefer. If they succeed, numa_hit
+is incremented on the preferred node, otherwise numa_foreign is incremented on
+the preferred node and numa_miss on the node where allocation succeeded.
+
+Usually preferred node is the one local to the CPU where the process executes,
+but restrictions such as mempolicies can change that, so there are also two
+counters based on CPU local node. local_node is similar to numa_hit and is
+incremented on allocation from a node by CPU on the same node. other_node is
+similar to numa_miss and is incremented on the node where allocation succeeds
+from a CPU from a different node. Note there is no counter analogical to
+numa_foreign.
+
+In more detail:
+
+=============== ============================================================
+numa_hit	A process wanted to allocate memory from this node,
+		and succeeded.
+
+numa_miss	A process wanted to allocate memory from another node,
+		but ended up with memory from this node.
+
+numa_foreign	A process wanted to allocate on this node,
+		but ended up with memory from another node.
+
+local_node	A process ran on this node's CPU,
+		and got memory from this node.
+
+other_node	A process ran on a different node's CPU
+		and got memory from this node.
+
+interleave_hit 	Interleaving wanted to allocate from this node
+		and succeeded.
+=============== ============================================================
+
+For easier reading you can use the numastat utility from the numactl package
+(http://oss.sgi.com/projects/libnuma/). Note that it only works
+well right now on machines with a small number of CPUs.
+
+Note that on systems with memoryless nodes (where a node has CPUs but no
+memory) the numa_hit, numa_miss and numa_foreign statistics can be skewed
+heavily. In the current kernel implementation, if a process prefers a
+memoryless node (i.e.  because it is running on one of its local CPU), the
+implementation actually treats one of the nearest nodes with memory as the
+preferred node. As a result, such allocation will not increase the numa_foreign
+counter on the memoryless node, and will skew the numa_hit, numa_miss and
+numa_foreign statistics of the nearest node.