Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

3 files changed, 72 insertions, 0 deletions

diff --git a/Documentation/admin-guide/namespaces/compatibility-list.rst b/Documentation/admin-guide/namespaces/compatibility-list.rst
new file mode 100644
index 000000000..318800b2a
--- /dev/null
+++ b/Documentation/admin-guide/namespaces/compatibility-list.rst
@@ -0,0 +1,43 @@
+=============================
+Namespaces compatibility list
+=============================
+
+This document contains the information about the problems user
+may have when creating tasks living in different namespaces.
+
+Here's the summary. This matrix shows the known problems, that
+occur when tasks share some namespace (the columns) while living
+in different other namespaces (the rows):
+
+====	===	===	===	===	====	===
+-	UTS	IPC	VFS	PID	User	Net
+====	===	===	===	===	====	===
+UTS	 X
+IPC		 X	 1
+VFS			 X
+PID		 1	 1	 X
+User		 2	 2		 X
+Net						 X
+====	===	===	===	===	====	===
+
+1. Both the IPC and the PID namespaces provide IDs to address
+   object inside the kernel. E.g. semaphore with IPCID or
+   process group with pid.
+
+   In both cases, tasks shouldn't try exposing this ID to some
+   other task living in a different namespace via a shared filesystem
+   or IPC shmem/message. The fact is that this ID is only valid
+   within the namespace it was obtained in and may refer to some
+   other object in another namespace.
+
+2. Intentionally, two equal user IDs in different user namespaces
+   should not be equal from the VFS point of view. In other
+   words, user 10 in one user namespace shouldn't have the same
+   access permissions to files, belonging to user 10 in another
+   namespace.
+
+   The same is true for the IPC namespaces being shared - two users
+   from different user namespaces should not access the same IPC objects
+   even having equal UIDs.
+
+   But currently this is not so.
diff --git a/Documentation/admin-guide/namespaces/index.rst b/Documentation/admin-guide/namespaces/index.rst
new file mode 100644
index 000000000..384f2e0f3
--- /dev/null
+++ b/Documentation/admin-guide/namespaces/index.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Namespaces
+==========
+
+.. toctree::
+   :maxdepth: 1
+
+   compatibility-list
+   resource-control
diff --git a/Documentation/admin-guide/namespaces/resource-control.rst b/Documentation/admin-guide/namespaces/resource-control.rst
new file mode 100644
index 000000000..553a44803
--- /dev/null
+++ b/Documentation/admin-guide/namespaces/resource-control.rst
@@ -0,0 +1,18 @@
+====================================
+User namespaces and resource control
+====================================
+
+The kernel contains many kinds of objects that either don't have
+individual limits or that have limits which are ineffective when
+a set of processes is allowed to switch their UID. On a system
+where the admins don't trust their users or their users' programs,
+user namespaces expose the system to potential misuse of resources.
+
+In order to mitigate this, we recommend that admins enable memory
+control groups on any system that enables user namespaces.
+Furthermore, we recommend that admins configure the memory control
+groups to limit the maximum memory usable by any untrusted user.
+
+Memory control groups can be configured by installing the libcgroup
+package present on most distros editing /etc/cgrules.conf,
+/etc/cgconfig.conf and setting up libpam-cgroup.