Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 70 insertions, 0 deletions

diff --git a/Documentation/admin-guide/mono.rst b/Documentation/admin-guide/mono.rst
new file mode 100644
index 000000000..c6dab5680
--- /dev/null
+++ b/Documentation/admin-guide/mono.rst
@@ -0,0 +1,70 @@
+Mono(tm) Binary Kernel Support for Linux
+-----------------------------------------
+
+To configure Linux to automatically execute Mono-based .NET binaries
+(in the form of .exe files) without the need to use the mono CLR
+wrapper, you can use the BINFMT_MISC kernel support.
+
+This will allow you to execute Mono-based .NET binaries just like any
+other program after you have done the following:
+
+1) You MUST FIRST install the Mono CLR support, either by downloading
+   a binary package, a source tarball or by installing from Git. Binary
+   packages for several distributions can be found at:
+
+	https://www.mono-project.com/download/
+
+   Instructions for compiling Mono can be found at:
+
+	https://www.mono-project.com/docs/compiling-mono/linux/
+
+   Once the Mono CLR support has been installed, just check that
+   ``/usr/bin/mono`` (which could be located elsewhere, for example
+   ``/usr/local/bin/mono``) is working.
+
+2) You have to compile BINFMT_MISC either as a module or into
+   the kernel (``CONFIG_BINFMT_MISC``) and set it up properly.
+   If you choose to compile it as a module, you will have
+   to insert it manually with modprobe/insmod, as kmod
+   cannot be easily supported with binfmt_misc.
+   Read the file ``binfmt_misc.txt`` in this directory to know
+   more about the configuration process.
+
+3) Add the following entries to ``/etc/rc.local`` or similar script
+   to be run at system startup:
+
+   .. code-block:: sh
+
+    # Insert BINFMT_MISC module into the kernel
+    if [ ! -e /proc/sys/fs/binfmt_misc/register ]; then
+        /sbin/modprobe binfmt_misc
+	# Some distributions, like Fedora Core, perform
+	# the following command automatically when the
+	# binfmt_misc module is loaded into the kernel
+	# or during normal boot up (systemd-based systems).
+	# Thus, it is possible that the following line
+	# is not needed at all.
+	mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
+    fi
+
+    # Register support for .NET CLR binaries
+    if [ -e /proc/sys/fs/binfmt_misc/register ]; then
+	# Replace /usr/bin/mono with the correct pathname to
+	# the Mono CLR runtime (usually /usr/local/bin/mono
+	# when compiling from sources or CVS).
+        echo ':CLR:M::MZ::/usr/bin/mono:' > /proc/sys/fs/binfmt_misc/register
+    else
+        echo "No binfmt_misc support"
+        exit 1
+    fi
+
+4) Check that ``.exe`` binaries can be ran without the need of a
+   wrapper script, simply by launching the ``.exe`` file directly
+   from a command prompt, for example::
+
+	/usr/bin/xsd.exe
+
+   .. note::
+
+      If this fails with a permission denied error, check
+      that the ``.exe`` file has execute permissions.