Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 110 insertions, 0 deletions

diff --git a/Documentation/admin-guide/media/vimc.rst b/Documentation/admin-guide/media/vimc.rst
new file mode 100644
index 000000000..29d843a8d
--- /dev/null
+++ b/Documentation/admin-guide/media/vimc.rst
@@ -0,0 +1,110 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Media Controller Driver (vimc)
+==========================================
+
+The vimc driver emulates complex video hardware using the V4L2 API and the Media
+API. It has a capture device and three subdevices: sensor, debayer and scaler.
+
+Topology
+--------
+
+The topology is hardcoded, although you could modify it in vimc-core and
+recompile the driver to achieve your own topology. This is the default topology:
+
+.. _vimc_topology_graph:
+
+.. kernel-figure:: vimc.dot
+    :alt:   Diagram of the default media pipeline topology
+    :align: center
+
+    Media pipeline graph on vimc
+
+Configuring the topology
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Each subdevice will come with its default configuration (pixelformat, height,
+width, ...). One needs to configure the topology in order to match the
+configuration on each linked subdevice to stream frames through the pipeline.
+If the configuration doesn't match, the stream will fail. The ``v4l-utils``
+package is a bundle of user-space applications, that comes with ``media-ctl`` and
+``v4l2-ctl`` that can be used to configure the vimc configuration. This sequence
+of commands fits for the default topology:
+
+.. code-block:: bash
+
+        media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
+        media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
+        media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
+        v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
+        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
+
+Subdevices
+----------
+
+Subdevices define the behavior of an entity in the topology. Depending on the
+subdevice, the entity can have multiple pads of type source or sink.
+
+vimc-sensor:
+	Generates images in several formats using video test pattern generator.
+	Exposes:
+
+	* 1 Pad source
+
+vimc-lens:
+	Ancillary lens for a sensor. Supports auto focus control. Linked to
+	a vimc-sensor using an ancillary link. The lens supports FOCUS_ABSOLUTE
+	control.
+
+.. code-block:: bash
+
+	media-ctl -p
+	...
+	- entity 28: Lens A (0 pad, 0 link)
+			type V4L2 subdev subtype Lens flags 0
+			device node name /dev/v4l-subdev6
+	- entity 29: Lens B (0 pad, 0 link)
+			type V4L2 subdev subtype Lens flags 0
+			device node name /dev/v4l-subdev7
+	v4l2-ctl -d /dev/v4l-subdev7 -C focus_absolute
+	focus_absolute: 0
+
+
+vimc-debayer:
+	Transforms images in bayer format into a non-bayer format.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-scaler:
+	Re-size the image to meet the source pad resolution. E.g.: if the sync
+	pad is configured to 360x480 and the source to 1280x720, the image will
+	be stretched to fit the source resolution. Works for any resolution
+	within the vimc limitations (even shrinking the image if necessary).
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-capture:
+	Exposes node /dev/videoX to allow userspace to capture the stream.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+Module options
+--------------
+
+Vimc has a module parameter to configure the driver.
+
+* ``allocator=<unsigned int>``
+
+	memory allocator selection, default is 0. It specifies the way buffers
+	will be allocated.
+
+		- 0: vmalloc
+		- 1: dma-contig