Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 121 insertions, 0 deletions

diff --git a/Documentation/admin-guide/ldm.rst b/Documentation/admin-guide/ldm.rst
new file mode 100644
index 000000000..12c571368
--- /dev/null
+++ b/Documentation/admin-guide/ldm.rst
@@ -0,0 +1,121 @@
+==========================================
+LDM - Logical Disk Manager (Dynamic Disks)
+==========================================
+
+:Author: Originally Written by FlatCap - Richard Russon <ldm@flatcap.org>.
+:Last Updated: Anton Altaparmakov on 30 March 2007 for Windows Vista.
+
+Overview
+--------
+
+Windows 2000, XP, and Vista use a new partitioning scheme.  It is a complete
+replacement for the MSDOS style partitions.  It stores its information in a
+1MiB journalled database at the end of the physical disk.  The size of
+partitions is limited only by disk space.  The maximum number of partitions is
+nearly 2000.
+
+Any partitions created under the LDM are called "Dynamic Disks".  There are no
+longer any primary or extended partitions.  Normal MSDOS style partitions are
+now known as Basic Disks.
+
+If you wish to use Spanned, Striped, Mirrored or RAID 5 Volumes, you must use
+Dynamic Disks.  The journalling allows Windows to make changes to these
+partitions and filesystems without the need to reboot.
+
+Once the LDM driver has divided up the disk, you can use the MD driver to
+assemble any multi-partition volumes, e.g.  Stripes, RAID5.
+
+To prevent legacy applications from repartitioning the disk, the LDM creates a
+dummy MSDOS partition containing one disk-sized partition.  This is what is
+supported with the Linux LDM driver.
+
+A newer approach that has been implemented with Vista is to put LDM on top of a
+GPT label disk.  This is not supported by the Linux LDM driver yet.
+
+
+Example
+-------
+
+Below we have a 50MiB disk, divided into seven partitions.
+
+.. note::
+
+   The missing 1MiB at the end of the disk is where the LDM database is
+   stored.
+
++-------++--------------+---------+-----++--------------+---------+----+
+|Device || Offset Bytes | Sectors | MiB || Size   Bytes | Sectors | MiB|
++=======++==============+=========+=====++==============+=========+====+
+|hda    ||            0 |       0 |   0 ||     52428800 |  102400 |  50|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda1   ||     51380224 |  100352 |  49 ||      1048576 |    2048 |   1|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda2   ||        16384 |      32 |   0 ||      6979584 |   13632 |   6|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda3   ||      6995968 |   13664 |   6 ||     10485760 |   20480 |  10|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda4   ||     17481728 |   34144 |  16 ||      4194304 |    8192 |   4|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda5   ||     21676032 |   42336 |  20 ||      5242880 |   10240 |   5|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda6   ||     26918912 |   52576 |  25 ||     10485760 |   20480 |  10|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda7   ||     37404672 |   73056 |  35 ||     13959168 |   27264 |  13|
++-------++--------------+---------+-----++--------------+---------+----+
+
+The LDM Database may not store the partitions in the order that they appear on
+disk, but the driver will sort them.
+
+When Linux boots, you will see something like::
+
+  hda: 102400 sectors w/32KiB Cache, CHS=50/64/32
+  hda: [LDM] hda1 hda2 hda3 hda4 hda5 hda6 hda7
+
+
+Compiling LDM Support
+---------------------
+
+To enable LDM, choose the following two options: 
+
+  - "Advanced partition selection" CONFIG_PARTITION_ADVANCED
+  - "Windows Logical Disk Manager (Dynamic Disk) support" CONFIG_LDM_PARTITION
+
+If you believe the driver isn't working as it should, you can enable the extra
+debugging code.  This will produce a LOT of output.  The option is:
+
+  - "Windows LDM extra logging" CONFIG_LDM_DEBUG
+
+N.B. The partition code cannot be compiled as a module.
+
+As with all the partition code, if the driver doesn't see signs of its type of
+partition, it will pass control to another driver, so there is no harm in
+enabling it.
+
+If you have Dynamic Disks but don't enable the driver, then all you will see
+is a dummy MSDOS partition filling the whole disk.  You won't be able to mount
+any of the volumes on the disk.
+
+
+Booting
+-------
+
+If you enable LDM support, then lilo is capable of booting from any of the
+discovered partitions.  However, grub does not understand the LDM partitioning
+and cannot boot from a Dynamic Disk.
+
+
+More Documentation
+------------------
+
+There is an Overview of the LDM together with complete Technical Documentation.
+It is available for download.
+
+  http://www.linux-ntfs.org/
+
+If you have any LDM questions that aren't answered in the documentation, email
+me.
+
+Cheers,
+    FlatCap - Richard Russon
+    ldm@flatcap.org
+