Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 66 insertions, 0 deletions

diff --git a/Documentation/admin-guide/jfs.rst b/Documentation/admin-guide/jfs.rst
new file mode 100644
index 000000000..9e12d936b
--- /dev/null
+++ b/Documentation/admin-guide/jfs.rst
@@ -0,0 +1,66 @@
+===========================================
+IBM's Journaled File System (JFS) for Linux
+===========================================
+
+JFS Homepage:  http://jfs.sourceforge.net/
+
+The following mount options are supported:
+
+(*) == default
+
+iocharset=name
+                Character set to use for converting from Unicode to
+		ASCII.  The default is to do no conversion.  Use
+		iocharset=utf8 for UTF-8 translations.  This requires
+		CONFIG_NLS_UTF8 to be set in the kernel .config file.
+		iocharset=none specifies the default behavior explicitly.
+
+resize=value
+                Resize the volume to <value> blocks.  JFS only supports
+		growing a volume, not shrinking it.  This option is only
+		valid during a remount, when the volume is mounted
+		read-write.  The resize keyword with no value will grow
+		the volume to the full size of the partition.
+
+nointegrity
+                Do not write to the journal.  The primary use of this option
+		is to allow for higher performance when restoring a volume
+		from backup media.  The integrity of the volume is not
+		guaranteed if the system abnormally abends.
+
+integrity(*)
+                Commit metadata changes to the journal.  Use this option to
+		remount a volume where the nointegrity option was
+		previously specified in order to restore normal behavior.
+
+errors=continue
+                        Keep going on a filesystem error.
+errors=remount-ro(*)
+                        Remount the filesystem read-only on an error.
+errors=panic
+                        Panic and halt the machine if an error occurs.
+
+uid=value
+                Override on-disk uid with specified value
+gid=value
+                Override on-disk gid with specified value
+umask=value
+                Override on-disk umask with specified octal value. For
+                directories, the execute bit will be set if the corresponding
+		read bit is set.
+
+discard=minlen, discard/nodiscard(*)
+                This enables/disables the use of discard/TRIM commands.
+		The discard/TRIM commands are sent to the underlying
+                block device when blocks are freed. This is useful for SSD
+                devices and sparse/thinly-provisioned LUNs.  The FITRIM ioctl
+		command is also available together with the nodiscard option.
+		The value of minlen specifies the minimum blockcount, when
+		a TRIM command to the block device is considered useful.
+		When no value is given to the discard option, it defaults to
+		64 blocks, which means 256KiB in JFS.
+		The minlen value of discard overrides the minlen value given
+		on an FITRIM ioctl().
+
+The JFS mailing list can be subscribed to by using the link labeled
+"Mail list Subscribe" at our web page http://jfs.sourceforge.net/