x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 66 insertions, 0 deletions

diff --git a/Documentation/admin-guide/jfs.rst b/Documentation/admin-guide/jfs.rst
new file mode 100644
index 000000000..9e12d936b
--- /dev/null
+++ b/Documentation/admin-guide/jfs.rst
@@ -0,0 +1,66 @@
+===========================================
+IBM's Journaled File System (JFS) for Linux
+===========================================
+
+JFS Homepage:  http://jfs.sourceforge.net/
+
+The following mount options are supported:
+
+(*) == default
+
+iocharset=name
+                Character set to use for converting from Unicode to
+		ASCII.  The default is to do no conversion.  Use
+		iocharset=utf8 for UTF-8 translations.  This requires
+		CONFIG_NLS_UTF8 to be set in the kernel .config file.
+		iocharset=none specifies the default behavior explicitly.
+
+resize=value
+                Resize the volume to <value> blocks.  JFS only supports
+		growing a volume, not shrinking it.  This option is only
+		valid during a remount, when the volume is mounted
+		read-write.  The resize keyword with no value will grow
+		the volume to the full size of the partition.
+
+nointegrity
+                Do not write to the journal.  The primary use of this option
+		is to allow for higher performance when restoring a volume
+		from backup media.  The integrity of the volume is not
+		guaranteed if the system abnormally abends.
+
+integrity(*)
+                Commit metadata changes to the journal.  Use this option to
+		remount a volume where the nointegrity option was
+		previously specified in order to restore normal behavior.
+
+errors=continue
+                        Keep going on a filesystem error.
+errors=remount-ro(*)
+                        Remount the filesystem read-only on an error.
+errors=panic
+                        Panic and halt the machine if an error occurs.
+
+uid=value
+                Override on-disk uid with specified value
+gid=value
+                Override on-disk gid with specified value
+umask=value
+                Override on-disk umask with specified octal value. For
+                directories, the execute bit will be set if the corresponding
+		read bit is set.
+
+discard=minlen, discard/nodiscard(*)
+                This enables/disables the use of discard/TRIM commands.
+		The discard/TRIM commands are sent to the underlying
+                block device when blocks are freed. This is useful for SSD
+                devices and sparse/thinly-provisioned LUNs.  The FITRIM ioctl
+		command is also available together with the nodiscard option.
+		The value of minlen specifies the minimum blockcount, when
+		a TRIM command to the block device is considered useful.
+		When no value is given to the discard option, it defaults to
+		64 blocks, which means 256KiB in JFS.
+		The minlen value of discard overrides the minlen value given
+		on an FITRIM ioctl().
+
+The JFS mailing list can be subscribed to by using the link labeled
+"Mail list Subscribe" at our web page http://jfs.sourceforge.net/