Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 63 insertions, 0 deletions

diff --git a/Documentation/admin-guide/device-mapper/linear.rst b/Documentation/admin-guide/device-mapper/linear.rst
new file mode 100644
index 000000000..9d17fc6e6
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/linear.rst
@@ -0,0 +1,63 @@
+=========
+dm-linear
+=========
+
+Device-Mapper's "linear" target maps a linear range of the Device-Mapper
+device onto a linear range of another device.  This is the basic building
+block of logical volume managers.
+
+Parameters: <dev path> <offset>
+    <dev path>:
+	Full pathname to the underlying block-device, or a
+        "major:minor" device-number.
+    <offset>:
+	Starting sector within the device.
+
+
+Example scripts
+===============
+
+::
+
+  #!/bin/sh
+  # Create an identity mapping for a device
+  echo "0 `blockdev --getsz $1` linear $1 0" | dmsetup create identity
+
+::
+
+  #!/bin/sh
+  # Join 2 devices together
+  size1=`blockdev --getsz $1`
+  size2=`blockdev --getsz $2`
+  echo "0 $size1 linear $1 0
+  $size1 $size2 linear $2 0" | dmsetup create joined
+
+::
+
+  #!/usr/bin/perl -w
+  # Split a device into 4M chunks and then join them together in reverse order.
+
+  my $name = "reverse";
+  my $extent_size = 4 * 1024 * 2;
+  my $dev = $ARGV[0];
+  my $table = "";
+  my $count = 0;
+
+  if (!defined($dev)) {
+          die("Please specify a device.\n");
+  }
+
+  my $dev_size = `blockdev --getsz $dev`;
+  my $extents = int($dev_size / $extent_size) -
+                (($dev_size % $extent_size) ? 1 : 0);
+
+  while ($extents > 0) {
+          my $this_start = $count * $extent_size;
+          $extents--;
+          $count++;
+          my $this_offset = $extents * $extent_size;
+
+          $table .= "$this_start $extent_size linear $dev $this_offset\n";
+  }
+
+  `echo \"$table\" | dmsetup create $name`;