Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 129 insertions, 0 deletions

diff --git a/Documentation/admin-guide/device-mapper/dm-inlinecrypt.rst b/Documentation/admin-guide/device-mapper/dm-inlinecrypt.rst
new file mode 100644
index 000000000..8258a72f0
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-inlinecrypt.rst
@@ -0,0 +1,129 @@
+==============
+dm-inlinecrypt
+==============
+
+Device-Mapper's "inlinecrypt" target provides transparent encryption of block devices
+using the inline encryption hardware.
+
+For a more detailed description of inline encryption, see:
+https://docs.kernel.org/block/inline-encryption.html
+
+Parameters::
+
+	      <cipher> <key> <iv_offset> <device path> \
+	      <offset> [<#opt_params> <opt_params>]
+
+<cipher>
+    Encryption cipher type.
+
+    The cipher specifications format is::
+
+       cipher
+
+    Examples::
+
+       aes-xts-plain64
+
+    The cipher type corresponds to the encryption modes supported by
+    inline crypto in the block layer. Currently, only
+    BLK_ENCRYPTION_MODE_AES_256_XTS (i.e. aes-xts-plain64) is supported.
+
+<key>
+    Key used for encryption. It is encoded either as a hexadecimal number
+    or it can be passed as <key_string> prefixed with single colon
+    character (':') for keys residing in kernel keyring service.
+    You can only use key sizes that are valid for the selected cipher.
+    Note that the size in bytes of a valid key must be in below range.
+
+        [BLK_CRYPTO_KEY_TYPE_RAW, BLK_CRYPTO_KEY_TYPE_HW_WRAPPED]
+
+<key_string>
+    The kernel keyring key is identified by string in following format:
+    <key_size>:<keyring_type>:<key_description>.
+
+<key_size>
+    The encryption key size in bytes. The kernel key payload size must match
+    the value passed in <key_size>.
+
+<keyring_type>
+    The type of the key inside the kernel keyring. It can be either 'logon',
+    or 'trusted' kernel key type.
+
+<key_description>
+    The kernel keyring key description inlinecrypt target should look for
+    when loading key of <keyring_type>.
+
+<iv_offset>
+    The IV offset is a sector count that is added to the sector number
+    before creating the IV.
+
+<device path>
+    This is the device that is going to be used as backend and contains the
+    encrypted data.  You can specify it as a path like /dev/xxx or a device
+    number <major>:<minor>.
+
+<offset>
+    Starting sector within the device where the encrypted data begins.
+
+<#opt_params>
+    Number of optional parameters. If there are no optional parameters,
+    the optional parameters section can be skipped or #opt_params can be zero.
+    Otherwise #opt_params is the number of following arguments.
+
+    Example of optional parameters section:
+        keytype:raw allow_discards sector_size:4096 iv_large_sectors
+
+<key_type>
+    The type of the key as seen by the block layer, either standard or
+    hardware-wrapped. The string is supplied in the table as <keytype:raw>
+    or <keytype:hw-wrapped>.
+
+allow_discards
+    Block discard requests (a.k.a. TRIM) are passed through the inlinecrypt
+    device. The default is to ignore discard requests.
+
+    WARNING: Assess the specific security risks carefully before enabling this
+    option.  For example, allowing discards on encrypted devices may lead to
+    the leak of information about the ciphertext device (filesystem type,
+    used space etc.) if the discarded blocks can be located easily on the
+    device later.
+
+sector_size:<bytes>
+    Use <bytes> as the encryption unit instead of 512 bytes sectors.
+    This option can be in range 512 - 4096 bytes and must be power of two.
+    Virtual device will announce this size as a minimal IO and logical sector.
+
+iv_large_sectors
+    Use <sector_size>-based sector numbers for IV generation instead of
+    512-byte sectors.
+
+    For dm-inlinecrypt, this flag must be specified when <sector_size>
+    is larger than 512 bytes. The legacy 512-byte-based IV behavior is
+    not supported.
+
+    When specified, if <sector_size> is 4096 bytes, plain64 IV for the
+    second sector will be 1, and <iv_offset> must be a multiple of
+    <sector_size> (in 512-byte units).
+
+Example scripts
+===============
+Currently, dm-inlinecrypt devices must be set up directly using dmsetup.
+There is no userspace support yet to integrate dm-inlinecrypt with LUKS
+or cryptsetup. In particular, cryptsetup currently only supports
+dm-crypt, and cannot be used to create dm-inlinecrypt mappings.
+
+The following examples demonstrate how to create dm-inlinecrypt devices
+using dmsetup
+
+::
+
+	#!/bin/sh
+	# Create a inlinecrypt device using dmsetup
+	dmsetup create inlinecrypt1 --table "0 `blockdev --getsz $1` inlinecrypt aes-xts-plain64 babebabebabebabebabebabebabebabebabebabebabebabebabebabebabebabe 0 0 $1 0 1 keytype:raw"
+
+::
+
+	#!/bin/sh
+	# Create a inlinecrypt device using dmsetup when encryption key is stored in keyring service
+	dmsetup create inlinecrypt2 --table "0 `blockdev --getsz $1` inlinecrypt aes-xts-plain64 :64:logon:fde:dminlinecrypt_test_key 0 0 $1 0 1 keytype:raw"
+